JOOVV 1155 Hardwire Pairing Kit User Guide
- June 5, 2024
- JOOVV
Table of Contents
JOOVV 1155 Hardwire Pairing Kit
To pair your Multiple Device Setup using Pairing Cable Kit follow the steps listed below.
Reset All Devices
-
Step 1
After applying power to the device using the main AC power cord, reset device by pressing and holding the Power and Light Mode buttons together for 4 seconds. -
Step 2
Press the Power button twice or until the display reads FOLL. -
Step 3
Press and hold the Power button for 4 seconds to confirm. -
Unplug the power cord and leave the device in this state. The next time the device receives power it will
search for the Lead device. -
Repeat steps 1-3 for each device before continuing.****
Pairing Cable Kit steps for Multiple Device Setup
Assemble Joovv
-
Step 4
Assemble and mount devices then connect AC patch cables, main AC power cord, and hardwire pairing cables following the Wire Diagram section on pages 29-32 of the User Manual.
Set Lead Device -
Step 5
Locate the Lead device control panel (Example Joovv Quad shown). Press and hold the Power and Light Mode buttons for 4 seconds to clear the device mode. -
Step 6
Press the Power button once or until the display reads LEAD. -
Step 7
Press and hold the Power button for 4 seconds to confirm. Devices will automatically pair and the Lead control panel will display the 10:00 minute session timer. The Lead device is now the controllable device for the configuration. -
Great job! You’re now ready to start Joovvin’!
Device Configurations
with pairing cables displayed
-
Joovv Half Max 3.0****
-
Joovv Duo 3.0
-
Joovv Duo 3.0(horizontal)
-
Joovv Max 3.0
The Horizontal Duo configuration is an alternative setup option and requires an additional accessory kit. Please reach out to [email protected] for more information. -
Joovv Quad 3.0****
-
Joovv Elite 3.0
Revision History
Date| Revision #| Description of Changes
December 2020| JV-MKT-DOC-3523 (Ver.0)| Ver.0 Release to market
March 2021| JV-MKT-DOC-3523 (Ver.1)| Ver.1 Updated Page 2 Illustration
April 2021| JV-MKT-DOC-3523 (Ver.2)| Updated text/images