FENTON 100.260 Shft-Series Tower Set Instruction Manual

: June 5, 2024
: FENTON

Table of Contents

Safety Instruction
BASIC CONNECTIONS
TECHNICAL SPECIFICATION
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FENTON 100.260 Shft-Series Tower Set Instruction Manual

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Safety Instruction

Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220- 240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the life time.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
If this unit have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

BASIC CONNECTIONS

TECHNICAL SPECIFICATION

SHFT60B

Ref. Nr.: 100.260
System: 3-way
Power max: 350W
Power RMS: 180W
PMPO: 500W
Impedance: 8Ohm
Frequency response: 28Hz – 22kHz
Woofer: 6,5”
Tweeter: Neodymium
Dimensions per piece: 250 x 200 x 860mm
Weight per piece: 7.5kg

SHFT650B

Ref. Nr.: 100.262
System: 3-way
Power continue 2x 230W
Impedance: 8Ohm
Frequency response: 32Hz – 20kHz
Woofer: 6,5”
Tweeter: 1”
SPL @ 1W/1m: 89dB ±3dB
Dimensions per piece: 265 x 200 x 1020mm
Weight per piece: 8.85kg

SHFT655B

Ref. Nr.: 100.264
System: 3-way
Power continue 2x 250W
Impedance: 8Ohm
Frequency response: 32Hz – 20kHz
Woofer: 2x 8”+ 6,5”
Tweeter: 1”
SPL @ 1W/1m: 90dB ±3dB
SPL max. 114dB
Dimensions per piece: 268 x 241 x 1100mm
Weight per piece: 13.2kg

SHFT52B

Ref. Nr.: 100.323
System: 3-way
Power max: 500W
Impedance: 8 Ohm
Frequency response: 20Hz – 20kHz
Woofer: 6,5”
Midrange: 2x 3”
Tweeter: 1”
SPL @ 1W/1m 88dB ±3dB
Dimensions per piece: 250 x 120 x 1035mm
Weight per piece: 7.1kg

SHFT57B

Ref. Nr.: 100.325
System: 4-way
Power max: 600W
Impedance: 4Ohm
Frequency response: 20Hz – 20kHz
Woofer: 4x 6,5”
Midrange: 6.5”
Tweeter: 1”
SPL @ 1W*1m 88dB ±3dB
Dimensions per piece: 220 x 325 x 1110mm
Weight per piece: 12.1kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Logo

Declaration of Conformity

Manufacturer: TRONIOS BV
Bedrijvenpark Twente 415
7602 KM – ALMELO
+31(0)546589299
+31(0)546589298
The Netherlands

Product number: 100.260; 100.262; 100.264; 100.323; 100.325

Product Description:

SHFT60B Tower Set 2x 6,5″ Black
SHFT650B Tower Set 3x 6,5 Black
SHFT655B Tower Set 2x 8″, 1x 6,5” Black
SHFT52B Tower Set 6.5” Black
SHFT57B Tower Set 4×6.5” Black

Trade Name: FENTON

Regulatory Requirement:

EN 60065
EN 55013
EN 55020
EN 61000-3-2/-3-3

I hereby declare that the product meets the requirements stated in Directives 2014/35/EU and 2014/30/EU and conforms to the above mentioned Declarations.

Almelo,
12-10-2016

Name: M. Velders
Signature:

Specifications and design are to change without prior notice..
www.tronios.com
Copyright © 2016 by TRONIOS the Netherlands