Homtime S1-QI Bluetooth Speaker System with Alarm Clock Wireless Charging Station User Manual

Homtime S1-QI Bluetooth Speaker System with Alarm Clock Wireless Charging

Station

KNOW THESE SAFETY SYMBOLS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electric shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation mark’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot)

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with the manufacturer’s instructions.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus {including amplifiers) that produce heat.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.

Setup to BLUETOOTH FUNCTION

INFORMATION

WHAT IN THE BOX

• S1-QI Body Unit 1 PCS
• Power Adaptor 1 PCS
• User Manual 1 PCS
• Audio Cable 1 PCS
• Button Battery 1 PCS

PRODUCT FEATURES

1. Stereo speaker, providing superior quality sound
2. Bluetooth Hands-Free call
3. 3.2 inch backlit LCD with 3 levels dimming
4. FM digital radio
5. 3.5mm audio jack for connecting other audio sources
6. Single USB charging port
7. Dual alarms
8. USB playing supports MP3/WAV format
9. Wireless charging for Qi-enabled cellphones
10. 12H/24H switch
11. Snooze/Sleep function

SPECIFICATIONS

• Bluetooth profiles: HSP, HFP, A20P and AVRCP

• Bluetooth frequency range: 2.402GHz – 2.480GHz

• Operating distance: 32,8 feet

• Operation Vo/raga: DC 5V3A

• Output lower: 3w + 3w

• Driver Unit: 40hm 3w 2in

• Frequency range: 40Hz- 20KHz

• SIN Ratio: >65d8

• Distortion Rate: <1%

• FM Fn,qusncy Range: 87.5 – 108MHz

• Wireless Charging current: 300 – 6DOmA

• Product information is subject to change without prior notice.

UNIT FEATURES & FUNCTIONS

BUTTON

| FUNCTION

Power ON, OFF

---|---
SLEEP| SNOOZE90-80-70-60-50-40-30-2D-100FFminute
MODE, SETTING| Switch Modes, Alarm lime Hitting
ALARM 1| time Setting of Alarm 1
ALARM 2| Time Setting of Alarm 2
VOL-,TIME-| Volume down/ AdJU&ling Alarm lime
SONG| Skip Backwards last song
PI.AY, PAUSE. TALK. SCAN| Bluetooth 1k USB. Play/Pllu1e, Answer the phone and Hang u Auto scan FM station
SNOOZE, LED| SNOOZE, Disph1y BrightnGSS UIVlll (4 LGVI.II: 1-2-3-4)

Skip Forwards next song

VOL+, TIME+| Volume up/ AdjUl’Cing Alarmlime
wireless charging| mobile dwic:9 is placed on the charging surface. mobile device may circle the property.

BASIC

• POWER ON
  Connect the power cable into the jack on the back of S1-01 labeled” “, and then plug the power cable into the USB charger. The LCD display turns on. Press ”  POWER ” to turn on the unit.

• SET TIME
  Under any mode, press ” ” to set time. Press “+” or “- ” to switch the Hour mode between 12-Hour and 24-Hour. Press ” ” to confirm it. Then Hour figure and MINUTE figure begin to flash. Press”+ ” or”- ” to adjust the HOUR and press .DE” to confirm it, then press “+” or” – ” to adjust the MINUTE and press ” ” to confirm the setting. It exits the setting in 1 0seconds if no operation on any key.

• SET AIARM TIME
  Under any mode, press ” ” to enter alarm time setting, ” ” icon displays in the LCD. Press ” “sometimes to display OFF/BU. (OFF- none alarm is selected). When BU icon appears, press to enter alarm time setting. The HOUR figure begins to flash, then press +” or”- ” on the top side of the unit to adjust the figure; Press , the MINUTE figure begins to flash. Press “+” or .. _ ., to adjust the figure. It will exit the setting in 5 seconds if no operation on any key.

WIRELESS CHARGE

CAUTION

• Wireless charging covers are sold separately.
• Use only JBlab – approved adapter. Unauthorized chargers may cause damage or the wireless charger may malfunction ..
• Do not place the wireless charging cover solely on the wireless charger. Doing so may overheat the wireless charger and cause a fire. It may also result in serious burn or device malfunction.
• To charge a mobile device that does not have a built-in wireless charging coil, attach a wireless charging cover to the mobile device. Then, place the mobile device on the wireless charger.
• Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. The mobile device may not charge properly or may be damaged due to overheating.
• When the mobile device is fully charged, remove it from the wireless charger.
• When the mobile device is not placed on the charging surface properly, or depending on the location of the mobile device’s wireless charging coil. your mobile device may not charge properly.
• Depending on the location of the mobile device’s wireless charging coil, your mobile device may not charge properly.
• Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the wireless charger.
• If you use the wireless charger in areas with weak network signals, you may lose network reception.
• If you connect a charger to the mobile device during wireless charging, the wireless charging feature will be unavailable.
• The wireless charger is compatible with Wireless Power Consortium (WPC) certified devices.

FAQs

CARE AND MAINTENANCE
Read the following recommendations before using S1-QI . Following these you will be able to enjoy our product for many years.

1. Keep the product dry and don’t put it in a damp place to avoid the product’s internal circuit being affected.
2. Keep the product away from direct sunlight or hot places. The high temperature will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
3. Don’t expose the product to cold areas as it may damage the internal circuit board.
4. Don’t Try to disassemble the product as it may {JBt damaged if you are not professional.
5. Don’t let the product fall down onto the floor or other hard surfaces. The internal circuit might get damaged.
6. Don’t use intensive chemical products or detergents to clean the product.
7. Don’t scratch the surface with sharp things.

• What to do when tilers is no sound when making a call withS1-QI?

  1. Ensure S1-0I connects well with 8/uetoath mobile phone
  2. Ensure the volume has already been properly adjusted
  3. Make sure the audio input of car audio system is adjusted to AUX

• What to do when my mobile phone can not search andfindS1-QI?
  If s1-01 is not in pairing mode, your mobile phone can’t ‘find it. Please make sure s1-01 is in pairing mode and in the effective working range.

• What to do when the voice is not clear?

  1. Ensure your mobile phone is in strong-signal areas.
  2. Ensure s1-01 is in the effective working range.

When you use the USB power supply cable, it can occur that a charging delay and being not charged phenomenon. To charge battery effectively, please use the AC adapter.\

Notice
Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered t,y the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. correct: disposal of your old product helps to prevent PCR tential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rulss on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

FCC Caution

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

FCC Caution.
This device complies with part 15 of the FC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>