boAt ROCKERZ ENTICER Premium Wireless Earphone User Manual
- June 10, 2024
- Boat
Table of Contents
boAt ROCKERZ ENTICER Premium Wireless Earphone
PACKAGE CONTENTS
- Ix boAt Rockerz Enticer
- 2x Additional Earmuffs
- 1x Type-C Charging Cable
- 1x Warranty Card
- 1x Catalogue
- 1x User Manual
OVERVIEW
POWER ON:
When switched off, long press the MFB (Multifunction Button) for 3 seconds.
The blue and red LEDs start flashing alternatively after the initial blue LED
flash for a second,
POWER OFF:
Long press the MB for 5 seconds. Red LED blinks once to indicate the device
getting switched off,
FUNCTIONALITIES
- Turn on the Bluetooth functionality on your phone and switch on Rockerz Enticer
- The neckband’s indicator starts blinking in blue and red alternatively to indicate that the earphones have gone into pairing mode
- Then, select ‘Rockerz Enticer’ from the list of available devices after the search
- If asked for a passkey, confirm the passkey ‘0000’ on the phone
- Once confirmed, the neckband and phone get connected via Bluetooth indicated by a voice prompt
- Note: if there’s a connection history between the phone and the neckband, then they automatically get reconnected in a working range whenever the neckband gets switched on while the phone’s Bluetooth mode is turned on.
- If there’s no pairing established in 5 minutes then the neckband gets automatically switched off.
BASIC FUNCTIONS
CONNECTING ROCKERZ ENTICER SIMULTANEOUSLY WITH 2 DEVICES
- Firstly, connect the earphone to one of the devices.
- Then, switch both the earphone and the device’s Bluetooth off.
- Thereafter, connect the earphone to the second device,
- Again, switch the first device’s Bluetooth on. The earphone gets connected to both devices.
QUICK-SWITCH BUTTON
- It helps in switching between two connected media devices. Double-pressing the Quick-Switch button switches active connection between different paired devices, such as between your phone and your tablet.
- Short press the Quick-Switch button to activate/deactivate BEAST Mode for low latency. BEAST™ MODE Short press the Quick Switch Button to switch to Low Latency mode, also known as the BEAST’* Mode. Once switched on, it gets notified via a sound prompt. Short press the Quick Switch Button once again to turn it off and return to Music Mode. Made for the Gamers – By Gamers, BEAST Mode reduces the latency significantly and improves the overall gaming experience
CHARGING
- Connect one end of the provided cable to the USB Type C port on the headset and the other end to a wall adapter or laptop
- While charging, the indicator LED turns into steady red
- Once the headphone gets fully charged, the indicator turns off
Note:
- Use only authorized/company chargers for the headset, as unauthorized ones may damage the same and invalidate the warranty on the headset as well The earphones cannot be utilized for the purpose of listening while it is in charging mode
ENx™ TECH
- Our ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls.
- One need not activate ENx™ as the mic is equipped with the same and activated by default. Deliver your voice without interruptions anywhere – traffic, railway stations, airports, workspace; literally anywhere!
OTHER FUNCTIONS
- If you receive an incoming call during playing music, the music automatically disconnects. When the call is done and disconnected, the music starts to play automatically from where it left
ANOMALIES & SOLUTIONS
A. Mobile can’t search the headset
- Check if the Bluetooth headset is powered on or off (When powered on, the LEDs blink with red and blue colors alternatively)
- If it is powered on and the device still can’t connect, then please reboot the headset device and the phone
- B. After connecting the headset with the phone, disconnection or noise occurs
- This may be due to the low power of the headset. Please charge the Bluetooth headset
- There might be an obstruction between the headset and the phone or the distance between them exceeds the maximum range for signal reception
- If the Voice Assistant support doesn’t respond If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device’s settings
SPECIFICATIONS
SAFETY PRECAUTIONS
- This is not a toy. The children are advised to use this under adult supervision,
- Avoid exposing the device to extremely hot or cold temperatures. Avoid using the neckband for listening to full volumes in order to protect from hearing damage.
- Please do not use the device under thunderstorms. Don’t dismantle the product in any way. Please don’t clean the product using oily volatile liquid.
Read User Manual Online (PDF format)
Loading......