HALCYON S701 Wall Egg Dim to Warm Light Instructions
- June 10, 2024
- HALCYON
Table of Contents
HALCYON S701 Wall Egg Dim to Warm Light
Product Information
The Wall Egg is a wall-mounted luminaire suitable for indoor and outdoor use. It has an IP54 rating, making it resistant to dust and water splashes from any direction. The product dimensions are not mentioned in the instruction leaflet. The luminaire has brown, blue, and yellow/green wire for connection to an electrical circuit. The brown wire should be connected to the live wire (L), the blue wire should be connected to the neutral (N), and the yellow/green wire should be connected to the earth. The luminaire has a light source that can only be replaced by the manufacturer or their service agent or a qualified person.The product should be installed or maintained by a qualified electrician. The main’s power should be switched off before installation or maintenance. The product should be kept away from heat sources and should be installed in a well-ventilated area. The luminaire should be kept at least 0.3m away from any lighted objects.
Product Usage Instructions
- Switch off the main’s power before installation or maintenance.
- Keep the Wall Egg luminaire away from heat sources and in a well-ventilated area.
- The installation or maintenance of the product should be carried out by a qualified electrician.
- Wire the Wall Egg luminaire to an electrical circuit, following the instructions in the leaflet. Connect the brown wire to the live wire (L), the blue wire to the neutral (N), and the yellow/green wire to the earth.
- Ensure that the luminaire is kept at least 0.3m away from any lighted objects.
- If the light source needs to be replaced, contact the manufacturer or their service agent or a qualified person.
- Switch on the mains power and turn on the luminaire using the switch (ON/OFF).
instruction Leaflet
Read this instruction carefully before commencing installation and keep it for future reference. Always switch off the mains before installation or maintenance. Keep the product far from heat sources and in a well-ventilated area. The installation or maintenance should be carried out by a qualified electrician.
- The minimum distance from the luminaire to any lighted objects shall be kept at least 0.3m.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
INSTALLATION INSTRUCTION
- Issue: 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>