BYOPLANET ByoPack Electrostatic Sprayer Owner’s Manual
- June 5, 2024
- BYOPLANET
Table of Contents
BYOPLANET ByoPack Electrostatic Sprayer-prod
Instruction
- REMOVE GROSS SOIL using normal cleaning protocols. Then close area to the public by placing a “Cleaning in Progress” sign outside.
- PUT ON THE APPROPRIATE PPE. Refer to product specifi c Safety Data Sheets for specifi c PPE requirements.
- MOUNT DESIRED SOLUTION IN BACKPACK with bottle opening below the dispensing tube and connecting the dispensing cap to the bottle.
- REMOVE SPRAY WAND FROM STRAP and thread the extension cord through the strain relief. Plug into the wall. NOTE: Do not tie the extension cord and power cord together. Doing so will result in damage to cords.
- PUT ON BACKPACK. Check harness is on the proper setting for your height. Fasten straps securely and adjust if necessary. NOTE: Follow the backpack harness adjustment instructions in the operator’s manual.
- WITH THE WAND FIRMLY IN HAND, PRESS AND RELEASE THE MAIN POWER BUTTON. Main power button will illuminate blue and air fl ow will begin.
- PRESS THE SPRAY BUTTON ONCE to initiate spraying. The first time you spray, point the wand into a corner or drain, press the spray button, and wait up to 25 seconds to generate a steady flow. Press once to stop.
- SPRAY THE DESIRED SURFACES FROM 2–4 FEET AWAY using a slow, sweeping motion. Refer to specifi c product label for contact times and usage instructions.
- WHEN FINISHED unfasten safety straps and remove the backpack. Remove the container and purge the system until no liquid comes out of the nozzle. Unplug the power cord.
- WHEN READY TO STORE THE DEVICE, SECURE THE EXTENSION CORD AND SPRAY WAND using the straps on the side of the backpack.
References
Read User Manual Online (PDF format)
Loading......