PawHut D08-039V00 Elevated Feeder Installation Guide
- August 17, 2024
- PawHut
Table of Contents
PawHut D08-039V00 Elevated Feeder
Product Information
Specifications
- Model: IN220800228V01_GL
- Version: D08-039V00
- Steps: 12
- Duration: 60 minutes
- Dimensions: A 32, B 32, D 8, C 1, E 2
Product Usage Instructions
Step 1: Assembling the Product
Follow the assembly instructions provided in the manual to put together the
product.
Step 2: Setting Up
Place the product in a suitable location with enough space around it for
operation.
Step 3: Power On
Connect the product to a power source and switch it on using the designated
power button.
Step 4: Operating the Product
Refer to the user manual for detailed instructions on how to use the product
effectively.
FAQ (Frequently Asked Questions)
-
Q: How long is the warranty period for this product?
A: The warranty period for this product is one year from the date of purchase. -
Q: Can this product be used outdoors?
A: This product is designed for indoor use only and should not be used outdoors.
PARTS
HARDWARE
USING CAM LOCK AND QUICKFIT
- QUICK FIT: Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.
- CAM LOCK: When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
- Quickfit head should be in the centre of the cam lock when the two panels are joined. Cam lock should be inserted before quickfit.
- Turn cam lock clockwise to tighten.
PRE-FIX DRAWER RUNNER INSTRUCTIONS
NOTE: Pull inner and outer drawer runners apart before fixing them to panels.
Slide drawer runners apart until the drawer lock can be seen, as shown.
Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.
Your inner and outer drawer runners are ready to be fixed to panels.
INSTALLATION INSTRUCTION
Please find the exact hole for installation, otherwise it will be misaligned. The screws on the drawer slide must be leveled , otherwise it will affect the smoothness of the drawer.
Be careful to push in the board when the both sides slide way been aligned.
US
If you have any questions, please contact our customer care center, Our
contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
UK
If you have any questions, please contact our customer care center, Our
contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>