VICTRIX 051-083 Pro FS Digital Arcade Fight Stick User Guide
- June 5, 2024
- VICTRIX
Table of Contents
VICTRIX 051-083 Pro FS Digital Arcade Fight Stick
QUICK START GUIDE
ATTACHING AND DETACHING JOYSTICK
The JOYSTICK is stored inside the rear compartment.
Pull the outer metal shaft towards the ball top to attach and detach it.
TIGHTEN / LOOSEN BALL TOP
The ALLEN WRENCH is stored inside the rear compartment. Insert the ALLEN WRENCH into the JOYSTICK shaft. Rotate the ball top clockwise to tighten and counter-clockwise to loosen.
VOLUME CONTROLS
- Press and hold the AUDIO BUTTON.
- Move the JOYSTICK up/down to adjust volume/gain levels.
- Double tap the AUDIO BUTTON to mute the microphone.
- Double tap the AUDIO BUTTON again to un-mute the microphone.
CHANGING LIGHTING COLOR
- Press and hold the LIGHTING BUTTON.
- Move the JOYSTICK left/right to initiate lighting transition.
- Let the JOYSTICK go to fix the selected color.
To change the lighting mode, toggle the LIGHTING BUTTON.
REMAPPING THE PRO BUTTONS
- Press the BUTTON and the PRO BUTTON you want to program together for 3 seconds until the PRO BUTTON lights begin to flash.
- Let go of both buttons, then press the button you want to assign the PRO BUTTON to. All of the back-lit buttons will flash twice to indicate the programming was successful.
- To reset the PRO BUTTON to the factory default (L3):
Press the BUTTON and the PRO BUTTON you want to restore to default together and quickly release.
MAPPING JOYSTICK TO LEFT/RIGHT ANALOG OR D-PAD
- Press a direction on the JOYSTICK and hold.
- While holding a JOYSTICK direction, press and hold the BUTTON for 3 seconds. When the back-lit buttons flash, release the JOYSTICK and the BUTTON to confirm the change.
NOTE: The JOYSTICK default is D-Pad.
FACTORY RESET
To reset lighting, audio, and all button functions to the factory default:
- Press SHARE, , and OPTIONS BUTTONS together and release.
- Upon release, all of the back-lit buttons will flash twice to indicate successful reset.
TOURNAMENT / LOCK-OUT MODE
LOCK-OUT MODE will disable all of the buttons shown below except the BUTTON.
- To activate LOCK-OUT MODE: Press the BUTTON.
- To exit LOCK-OUT MODE: Press the BUTTON.
NOTE:
Regardless of your lighting color, the back-lit buttons shown above will turn
red and blink once every 5 seconds while in LOCK-OUT MODE.
©2021 Victrix. Victrix, Pro FS, and its respective logos are trademarks and/or
registered trademarks of Victrix. All rights reserved. “ ”, “PlayStation”,
“PS4”, and
“PlayStation Shapes Logo” are registered trademarks or trademarks of Sony
Interactive Entertainment Inc. All rights reserved. All other trademarks are
the property of their respective owners. Manufactured and distributed under
license from Sony Interactive
Entertainment LLC.
LIMITED WARRANTY
-
Coverage and Term
Victrix warrants that this product will be free from manufacturing defects for two years from the original date of purchase. Manufacturing defects are those defects in materials and/or workmanship, subject to final determination by Victrix’s customer service department. This warranty applies only to original purchasers with a valid proof of purchase from an authorized Victrix retailer that clearly shows the date of purchase. -
Exclusive Remedy and Exclusions
The exclusive remedy for valid claims will be the repair, replacement or refund of the product. This warranty does not cover defects caused by accidents, improper or abusive use of the product, unauthorized or improper modifications, repairs or handling. -
How to Get Service
Purchasers should contact the Victrix customer service department at 619-339-1769 (US and Canada only) or by visiting VictrixPro.com/support-victrix. Inquiries are typically answered within twenty-four business hours. -
Your Rights Under Applicable Law
This warranty does not affect the legal rights of customers under applicable state, provincial or national laws governing the sale of consumer goods.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>