ShowTop Creative Smart Nightlight Digital Alarm Clock Bedside Desk Table User Manual
- June 9, 2024
- ShowTop
Table of Contents
ShowTop Creative Smart Nightlight Digital Alarm Clock Bedside Desk Table
OVERVIEW
Function setting
- adjust the time/month button
- tune points/day / Fahrenheit and Celsius
- snooze / Lighting/button light control device
- adjust the year/hour conversion button
- function selection button
- ring alarm control knob
- battery cover
- light sensing selection button
Load the battery and start the alarm clock
- Open the battery cover (7)
- Press the battery slot at the bottom of the label to correct the three AAA battery
- Do not mix old and new batteries
Time setting
Press the function selection button (5) to set the location time. Press the
button when the transfer / transfer month (1) to the desired setting time, pay
special attention to PM and AM when the time is set to PM. Time after a PM
mark will be displayed. To adjust to the required set of minutes by adjusting
the button (2). Set the function selection button (5) to the locked position.
Alarm clock setting
Press the function selection button (5) to set the alarm clock position. Press
the button when the transfer / transfer month (1) to the desired setting time,
pay special attention to PM and AM when the time is set to PM. Time after a PM
mark will be displayed. To adjust to the required set of minutes by adjusting
the button (2). Set the function selection button (5) to the locked position.
Date setting
Press the function selection button (5) to set the alarm clock position Adjust
the year to which the required setting is set for the year. To adjust the time
/ transfer button (1) to the required set of months To adjust the date of the
required setting by the adjusting and adjusting button (2). Set the function
selection button (5) to the locked position.
12/24 hours display settings
Dial the feature selection button (5) to the time setting position Press the
adjustment button (4) / year conversion can be realized 12/24 hours display
conversion When adjusted to 24 hour display, a small “24” mark will appear in
the upper left corner Set the function selection button (5) to the locked
position.
Alarm switch state setting
Toggle the alarm control knob (6) to the open position, a alarm symbol will
appear, when arrived at the alarm time alarm will last 60 seconds Toggle the
alarm control button (6) to the off position alarm setting will be cancelled
With the use of lighting snooze function
When the alarm sound is ringing, press the snooze button (3) / light alarm
sound will stop 4-6 minutes again, at the same time Background exhibit of
lanterns were lit, the lighting button at any time by the snooze / (3)
background lights will be lit
Light sensing control function
Dial to the sensor selection button (8) to the open position, the alarm clock
will be automatically based on the intensity of the external environment to
open the background The effect of light level, if the external environment is
weak, the background light will open, and vice versa. Push the sensor
selection button (8) to the closed position to close this feature
Maintenance and storage
When the alarm clock when not in use, please do not install the battery with the original packing box. Use a soft cloth or paper towel to clean the alarm clock.. Wash with a corrosive or chemical composition. Keep alarm clock clean and dry to avoid any problems.