gemini UHF-01 or 02 SERIES UHF Wireless Microphone User Manual

UHF-01/02 SERIES UHF WIRELESS MICROPHONE

USER’S MANUAL
Please read the manual carefully before operating
www.geminisound.com

PLEASE READ BEFORE USING THE APPLIANCE IMPORTANT WARNING AND SAFETY INSTRUCTIONS!

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an ask of electric shock to a person
READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated.
RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference.
HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
CLEANING: The product should be cleaned only with a polishing cloth or a dry cloth. Never clean with furniture wax, benzine, insecticides, or other volatile liquids since they may corrode the cabinet
ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards.
WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement or near a swimming pool; and the like.
ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall causing serious injury to a child or an adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manual-turns instructions and should use a mounting accessory recommended by the manufacturer.
CART: A product and cart combination should be moved with care. Uneven surfaces may cause the product and cart combination to overturn. See Figure A.

VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect It from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your product dealer or local power company.
LOCATION: The appliance should be installed in a stable location.
NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

GROUNDING OR POLARIZATION:

• If this product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other), it will fit Into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully Into the outlet, try reversing the plug. If the plug should still fall to fit, contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug.
• If this product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin, It will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/ NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, the location of the antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure B.

LIGHTNING: For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electricity.
OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage profits or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the Operating Instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
• if the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance, this indicates a need for service.

REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in the proper operating condition.
WALL OR CEILING MOUNTING: The product should not be mounted on a wall or ceiling.
HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

RECEIVER

PARTS DESCRIPTION

1. Power Indicator
2. ON/OFF Switch
3. RF Indicator(s)
4. Volume Control(s)
5. Antenna
6. 1/4″ Unbalanced Output Jack
7. DC Input Jack

OPERATION

1. Connect one end of supplied 6.35 mm audio cable into the AF OUT jack on the rear panel of the receiver. Connect the other end of the audio cable to the “MIC IN” or “AUX IN” amplifier or mixer.
2. Connect DC plug of supplied AC/DC adapter to DC INPUT jack on the rear panel of the receiver. Connect AC plug of AC/DC adapter to a mains power socket.
3. Press the ON/OFF button on the front panel to turn on the receiver.
4. Turn on the transmitter. RF indicator on the receiver will light.
5. Adjust receiver volume and your amplifier or mixer volume to a suitable level.

BELT PACK TRANSMITTER

PARTS DESCRIPTION

1. MIC In Jack
2. Power ON/OFF Switch
3. Microphone Volume
4. Antenna
5. Low Power Indicator
6. Power Indicator
7. Battery Compartment Cover
8. Lapel MIC
9. Headset MIC

OPERATION

1. Open the battery cover and install 2 AA batteries into the battery compartment with the correct polarity. Then close the battery cover.
2. Insert supplied headset MIC or lapel MIC into MIC IN jack. Turn the metal slip ring on the plug clockwise to thread it onto the jack.
3. Slide the power switch to the “ON” position to turn on the transmitter. The power indicator will be light green. This indicates correct operation.
4. Now receiver RF indicator will light (please confirm the frequency of the transmitter is the same as that of the receiver before operation). During operation, if the low battery indicator lights red, this indicates the battery is Please replace batteries.
5. After use, please slide the power switch to the “OFF” position to turn off the transmitter. If you are not going to use the wireless microphone system for a long period of time please take out the batteries from the transmitter to avoid possible battery leakage which may damage the

HANDHELD MIC

PARTS DESCRIPTION

1. Grille (Capsule inside)
2. Power/Low Battery Indicator
3. Power ON/OFF/MUTE Switch
4. Battery Compartment/Cover

OPERATION

1. Open the battery cover and install 2 AA batteries into the battery compartment with the correct polarity. Then close the battery cover.
2. Slide the power switch to the “ON” position to turn on the microphone. The power indicator will flash once and then go off. This indicates correct operation.
3. Now receiver RF indicator will light. (Please confirm the frequency of the transmitter is the same as that of the receiver BEFORE operation).
4. Slide power switch to center (“MUTE”) position to mute sound.
5. During operation, if the power indicator lights red, this indicates the battery is Please replace with new batteries.
6. After use, slide the power switch to the “OFF” position to turn off the microphone. If you are not going to use the wireless microphone system for a long period of time, please take out the batteries from the microphone to avoid possible battery leakage which may damage the microphone.

SPECIFICATIONS

RECEIVER
Frequency Range: 500-950MHz-
Frequency Stability: < 0.005%
Sensitivity: -100dBm
Mirror Image Rejection: >45 dB
Audio Output Level: 150mV(RMS)
S/N Ratio: >95dB
Distortion: <0.5%
Audio Output Level: <1V(10K)
Power Supply: DC12V 200MA

TRANSMITTER
Frequency Range: 500-950MHz
Frequency Stability: 1Oppm
RF Output: <10mW
Modulation: FM
Max Deviation: +75KHz
Power Supply: 3V (2 AA batteries)
Current Consumption: 100mA

WARRANTY AND REGISTRATION INSTRUCTIONS

Warranty and Repair:
All Gemini products are designed and manufactured to the highest standards in the industry. With proper care and maintenance, your product will provide years of reliable service.

LIMITED WARRANTY
A. Gemini guarantees its products to be free from defects in materials and workmanship for one (1) year from the original purchase date. Exceptions: laser assemblies on CD players, cartridges, and crossfaders are covered for 90 days.
B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance, or any repairs other than those provided by an authorized Gemini Service Center.
C. There are no obligations of liability on the part of Gemini for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, profit, or costs of removal, installation, or reinstallation. All implied warranties for Gemini, including implied warranties for fitness, are limited in duration to one (1) year from the original date of purchase unless otherwise mandated by local statutes.

RETURN/REPAIR
A. In the U.S.A., please call our helpful Customer Service Representatives at 732-346-0061, and they will be happy to give you a Return Authorization Number (RA#) and the address of an authorized service center closest to you.
B. After receiving an RA#, include a copy of the original sales receipt, with the defective product and a description of the defect. Send by insured freight to: Gemini and use the address provided by your customer service representative. Your RA# must be written on the outside of the package, or processing will be delayed indefinitely!
C. Service covered under warranty will be paid for by Gemini and returned to you. For non-warrantied products, Gemini will repair your unit after payment is received. Repair charges do not include return freight. Freight charges will be added to the repair charges.
D. On warranty service, you pay for shipping to Gemini, we pay for return shipping within the continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will be charged for freight. E. Please allow 2-3 weeks for the return of your product.
Under normal circumstances, your product will spend no more than 10 working days at Gemini. We are not responsible for shipping times.

Gemini
Worldwide Headquarters
458 Florida Grove Road
Perth Amboy
NJ 08861 USA
Tel: 732-346-0061
Fax: 732-346-0065

Register your product online at Geminisound.com for chances to win free products and learn about new upcoming releases!

FCC Rules and Regulations

IMPORTANT REGULATORY INFORMATION
This device complies with Part 15, Subpart B of FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Parts of the design of this product may be protected by worldwide patents
Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Innovative Concepts and Design LLC shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, or chemical, including photocopying and recording, for any purpose without the express written permission of Innovative Concepts and Design LLC.
It is recommended that all maintenance and service on the product should be carried out by Innovative Concepts and Design LLC or its authorized agents. Innovative Concepts and Design LLC cannot accept any liability whatsoever for any loss or damage caused by service, maintenance, or repair by unauthorized personnel.

In the U.S.A., if you have any problems with this unit, call 1-732-346-0061 for customer service. Do not return equipment to your dealer.
http://www.geminisound.com
Worldwide Headquarters
458 Florida Grove Road
Perth Amboy, NJ 08861 USA
Tel: 732-346-0061 • Fax 732-346-0065
© Innovative Concepts and Design LLC 2015
All Rights Reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>