JOWAY H135 Wireless Hybrid Active Noise Cancelling Earbuds User Guide
- June 5, 2024
- JOWAY
Table of Contents
H135 Wireless Hybrid Active Noise Cancelling Earbuds
**User Guide
**
FCC IDÿ: 2AEZ4-H135
Schematic diagram
Built-in 60ffulAX2 battery
6 microphone call noise reduction, maintain a good call effect
8 hours of battery life per time, up to 24 hours of long battery life when used with a charging box
Wireless connection operation
Headphone connection:
- Please keep the distance between the wireless headset and the mobile phone (or other connected devices) within I meter, the closer the better:
- Open the charging box, take out the headset after It is automatically turned on, and enter the phone pairing mode (red and blue flashing alternately on one side):
- Turn on the Bluetooth function of the user’s mobile phone (or other Bluetooth devices), and search or scan. At this time, the mobile phone will search for all nearby Bluetooth devices, COO the Searched headset name: JOWAY H135 After successful pairing and connection, the headset indicator The blue and red flashes alternately to blue light on for a second and then goes out. Indicating that the pairing connection Is successful, Now you can make phone calls and listen to songs!
The two headphones are not interconnected
Please clear the pairing information of the two earphones and start the
connection. For example, when the Bluetooth of the mobile phone searches for
two ‘JOWAY H135’ pairing names, double-click and touch to make the two
earphones enter the TWS pairing state (LED blue and red flashing at the same
time), and the TWS pairing is successful After that, the unilateral blue and
red lights flash alternately before connecting to the mobile phone.
wireless devices), and search or scan. At this time, the mobile phone will
search for all nearby wireless devices. Click the searched headset name: JOWAY
H135 After successful pairing and connection, the headset indicator light The
blue light turns to steady on for 1 second and then goes out, indicating that
the pairing connection is successful! Now you can make phone calls and listen
to songs!
Product use
Headphone use
( 1 ) LED indicates status
- Mobile phone pairing status: blue and red lights flash alternately;
- Reconnect status: the blue light flashes quickly;
- Power-on state: the blue light is on for ls;
- Shutdown state: the red light is on for 2S;
- Charging status: the red light is always on;
- Charging is complete: the red light goes out;
- TWS pairing status: red and blue lights flash at the same time;
- TWS pairing success status: one headset flashes red and blue alternately, and one headset does not flash;
- The phone is paired successfully: the blue light turns on for 1 second and then goes out;
- Clear the pairing list: the red and blue lights are on for is and then the red lights are on for is.
2 Key function operation
- Turn on: Turn on the charging box and the headset will automatically turn on;
- Shutdown: Put the Bluetooth headset into the charging box and close the charging box, the headset will automatically shut down and enter the charging state;
- Reconnecting state: Pick up the Bluetooth headset from the charging box, and the headset will automatically enter the reconnecting state (about 20S) after the headset is turned on;
- Answer: When there is an incoming call, double-click any earphone to answer it;
- Hang up: In the answering state, double-click any headset touch to hang up the call;
- Incoming call rejection: When there is an incoming call, press and hold any headset for about 2 seconds to reject the call;
- Voice dialing: In the standby mode, three taps on any headset will start the Siri assistant of the Apple phone and the voice assistant of some Android phones;
- Previous song: Three-click on the right earphone in the playback state to switch between songs;
- Next song: Three clicks on the left earphone in the playing state to switch between songs;
- Pause/Play: Double-click any earphone to touch to pause/play;
- The volume defaults to the maximum volume
- Voice switching (Chinese and English): Three-click touch in an unconnected mode in single ear status (English by default, the single ear is valid);
- Manual power on When the headset is off, press and hold any headset for about 2S (the headset is not in the charging box and is off)
- Mode switching: When both ears are connected, long-press any earphone to touch to start noise reduction-transparent-normal mode (default normal mode, without memory)
- Clear the pairing list: Long press and touch for 10S in the unconnected state, and the headset will be turned off (both ears need to be operated, and a single ear is effective, the next time it is turned on, it will automatically enter the pairing mode, only clear except for mobile phone pairing information, TWS connection is not cleared)
Charging box description
Charging instructions:
-
Insert the charging cable to charge the charging box: LED lights show the power in three colors
-
Charging indicator display description:
0-33% battery power flashes red
33-66% of traffic lights flashing
66-99% green light flashes
100% green light is always on N2 -
Description of discharge indicator:
100-66% battery green light is always on
66-33% of traffic lights are always on
33-5% red light is always on
0-5% red light flashes
Charging box switch cover to display
- Open the lid of the charging box, the indicator light will light up to show the current power level, the output of the charging box will be turned off for one minute, and the headset will enter the pairing and reconnection mode. After one minute, the charging box turns on the output and enters the open charging mode. In the open charging mode, the charging box outputs 5V. At this time, the charging box detects whether the headset is fully charged. If the headset is fully charged (or taken out), the charging box will enter a low power consumption mode. The indicator light goes out;
- Put the earphones in and close the lid of the charging box. The charging box will charge the earphones. The charging box indicator light will be on to show the current battery level. When the earphones are full, the charging box and earphones will enter low power consumption mode and the indicator light will go out.
Parameter information
Product name: ANC dual noise reduction wireless headset
Model: H135
Wireless Program: Ab1562A
Wireless version: V5.2
S/N: ≥ 90dB
Support wireless profile: A2DP, HFP, AVRCP
Speaker unit: (1)10mm
Wireless working frequency: 2.402GHz-2.480GHz
The speaker resistance: 320
Frequency response: 50Hz^-20KHz
The control mode: One touching button ( TYP )
Receiving sensitivity: -96 dBm Battery: 60mAh
Music time: About 8 hours
Talk time: About 6 hours
Charging time: About 1.5 hours
Wireless range: ?10m(Open and barrier-free environment)
( TBR ): <10m(Open and barrier-free environment)
Fully charged working time: 8 hours for earphones (70% volume) + 16 hours
(recharge the charging box twice)
Product weight: 4.9g /1
Product color: Black
CHARGING CASE
Battery: 500mAh
Charging port: USB-C
Charging time: About 2.5 hours
Product weight:45.5g
Product features
- Active noise reduction and noise blocking.
- Supports transparent mode, allowing ambient sound to enter.
- IPX6 waterproof function.
- 24H using time with equipped charging case.
- Six microphones for call noise reduction.
- Soft earplugs fit the contour of the ear, in-ear structure design, comfortable and sealed.
- Automatically power on and re-connection.
Warm Prompt!
- Please don’t use a corrosive detergent to clean the product.
- please keep the product far away from hot.
- please don’t make the product be exposed to the sunlight for a long time.
- please don’t through it in the fire to avoid an explosion.
- Please don’t attempt to disassemble the product, because it doesn’t include any repair kits.
- Please don’t use the product in the rain.
- If you don’t use it for a long time, please put it in a dry environment and charge it at least once a month to prolong its service life.
- the dirty surface of the charging contacts may lead to poor contact, please clean it in time.
Notice!
- There is a danger of explosion if the battery is incorrectly replaced, only the same type or equivalent type of battery can be used for replacement.
- Batteries (battery packs or combined batteries) must not be exposed to excessive heat such as sunlight, fire, or similar.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. portable exposure condition without restriction.