SELKA LINAK ELECTRO sit -stand desk User Guide
- June 5, 2024
- SELKA
Table of Contents
SELKA LINAK ELECTRO sit -stand desk
INSTALLATION
Your desk is equipped with an intuitive desk panel designed for easy handling, and to help you stay active throughout a working day. You can save your own favourite sit-stand positions, get notifications of when to stand up, pair your desk with the Desk Control™ App and follow your personal statistics. Let’s start!
Adjust desk
Reach out and gently push the entire panel – either up or down – and have the desk move.
Store positions
Start by moving the desk to a position you want to store. Press the ‘star’ button for 2 seconds. In the saving process, the LED will flash twice. When the LED turns into a static white light, your current position has been stored and you can release the button.
Drive to stored positions
Push or tilt your desk panel – up or down – and hold the pressure until the desk stops at your stored position.
Sit-stand reminders
Your desk panel includes a ‘reminder’ function – an LED that shows you when it is time to stand:
- Green light: You are all balanced – no need to move yet!
- Orange light: Raise your desk, it is time for you to stand up!
Set a reminder
You get to decide how often you want to be reminded to stand, and for how long. We have pre-configured some intervals you can choose from. But, you can also set your own. Push it the ’bell’ button in order to choose which of the three intervals you prefer. The LED light intensity indicates the chosen interval:
- Interval 1 (weak LED intensity): ‘Remind me after 55 minutes of sitting’
- Interval 2 (medium LED intensity): ‘Remind me after 50 minutes of sitting’
- Interval 3 (bright LED intensity): ‘Remind me after 45 minutes of sitting
- Interval 4 (no light): ’Disable reminder’
Memory position reset
- Press and hold the ‘star’ button for 8 seconds until the light has flashed red.
Reminder reset
- Press and hold the ‘bell’ button for 8 seconds until the light has flashed red.
Desk panel factory reset
- Press and hold the ‘star’ button and ‘bell’ button for 8 seconds until the light has flashed red.
Control unit basic setting reset
- Push the panel down (in bottom position) and keep the pressure on the button 6 seconds. At certain error types this must be done twice
Desk control app (free)
By using the Desk Control™ App you get friendly reminders urge you to change position and extensive statistics show you your daily achievements. Via the app the desk can also be adjusted, and the user can drive to pre-stored memory positions. The app is available for three different platforms: iOS for iPhones and iPods, Android for Android smartphones and tablets, and a desktop version for Windows 10. MThe Desk Control™ App can be downloaded from iTunes and Apple App Store, Google Play store, and Microsoft Store.
Pair with the Desk Control App (free)
Press the ‘Bluetooth®’ button for 2 seconds to enable the pairing mode. The LED diode will flash blue. Open the Desk Control App and look for your desk in the list of “Desks nearby”. Press ’connect’ and you are ready to start using the app. See video instructions: selkastore.eu/pages/how-to-use-electro Electro troubleshooting codes