V-TAC VT-2424 LED Sync Controller Instruction Manual
- June 3, 2024
- V TAC
Table of Contents
V-TAC VT-2424 LED Sync Controller
TECHNICAL DATA
- Model VT-2424
- Output 4 Channels
- Output Current <6.0A (Each Channel)
- Output Power 12V:288W, 24V:576W
- Supply Voltage DC: 12V-24V
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
This marking indicates that this product should not be disposed of with other household wastes. Caution, risk of electric shock.
PRODUCT DESCRIPTION
Led RGBW Controller adopts the most advanced PWM (Pulse Width Modulation) digital technology with 4 channels constant voltage led RGBW controller. This model designed for RGBW/Y led products. Adopts RF 24 key remote, RGB and W each have independently control area without interference. Especially, it is designed with synchronization function. It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands of meters led strips. In theory, they can be connected numerous
DIRECTION OF USE
Adopt RF wireless 24-key remote control, function of each button as below:
If new-coded-remote is needed, re-pairing the remote and the receiver before using as below operation instruction:
- Step 1: Pressing key “Seven colors gradually change” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
- Step 2: Continuously to press the key “Seven colors gradually change “ for 3 times with in 5 seconds after step 1 ,the brightness of LEDs will change from 50% -10% as responding.
- Code learning successfully, the LEDs will be back to the state before the power off, and the receiver can control by the remote.
If not, please re-operate from step 1 to 2.
TYPICAL APPLICATIONS
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B