Apple True Wireless Headphones with Charging Case-Complete Features/Owner’s Guide

Apple True Wireless Headphones with Charging Case

Specifications

• FEATURES : No features description available
• BRAND : Apple
• COLOR : White
• MANUFACTURER PART NUMBER : MV7N2AM/A
• ASSEMBLED PRODUCT DIMENSIONS (L X W X H) : 3.98 x 3.98 x 1.34 Inches

Introduction

The new Air Pods offer a reinvented wireless headphone experience. Simply remove them from the charging case and use them with your iPhone, Apple Watch, iPad, or Mac. Air Pods work like magic after a simple one-tap setup. They’re always switched on and connected. Air Pods can detect whether they’re in your ears and will pause when you remove them. Simply say “Hey Siri” and make your request to adjust the level, change the song, make a call, or even seek directions. When listening to music or podcasts, you can wear one or both Air Pods, and you can play or skip forward with a double-tap.

On a single charge, Air Pods provide 5 hours of listening time1 and 3 hours of conversation time. 2 And, owing to a charging case that carries numerous charges for more than 24 hours of listening time, they’re built to stay up with you. In just 15 minutes, you’ll have 3 hours of listening time4 or 2 hours of talking time in the case. 5 Air Pods use optical sensors and motion accelerometers to determine whether they’re in your ears, thanks to the all- new Apple H1 headphone chip. The H1 chip intelligently channels sounds and engages the microphone whether you’re wearing both Air Pods or just one. An additional speech-detecting accelerometer works with beamforming microphones to filter out external noise and focus on the sound of your voice when you’re on a call or chatting to Siri.

HOW TO CONNECT

Pull down the shade from the top of your Android device and long-press the Bluetooth symbol. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. Select the headphones you want to pair by tapping their name.

HOW TO PROGRAM

Return to the main menu. Open the charging case and place it near to your iPhone while wearing your AirPods. On your iPhone, a setup animation appears. Select Connect.

HOW TO USE

• Press the force sensor on the AirPod’s stem to play and pause audio.
• Double-press the force sensor to advance.
• Triple-press the force sensor to go back in time.

HOW TO PAIR WITH IPHONE

• Go to Settings > Bluetooth on your device and enable Bluetooth.
• Place your device in discovery mode and wait for your accessory to emerge.
• When your accessory name shows onscreen, tap it to pair.

HOW TO SYNC

• To begin, go to Settings…
• Then select Connections.
• Then select Bluetooth…
• Then, in the top-right corner of your screen, tap Scan.
• Then, on your headphones, hit and hold the power button.
• Finally, locate and tap your headphones.

Frequently Asked Questions

• What is the purpose of the button on the AirPod pro case?
  The AirPods can also be paired with non-Apple devices via the small and flush button on the back of the charging case. Put the wireless earphones back in the case and keep the lid open to connect them to a device you haven’t paired them with before.

• How do you respond to calls while wearing AirPods Pro?
  You must tap either the left or right pod.
  This would allow you to answer your phone call.
  To end the call, you must follow the same steps as before.
  To answer a call on your AirPods pro, press the force sensor.

• What does the back button on AirPods do?
  The setup button on the back of your AirPods case is used in specific situations while pairing them with your device.

• Without a phone, how do I increase the volume on my AirPods?
  If you have a pair of second- or third-generation AirPods or AirPods Pro, you can now increase or decrease the volume without tapping or squeezing your earbuds. Simply say, “Hey Siri, increase volume” or “Hey Siri, decrease volume.”

• Without a case, how do I switch on my AirPods?
  To access the control center, swipe down from the top right corner of the screen. Press and hold the audio card in the upper right corner of the control center. Tap the SharePlay icon once it has enlarged. Select your AirPods from the list of Bluetooth devices that have been paired.

• What is the procedure for turning off AirPod noise cancellation?
  On your iOS or iPadOS device, open Control Center. Touch and hold the volume slider while wearing your AirPods Max or both AirPods until you see the additional controls. In the lower-left corner, tap the Noise Control icon. Tap Off, Noise Cancellation, or Transparency.

• Is it possible to use any wireless earbuds with an iPhone?
  All wireless earbud brands are compatible with the iPhone. You can use whatever earbuds you wish as long as they have Bluetooth functionality.

• Why won’t my iPhone recognize Bluetooth devices?
  Make sure your Bluetooth accessory and your iOS or iPadOS device are in close proximity. Turn your Bluetooth accessory off and then back on. Make sure your Bluetooth equipment is turned on and fully charged or plugged in. Check to check whether the batteries in your item need to be replaced.

• What does the AirPods’ orange light mean?
  When the light is solid orange in hue, it means the AirPods are charging. When the AirPods are fully charged, this indicator turns green. When the orange light flashes, it means that the AirPods have experienced an unrecoverable problem, which in most situations is a pairing error.

• What does the flashing red light on AirPods indicate?
  If oly one AirPod is blinking red, it signifies the earbud isn’t correctly linked with the other earbud or the device to which they’re connected. Before repairing your AirPods to your device, you may need to reset them to get the earphones to sync again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>