FENTON AV550BT 5ch Surround Amplifier Instruction Manual
- June 3, 2024
- FENTON
Table of Contents
FENTON AV550BT 5ch Surround Amplifier
Congratulations to the purchase of this Fenton product. Please read this
manual thoroughly prior to using the unit in order to benefit fully from all
features.
Read the manual prior to using the unit. Follow the instructions in order not
to invalidate the warranty. Take all precautions to avoid fire and/or
electrical shock. Repairs must only be carried out by a qualified technician
in order to avoid electrical shock. Keep the manual for future reference.
-
Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
-
The unit contains voltage carrying parts. Therefore, do NOT open the housing.
-
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
-
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
-
The unit is not suitable for continuous use.
-
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
-
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
-
Do not plug or unplug the unit with wet hands.
-
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
-
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
-
To avoid fire and shock hazard, do not expose the unit to rain and moisture.
-
All repairs should be carried out by a qualified technician only.
-
Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
-
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
-
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
-
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
-
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
-
Keep the unit out of the reach of children. Do not leave the unit unattended.
-
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
-
Do not force the controls.
-
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
-
If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
-
If the battery is damaged, please replace with same specifications battery. And dispose the damaged battery environment friendly.
-
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
-
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
-
Keep away from electronic equipment that may cause interference.
-
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
-
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
-
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
-
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
-
Keep the original packing material so that you can transport the unit in safe conditions.
-
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
-
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
-
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F. -
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
-
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure
that all parts are present and have been received in good condition. Notify
the shipper immediately and retain packaging material if any parts appear
damaged from shipping or the package itself shows signs of mishandling. Save
the package and all packaging materials. If the product must be returned, it
is important that the product is returned in the original factory box and
packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after
transportation), do not switch it on immediately. The arising condensation
water might damage your device. Leave the device switched off until it has
reached room temperature.
OPERATION
When all connections to the amplifier are made, turn all rotary controls down
and switch on the power. Turn BASS and TREBLE controls to the 12 o’clock
position (pointing straight up) and turn the MASTER volume control up slightly
for testing.
Ensure a signal is being fed to one of the inputs and gradually increase the
volume level until the output is heard through the speakers. Turn up the
MASTER volume to the required volume level.
Note: The initial test can be done using the built-in USB/SD audio
player.
In addition to MASTER volume controls, there are BASS and TREBLE controls to
adjust the tone of the overall output. At the 12 o’clock position, these
controls are applying no effect to the signal (no boost or cut). Moving the
BASS control clockwise boosts the low frequencies in the audio, whilst moving
it anticlockwise will cut these low frequencies. Likewise, moving the TREBLE
control clockwise boosts the high frequencies in the audio, whilst moving it
anticlockwise will cut these high frequencies. Adjust these EQ controls to
suit the type of audio signal or compensate for the room acoustics.
CONNECTING WITH BT
- Activate the BT-function on your device (mobile phone, tablet etc.) from which you want to play the music. See the operating instructions for that device.
- Activate BT-function.
- Select “AV550BT” on your BT-device and make the BT-connection.
Attention: The BT distance is approx. 10 meters without any barrier.
FRONT PANEL
-
ON/OFF POWER BUTTON
Press to turn the device on/off. -
LED DISPLAY
Displays modes and the current operating status. -
SD / MMC MEMORY CARD SLOT
SD/MMC memory cards can be inserted in this slot. -
USB PORT
An USB storage device can be inserted here. -
BUTTON CLUSTER
-
REPEAT
Switch between single repeat and repeat all. -
PREVIOUS
-
In USB/SD/BT mode: press to select previous track.
-
In FM mode: press to select the previous channel.
-
In FM/BT mode: hold to decrease volume.
-
PLAY/PAUSE
In USB/SD/BT mode: press to change from play to pause or from pause to play. In FM mode: press to scan all frequencies from 87.5MHz to 108MHz. -
NEXT
-
In USB/SD/BT mode: press to select next track.
-
In FM mode: press to select the next channel.
-
In FM/BT mode: hold to increase volume.
-
MODE
Switch modes between USB, SD, FM and BT.
-
-
MASTER VOLUME CONTROL
Turn to adjust the overall system volume, in a range between minimum and maximum level. -
BALANCE
Turn to adjust the balance between the L/R channels. -
BASS
Turn to adjust the low frequencies. -
TREBLE
Turn to adjust the high frequencies. -
LOUDNESS
Press to maximize output volume. -
CENTRE VOLUME CONTROL
Turn to adjust the volume of the centre speaker. -
SURROUND VOLUME CONTROL
Turn to adjust the volume of the surround speaker(s). -
ECHO CONTROL
Turn to adjust the microphone echo level. -
MICROPHONE BASS CONTROL
Turn to adjust the microphone bass level. -
MICROPHONE TREBLE CONTROL
Turn to adjust the microphone treble level. -
MICROPHONE INPUTS
6.3mm microphone input jacks. -
MICROPHONE VOLUME CONTROL
Turn to adjust the microphone channel 1/2 volume.
REAR PANEL
-
AUDIO INPUT
RCA input jacks for connecting CD/DVD-players, etc. -
REC OUTPUT CONNECTOR
Line signal output, kept separately from the device’s master output level. -
SUB OUTPUT
Connect an active subwoofer to these jacks. -
SPEAKER OUTPUT
Speaker terminal to connect main speakers. -
CENTRE SPEAKER OUTPUT
Speaker terminal to connect the centre speaker. -
SURROUND SPEAKER OUTPUT
Press type terminal to connect surround speakers. -
FM ANTENNA CONNECTOR
Connector for external FM antenna.
REMOTE CONTROL
-
ON/OFF POWER BUTTON
Press to turn the device on/off. -
ON/OFF POWER BUTTON
Press to turn the device on/off. -
MUTE
Press to (un)mute the device. -
EQUALIZER
Press to change equalizer modes. -
PLAY/PAUSE
Press to start/resume or pause playback. -
VOLUME +
Press to increase the volume level. -
PREVIOUS
Press to select the previous track or channel. -
NEXT
Press to select the next track or channel. -
SCAN
Press in FM mode to perform an auto scan. -
VOLUME
Press to decrease the volume level. -
NUMPAD
Press to select tracks directly. The unit takes a moment to respond in USB and SD mode. -
REPEAT
Switch between single repeat and repeat all.
TECHNICAL SPECIFICATION
- Playback options B T streaming, FM radio, SD, USB
- Input connections 6.3mm J a ck, RCA, SD, USB
- Output connection RCA
- Speaker connections Clip terminal, screw terminal
- Output power 320W
- Impedance 16Ohm, 8Ohm , 4Ohm
- Power supply 220 240VAC 50Hz
- Dimensions (L x W x H) 2 75 x 430 x 80mm
- Weight : 4 .05kg
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual is conforming European and UK legislation directives to which they are subject
United Kingdom
Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
Specifications and design are subject to change without prior notice. www.tronios.com
Copyright © 2022 by Tronios The Netherlands
References
- Samen zijn we open. Samen staan we sterk. - Stichting Open
- Samen zijn we open. Samen staan we sterk. - Stichting Open
- Sound & Light distributor - Tronios.com
- Homepage - Wecycle
- Homepage - Wecycle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>