TRANSGO LJ4AEL Shift Kit 1995-03 Mazda Millenia-S 2.3L Owner’s Manual

TRANSGO LJ4AEL Shift Kit 1995-03 Mazda Millenia-S 2.3L4

This Kit is about: Prevents Clutch Drum Blowout and Planetary failures caused by Hi-line and Low-Lube . Falls out of gear at stop sign, hot. Burns 3-4 clutches. No 2nd. No 3rd after a 3-2 or 4-2 kick down. Direct clutch (3rd) inner seal leaks. Corrects Soft 1-2 and 2-3.

Hello Mechanic:
Install the accumulator valve first. Then install the flat washer on the stem of accum valve, then the remaining parts as shown.

Small Plate

Main Plate

Intermediate Valve Body

Main Valve Body

Hi-Temp Low-Shrink Rings

1. Forward & Lube Rings
   Use Trans Jel and GENTLY push rings down into grooves. Ends of rings should just touch or have small gap. If pushed together FIRMLY they BIND in groove & WON’T SEAL.

2. Reverse Rings
   Fill grooves with Trans Jel or Vaseline. Install Expander Wires, then two Rings.
   LISTEN UP: Some models have shallow grooves. Rings MUST push flush into the grooves. If rings wont push flush don’t use wire.

3. Third Clutch (Direct) Inner Piston Seal
   Insert overlap part of Wire into groove at 6 O’clock. Then shape the Seal as shown and install into the piston groove.

Step 1: Remove and discard original hard washer.
Step 2: Install Cushion Seat and the PLAIN spring.
Step 3: Install PLAIN spring over lip on the 2nd piston as shown. Use smallest end of spring that fits snug.

Torque valve body bolts to 90 IN. LB.

Documents / Resources

| TRANSGO LJ4AEL Shift Kit 1995-03 Mazda Millenia-S 2.3L [pdf] Owner's Manual
LJ4AEL Shift Kit 1995-03 Mazda Millenia-S 2.3L, LJ4AEL, Shift Kit 1995-03 Mazda Millenia-S 2.3L, Kit 1995-03 Mazda Millenia-S 2.3L, Mazda Millenia-S 2.3L
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>