Anker PowerPort III 25W User Manual
- June 5, 2024
- Anker
Table of Contents
Anker PowerPort III 25W
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during the use of the appliance must not exceed 35°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi
Specifications
- Input
- Output
- Average active efficiency
- Efficiency at low load (10%)
- No-load power consumption
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2058 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/ EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com
Customer Service
support@anker.com support.mea@anker.com (For Middle East and Africa Only)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>