sygonix 2361759 Wi-Fi Water Detector Instruction Manual

sygonix 2361759 Wi-Fi Water Detector

Intended use

This product is a Wi-Fi-enabled water sensor that can be used to detect flooding. When the sensor detects water, an alert will sound and a push notification will be sent to your mobile device via an app. The sensor and cable can be submerged in water but the main unit must not get wet! If you use the product for purposes other than described above, it may be damaged. In addition, improper use can cause hazards such as an electric shock, short circuit, fire, etc. Read the operating instructions carefully and store them in a safe place. Pass on the product to third parties only along with the product documentation. This product complies with statutory national and European regulations. All company and product names are trademarks of their respective owners. All rights reserved.

Explanation of symbols

The symbol with an exclamation mark in a triangle is used to highlight important information in these operating instructions. Always read this information carefully. The arrow symbol indicates special information and tips on how to use the product.

Delivery content

• Product
• Adhesive tape
• 2x mounting screws
• Operating instructions

Safety instructions

Read the operating instructions and safety information carefully. If you do not follow the safety information and information on proper handling in these operating instructions, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
eneral

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, steam and solvents.

• Do not place the product under any mechanical stress.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

• Consult an expert when in doubt about the operation, safety or connection of the appliance.

• Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.

• If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
  b)Mounting

• When drilling/screwing, make sure there are no cables, wires, or pipes located underneath the surface.

• Inadvertently puncturing electric cables can cause life-threatening electric shock!

Operating elements

1. Reset button (inside)
2. Batteries compartment (inside)
3. Status indicator
4. Cable
5. Probe tip
6. Mounting hole

Insert batteries

1.  Slide the cover off as shown.
2.  Insert 2x 1.5 V AAA batteries matching polarity as shown inside.
3.  Slide the cover to close. When the product is connected to the app, the battery status will show on the app interface

“Smart Life – Smart Living” App

Compatible AndroidTM and iOS apps are available from their respective app stores. Search: “Smart Life – Smart Living”.
Note

• This device is only compatible with 2.4 GHz networks.
• Enter the exact Wi-Fi name (case sensitive).
• Have the password for your Wi-Fi router ready.
• Connect the mobile device to the same Wi-Fi network the product will connect to.
• If you are giving the product to a third party you did not “Share Device” with, you must first “Remove Device” from the settings menu.

Conrad Connect

Pairing with application

1.  “Add Manually” → “Sensors” → “Sensor (Wi-Fi)”.
2.  Enter “Wi-Fi Name” and “Password” → “Next”.
3.  Select a pairing method: – “EZ Mode” – “AP Mode”
4.  Follow the on-screen instructions to complete the pairing process

Compatible with IFTTT

1.  Install and launch the “IFTTT” app on your device.
2.  Search “Smart Life”
3.  Create an account and login.
4.  Create your own applet.

Mounting

Location
The sensor and cable can be submerged in water but the main unit must not get wet!

Product

1.  Remove the 2x small circular speaker cutouts from the adhesive tape.
2.  Remove one side of the tape backing and apply it to the main unit cover.
3.  Remove the other side and adhere the product to the mounting surface.

Sensor

• Consider the water level of potential leaks when positioning the sensor.
• The probes should be the point of first contact.
• Drill a hole and use a screw to attach the sensor via the mounting hole

Operation

If water bridges the probe contacts, an alert will sound for 5 mins and a push notification will be sent to your mobile device.

Test the probe
Test the product is operating correctly by placing the probe tips against a moistened cloth or palm of your hand.

Disable flood alert
Press the reset button to disable the alert sound.

Reset device
If the device is not functioning correctly or you cannot connect to Wi-Fi, you may need to perform a reset:

• Press and hold the reset button for 5 seconds.
• The device will enter pairing mode after reset.
• The product will be removed from the app and you will need to repeat the paring process

Maintenance and cleaning

Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause damage to the housing and malfunctioning.

• Clean the product with a dry, fiber-free cloth.
• If submerged in saltwater, rinse the cable and sensor with fresh water.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive. Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

Technical data

General

• Power supply…………………………….2x 1.5 V AAA batteries
• Battery life…………………………………approx. 1.5 yrs
• Current consumption ………………….Standby: 50 μA
• Alarm volume…………………………….max. 70 dB
• Operating/Storage conditions………-20 to +40 ºC, 0 – 85 %
• RH (non-condensing)
• Dimensions (W x H x D) ……………..64 x 23 x 72 mm
• Weight ……………………………………..47 g (without batteries)

Wireless connectivity

• Bandwidth…………………………………min. 10 Mbps upload speed
• WLAN technology………………………IEEE 802.11 b/g/n, 2.4 GHz
• WLAN security…………………………..WEP, WPA, WPA2
• Frequency…………………………………2.412 – 2.484 GHz
• Transmission power……………………+14 dBm
• Transmission distance………………..max. 50 m

Application software

• Supported OS……………………………Android 6.0 (or higher), IOS 7.0 (or higher)

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>