PROAIM SL-ALPN-01 Alpine Vertical Tower Mitchell Camera Slider User Manual

: June 3, 2024
: PROAIM

Table of Contents

PROAIM SL-ALPN-01 Alpine Vertical Tower Mitchell Camera Slider
What’s In The Box
Alpine Vertical Tower Mitchell Camera Slider Setup
Alpine Tower Mount on Cyrus Pro Mitchell Hi-Hat
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROAIM SL-ALPN-01 Alpine Vertical Tower Mitchell Camera Slider

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below. PROAIM-SL-ALPN-01-Alpine-Vertical-
Tower-Mitchell-Camera-Slider-fig-1 All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Alpine Vertical Tower Mitchell Camera Slider Setup

PROAIM-SL-ALPN-01
-Alpine-Vertical-Tower-Mitchell-Camera-Slider-fig-2

Loosen the bolt using the Allen key to attach the Mitchel plate into the Alpine tower slider and then remove the bolt.
Attach the Mitchell mounting plate on the tower slider plate and then insert the bolt by aligning the thread, as shown in the image.
After inserting the bolt on the Mitchell mount plate, secure the bolt with the help of the Allen key, as shown in the image.

Alpine Tower Mount on Cyrus Pro Mitchell Hi-Hat

PROAIM-SL-ALPN-01
-Alpine-Vertical-Tower-Mitchell-Camera-Slider-fig-5

Mount the Mitchell to Euro adapter (Not Included) to Cyrus pro Mitchell high-hat (Not Included) and then secure it from bottom using the locking knob.
Now the Mitchell to the Euro adapter (Not Included) has properly been secured over the Cyrus pro Mitchell high-hat (Not Included), as shown in the image.
To mount the Alpine Tower Slider over the Euro Adapter (Not Included), loosen all the knobs from bottom and then mount.
After mounting the Alpine Tower Slider, again tighten the knob and properly secure it.
Secure the Properly Alpine tower slider with the ratchet knob. Then attach the bowl plate (Not Included) to the Mitchell plate.
Attach the bowl plate (Not Included) to the Mitchell plate to mount the bowl’s fluid head (Not Included) and then mount the camera on the fluid head, as shown in the image.
Attach the Mitchell’s fluid head (Not Included) to the Mitchell plate.
NOTE: Its rugged design supports any camera/ fluid head combination up to 22.6. Multiple 3/8″-16 threaded holes for mounting accessories.
Secure with the castle nut after mounting the fluid head as shown in the image.
To release the top plate of the fluid head, press the side knob. Then match the camera’s thread to the fluid head (Not Included) and attach top plate of the fluid head to the camera and then slide the camera to the fluid head.
Camera has been properly mounted on the fluid head (Not Included).
NOTE: Alpine tower slider compatible with Mitchell Base to Bowl Adapter & Euro/Elemac Base Adapter.
After matching the alpine tower slider to the mounting thread, insert the weight rod (Dia: 25mm) into it and then properly secure the rod.
You can set setup in steady motion.
NOTE: Alpine Tower Slider is a counterbalanced elevation tower that gives operators 26.7” of smooth vertical movement as well as a complete 360° of rotation.
As per the requirement of the setup, insert the weight to the weight rod.
Now setup is ready to use.
After matching the alpine tower slider’s mounting thread with the weight rod, and then insert the weight rod (Dia: 25mm) into it and then properly secure the rod.
To properly secure the weight on the weight rod, weight closer will be used.
Alpine Tower Slider is designed to work with various camera platforms like Heavy-duty sliders, Doorway Dollies, Tripods, Pipe dollies, Hi-hats, Bazookas, or any other platform with an Elemac mounting base.

YOUR PROAIM ALPINE VERTICAL TOWER MITCHELL CAMERA SLIDER W EURO BASE ALL DRESSED UP AND READY TO GO!

PROAIM-SL-ALPN-01-Alpine-Vertical-Tower-Mitchell-Camera-Slider-
fig-22 Warranty

We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us : In case of any kind of dissatisfaction, please Contact us immediately and we promise our ut-most support and care until you use our product.