PHOENIX CONTACT 2403869 AXL F BK PN TPS Bus Coupler Owner’s Manual
- June 16, 2024
- PHOENIX CONTACT
Table of Contents
AXL F BK PN TPS – Bus coupler
2403869
https://www.phoenixcontact.com/us/products/2403869
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid.
Axioline F, Bus coupler, PROFINET, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector
Product description
The bus coupler is intended for use within a PROFINET network. The bus coupler creates the link to the Axioline F I/O system and the industrial I/O signals connected to it. Up to 63 Axioline F devices can be connected to the bus coupler. Device descriptions for Phoenix Contact controllers are integral parts of the engineering tools PC Worx and PLCnext Engineer. Corresponding GSDML files are available for integrating the Axioline Fstation into other programming systems. These files can be downloaded at:
Your advantages
- 2 Ethernet ports (with integrated switch)
- Conformance with PROFINET specification V2.3
- Supports PROFIsafe
- Supports PROFIenergy
- Supports PROFINET S2 system redundancy (firmware version 1.30 or later)
- PROFINET RT and IRT
- Minimum cycle time of PROFINET for RT and IRT is 250 μs
- Firmware can be updated
- Runtime in bus coupler is negligible (almost 0 µs)
- Typical cycle time of the Axioline F local bus is around 10 μs
- Web-based management
- Supports the operation of Axioline Smart Elements
- Supports passive Smart Elements (firmware version 1.30 or later)
- Supports IOL-CONF (firmware version 1.30 and later)
- Supports Diag+
- Safe analog value processing with SAFE AI and other components
Commercial data
| Item number | 2403869 |
|---|---|
| Packing unit | 1 pc |
| Sales key | DR02 |
| Product key | DRI21A |
| Catalog page | Page 69 (C-6-2019) |
| GTIN | 4055626345826 |
| Weight per piece (including packing) | 221.4 g |
| Weight per piece (excluding packing) | 220.8 g |
| --- | --- |
| Customs tariff number | 85176200 |
| Country of origin | DE |
Technical data
Dimensions
Dimensional drawing|
---|---
Width| 45 mm
Height| 126.1 mm
Depth| 74 mm
Note on dimensions| The depth applies when a TH 35-7.5 DIN rail is used (in
accordance with EN 60715).
Notes
Utilization restriction
EMC note| EMC: class A product, see manufacturer’s declaration in the download
area
---|---
Interfaces
PROFINET
| Number of interfaces | 2 |
|---|---|
| Connection method | RJ45 jack |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission speed | 100 Mbps (full duplex) |
| Transmission physics | Ethernet in RJ45 twisted pair |
Axioline F local bus
| Number of interfaces | 1 |
|---|---|
| Connection method | Bus base module |
| Transmission speed | 100 Mbps |
Service
| Number of interfaces | 1 |
|---|---|
| Connection method | USB type C |
System properties
System limits
| Number of supported devices | max. 63 (per station) |
|---|---|
| Number of local bus devices that can be connected | max. 63 |
PROFINET
| Device function | PROFINET device |
|---|---|
| Specification | Version 2.3 |
| Conformance Class | Conformance-Class C |
| Device ID | 1000hex |
| Vendor ID | 00B0hex |
Product properties
| Type | block modular |
|---|---|
| Product type | I/O component |
| Product family | Axioline F |
| Mounting position | any (observe temperature derating) |
| Scope of delivery | including bus base module and Axioline F connector |
Insulation characteristics
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
|---|---|
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Electrical properties
| Maximum power dissipation for nominal condition | max. 2.5 W |
|---|
Potentials: Communications power UL feed-in (the supply of the Axioline F local bus UBus is generated from UL)
| Supply voltage | 24 V DC |
|---|---|
| Supply voltage range | 19.2 V DC … 30 V DC (including all tolerances, including |
ripple)
Current draw| max. 600 mA (2.0 A at UBus, UL = 24 V, up to HW 03)
max. 700 mA (2.5 A at UBus, UL = 24 V, from HW 04)
Power consumption| max. 14.4 W (2.0 A at UBus, UL = 24 V, up to HW 03)
max. 16.8 W (2.5 A at UBus, UL = 24 V, from HW 04)
Protective circuit| Surge protection; electronic
Reverse polarity protection; no
Potentials: Axioline F local bus supply (UBus)
| Supply voltage | 5 V DC (via bus base module) |
|---|---|
| Power supply unit | max. 2 A (up to HW 03) |
max. 2.5 A (As of HW 04)
Electrical isolation/isolation of the voltage ranges
Test voltage: PROFINET interface 1 / PROFINET interface 2| 1500 V AC, 50 Hz, 1
min.
---|---
Test voltage: PROFINET interface 1 / 24 V communications voltage (UL) feed-in|
1500 V AC, 50 Hz, 1 min.
Test voltage: PROFINET interface 2 / 24 V communications voltage (UL) feed-in|
1500 V AC, 50 Hz, 1 min.
Test voltage: PROFINET interface 1 / functional ground| 1500 V AC, 50 Hz, 1
min.
Test voltage: PROFINET interface 2 / functional ground| 1500 V AC, 50 Hz, 1
min.
Test voltage: 24 V communications voltage (UL) feed-in / functional ground|
500 V AC, 50 Hz, 1 min.
Connection data
Connection technology
| Connection name | Axioline F connector |
|---|---|
| Note on the connection method | Please observe the information provided on |
conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor connection
| Connection method | Push-in connection |
|---|---|
| Conductor cross section rigid | 0.2 mm²…. 1.5 mm² |
| Conductor cross section flexible | 0.2 mm²…. 1.5 mm² |
| Conductor cross section AWG | 24 … 16 |
| Stripping length | 8 mm |
Axioline F connector
| Connection method | Push-in connection |
|---|---|
| Note on the connection method | Please observe the information provided on |
conductor cross sections in the “Axioline F: system and installation” user
manual.
Conductor cross section, rigid| 0.2 mm²…. 1.5 mm²
Conductor cross section, flexible| 0.2 mm²…. 1.5 mm²
Conductor cross section AWG| 24 … 16
Stripping length| 8 mm
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)| -25 °C … 60 °C (Mounting position: wall
mounting on horizontal DIN rail)
---|---
-25 °C … 55 °C (Mounting position: any)
Degree of protection| IP20
Air pressure (operation)| 70 kPa … 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)| 70 kPa … 106 kPa (up to 3000 m above sea
level)
Ambient temperature (storage/transport)| -40 °C … 85 °C
Permissible humidity (operation)| 5 % … 95 % (non-condensing)
Permissible humidity (storage/transport)| 5 % … 95 % (non-condensing)
Standards and regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
|---|
Mounting
| Mounting type | DIN rail mounting |
|---|---|
| Mounting position | any (observe temperature derating) |
Drawings
Connection of the cables
Internal wiring of the terminal points
Approvals
To download certificates, visit the product detail page:
https://www.phoenixcontact.com/us/products/2403869
DNV GL
Approval ID: TAA00000DF
LR
Approval ID: LR2001902TA-08
NK
Approval ID: 14A006
BV
Approval ID: 36433/B4 BV
PRS
Approval ID: TE/1020/880590/21
BSH
Approval ID: 840
RINA
Approval ID: ELE008423XG
ABS
Approval ID: 20-2059154-PDA
PROFINET
Approval ID: Z12930
UAE-RoHS
Approval ID: 23-02-63241
cULus Listed
Approval ID: E238705
Classifications
ECLASS
| ECLASS-11.0 | 27242608 |
|---|---|
| ECLASS-12.0 | 27242608 |
| ECLASS-13.0 | 27242608 |
ETIM
| ETIM 9.0 | EC001604 |
|---|
UNSPSC
| UNSPSC 21.0 | 32151600 |
|---|
Environmental product compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 years |
| --- | --- |
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”
Accessories
AXL F BS BK – Bus connector
2701422
https://www.phoenixcontact.com/us/products/2701422
Axioline F bus base module for housing type BK
FL PLUG RJ45 GR/2 – RJ45 connector
2744856
https://www.phoenixcontact.com/us/products/2744856
RJ45 connector, design: RJ45, degree of protection: IP20, number of positions:
8, 1 Gbps, CAT5 (IEC 11801:2002), material: Plastic, connection method: Crimp
connection, connection cross section: AWG 26- 24, cable outlet: straight,
color: gray, Ethernet
FL PLUG RJ45 GN/2 – RJ45 connector
2744571
https://www.phoenixcontact.com/us/products/2744571
RJ45 connector, design: RJ45, degree of protection: IP20, number of positions:
8, 1 Gbps, CAT5 (IEC 11801:2002), material: Plastic, connection method: Crimp
connection, connection cross section: AWG 26- 24, cable outlet: straight,
color: green, Ethernet
FL CAT5 HEAVY – Data cable
2744814
https://www.phoenixcontact.com/us/products/2744814
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm2, solid conductor, shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter
FL CAT5 FLEX – Installation cable
2744830
https://www.phoenixcontact.com/us/products/2744830
By the meter, Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL 5021, 4-wire (2x2xAWG26/7, SF/UTP), color single wire: white/orange-orange, white/green-green, cable length: Free entry (1. 0 … 1000.0 m)
FL CRIMPTOOL – Assembly tool
2744869
https://www.phoenixcontact.com/us/products/2744869
Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45…, for assembly on site
ZB 20,3 AXL UNPRINTED – Zack marker strip
0829579
https://www.phoenixcontact.com/us/products/0829579
Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMSP1-PLOTTER
ZBF 10/5,8 AXL UNPRINTED – Zack Marker strip, flat
0829580
https://www.phoenixcontact.com/us/products/0829580
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.15 mm, lettering field size: 4 x 10, 15 x 5 mm, 1 x 5.8 x 5 mm, Number of individual labels: 50
EMT (35X18,7)R – Insert label
0801831
https://www.phoenixcontact.com/us/products/0801831
Insert label, for marking Phoenix Contact Axioline modules, Roll, white,
unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL
2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600,
THERMOMARK X1.2, mounting type:
insert, lettering field size: 35 x 18.7 mm, Number of individual labels: 500
SAFE AI – Function block
2400057
https://www.phoenixcontact.com/us/products/2400057
Function block library for safety-related analog value acquisition with standard I/O modules. Please contact the safety hotline (+49 5281 9-462777) before ordering the SAFE AI article.
CAB-USB A/ USB C/1,8M – Connecting cable
2404677
https://www.phoenixcontact.com/us/products/2404677
Connecting cable, for connecting the controller to a PC from USB A to USB C
CAB-USB C/ USB C/1,8M – Connecting cable
1021809
https://www.phoenixcontact.com/us/products/1021809
Connecting cable, for connecting the controller to a PC from USB C to USB C
Phoenix Contact 2024 © – all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
References
- ZB 20,3 AXL UNPRINTED - Zack marker strip - 0829579 | Phoenix Contact
- ZBF 10/5,8 AXL UNPRINTED - Zack Marker strip, flat - 0829580 | Phoenix Contact
- SAFE AI - Function block - 2400057 | Phoenix Contact
- FL CAT5 HEAVY - Data cable - 2744814 | Phoenix Contact
- FL CAT5 FLEX - Installation cable - 2744830 | Phoenix Contact
- FL PLUG RJ45 GR/2 - RJ45 connector - 2744856 | Phoenix Contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>