JOYO JF-03 Crunch Distortion Guitar Effect Pedal User Manual
- June 5, 2024
- JOYO
Table of Contents
Manuals
JF-03
TREMOLO
Thank you for purchasing our product, please read these instructions carefully before using them.
Warning
- Do not disassemble or repair this unit by yourself.
- Do not use or store this unit in the following circumstances: high temperature, high humidity, dirty or strong shock places.
- Do not drop off this unit or bump this unit off hard surfaces.
- Do not use cleaning liquid or alcohol to clean this unit in case of damage.
- Remove batteries if not using the unit for a long period of time.
- Please dispose of the used battery properly.
Batter replacement
- Press the front of the battery cover and then slide back to remove the cover. Take out the flat batteries.
- Put the battery into the battery compartment by placing the negative(-) pole of the battery facing inside. Insert the front of the cover and then press down and push to close.
How to use
A. To get the pedal ready by linking the connector wire.
B. INTENSITY–To adjust the mixing ratio of the delaying signal & original
signal.
C. RATE–To control and adjust the speed.
D. LED–LED indicates power statement.
E. Adapter–When you use an adapter, the battery inside will stop working
automatically.
Specifications
Input Impedance: 500K Ω
Output Impedance: 10KΩ
Running Current: 8mA
Power: 6F22 9V Battery/ DC 9V adapter
Dimension:120(L)x 72(W)x 55(H) mm
Weight:290g
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Baoan, Shenzhen, 518133
China.
www.joyoaudio.com
Email:info@joyoaudio.com Tel: 0086-755-29765381