accesstyle 79132AKS Darkslate 15W Wireless Charger User Manual

79132AKS Darkslate 15W Wireless Charger
**User Manual

**

Thank you for purchasing the Darkslate 15W Wireless charger. Please read this manual carefully and keep it for future reference.

Specifications

Package content

1. 1. Wireless charger – 1.
2. User manual – 1.
3. USB charging cable – 1.

Product appearance and functions

automatically turn off; the normal output is restored immediately after the short-circuit fault is removed.
Overload protection| Overload protection is deployed when the current output exceeds 2.1A; the normal output is restored immediately after the overload is removed.
Under-voltage protection| When the input voltage is lower than 4.5V±0.3, the device will lower output power automatically/ turn off the output to protect the main circuit.
Over-voltage protection| Over-voltage protection is deployed when the input voltage derives from the limits defined in the specifications. When the input voltage exceeds10.5V, the internal overvoltage protection is automatically deployed to protect the main circuit.
Over-temperature protection| Over-temperature protection is deployed when the device temperature exceeds 68°C; the normal output is restored after the high temperature is removed.
Metal material detection| Protection is deployed when any metal object is detected within the charging area; the normal output is restored after the metal object is removed.

Use of the wireless charger
Please use the supplied USB Type-C cable to connect the wireless charger to a power adapter of sufficient capacity. Failure to comply with this requirement will affect the wireless charger’s performance. Then plug the power adapter into a power outlet.
Note: a power adapter is not supplied with the wireless charger and should be purchased separately!
Charging your devices from the Wireless charger
Please adjust your phone on the proper position of the charging area. If your phone is equipped with a protective case made of metal material, please kindly remove the case before using the wireless charger. While charging, please do not use bus cards, bank cards, ID cards, or any other memory cards near the Wireless charger so as to ensure that the stored information is not lost. Do not put anything between the charging area and your device.
Note: If your phone is not equipped with a built-in sensor board, please kindly set it in order to enable the use of the wireless charger.
Please pay attention) Quick charge is not possible when:
– the battery charge level of your device is more than 60%;
– your device does not support a quick charge option;
– your device temperature is higher than 35-40°c
The power of the Wireless charger depends on the phone and the power adapter you use (the power adapter should be purchased separately).
Charging indication At the beginning of the charging process, the indicator will flash green and then turn off. While charging, the indicator is solid green. The indicator will be flashing green if any problem is detected.

Safety notices:

This device can be powered by a power bank or a power adapter of sufficient capacity (a power adapter is not supplied with the wireless charger and should be purchased separately). Do not disassemble, open, bend, puncture the device, affect it mechanically or immerse in liquids. Please do not place metal objects onto the device, avoid short circuits. Keep the device clean.
Do not swallow! Keep away from children! The device may shut down or the capacity may not be fully consumed when used outside operating temperature requirements (below -10°C and above +45°C).
The device must not be disposed of with household waste.
The product is to be transported in the manufacturer’s packing by all means of transport at any distance.

AccesStyle warranty terms and conditions

1. The warranty terms and conditions set forth below comply with the Russian Federation’s applicable legislation on consumer goods trading.

2. The warranty period of this product is 1 (one) year starting from the time of the original purchase.

3. The product’s lifetime is 2 (two) years and shall commence at the date of purchase, or, failing that, production date;

4. This warranty shall not apply to:
   4.1. Cables, adapters, a variety of media (discs, memory cards with software), cases, extension cables, clips, a variety of holders, packages and documents.
   4.2. Normal wear and tear or the product’s outer surface damage.
   4.3. Defects are caused by moisture, dampness, extreme temperature, microwave energy, pressure, hit, the influence of animals and insects, liquids, food, dust, and chemicals entering the product.
   4.4. Product, repaired or modified by persons, except those names in paragraph

5. 4.5. Product, misused or used in violation of the user manual.
   4.6. Defects caused by the use of incompatible equipment or accessories.

6. Warranty service shall be performed by duly authorized bodies: authorized service centers listed on the Support webpage: http://www.accesstyle.ru and available on 8-800-250-07-17. During the warranty period, any production defects shall be repaired free of charge upon presenting the filled valid warranty certificate and/ or documents indicating the proof of purchase and the date of purchase (cash receipt). The documents shall contain the model name of the product, date of purchase, and trade organization details. An authorized body shall be entitled to refuse warranty service in case of the absence of the required documents.

7. The warranty period shall be extended to the service period. Replacing of parts, components or the whole package shall not result in a new warranty period for the product or for the replaced parts.

8. Under no circumstances shall the Producer, Importer, and organizations authorized by the Importer be liable for any direct, indirect, incidental, special, or consequential damage or including but not limited to, any loss of profit, loss/ loss of use of information, or data; information or data restoration costs, loss arising out of the use or inability to use AccesStyle products resulted in interruption of a commercial, production or other activity.

Warranty certificate
Product name: serial number:…………………..
Date of purchase:……………………….
Signature of the salesperson:…………………….
Trade organization name and address:……………………..
The quality of the product has been checked in my presence, I have no claims. I have obtained the full and complete product. I hereby declare that I have read and agree with the warranty terms and conditions………………
Customer signature………………………..

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>