Shenzhen Junruicheng Electronics WG-215 Wireless Charging Pad User Manual
- June 5, 2024
- Shenzhen Junruicheng Electronics
Table of Contents
Shenzhen Junruicheng Electronics WG-215 Wireless Charging Pad
Product Specification
- Model: WG-215
- Input: DC 12V-2A
- Output: 10w *2
- Wireless Charging Standard: Qi Compatible
- Working Distance: 4-8mm
- Power Charging: For 2 Devices
Direction For Use
Caution:
Please use the plug that was included in the package.
Other plugs may influence charging efficiency.
Charging Two Mobile Phones
Two mobile phones can be charged simultaneously.
The Package Includes:
- Wireless Charging Pad: *1
- DC 12V/2A Plug: *1
- User Manual: *1
Cautions
- Do not exert excess force on the product.
- Do not disassemble the product or let it come into direct contact with heat or water.
- Be careful when using the product in a hot or humid environment which may damage the circuit.
- The magnet may cause the product to break or malfunction; do not place cards with embedded magnetic chips(e.g.ID cards, credit cards) near the product.
- Medical devices (e.g.pulse measuring device, hearing aid) may indirectly interfere with the product; keep them at least 20cm away from the product.
- Keep out of reach of children.
- The product image herein is provided as an example and user guide for the portable high-speed wireless charger; it may differ from the actual product.
- For smartphones that do not support wireless charging, you need to use a separate wireless charging path or wireless charging case.
When an abnormality is detected:
Adjust the position of the smartphone.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.