SIGMA ROX 4.0 GPS Cycle Computer User Manual

: June 5, 2024
: SIGMA

SIGMA ROX 4.0 GPS Cycle Computer

REMARKS

This manual is a quick guide.You can access the detailed instructions by following this link: goto.sigmasport.com/rox4-0

INSTALLATIONBUTTON FUNCTIONS

HEART RATE SENSOR

HEART RATE SENSOR BATTERY CHANGE

INSTALLATION

SPEED / CADENCE SENSOR FIRST START

SPEED SENSOR / CADENCE SENSOR

BUTTON FUNCTIONS

START/STOP/MENU Button
Start training
Stop training
Confirm input
One menu level down
Switch on the device (press for 3s)
Press and hold the button:
Open and close menu
PLUS Button
One page forward
Increase value
Press and hold the button:
Save and reset training values
MINUS button
One page backward
Decrease value

FIRST START

Press START Button for 5s to Wake-Up.
Choose YES to pair a Smartphone, choose NO to manually set the device.
Download SIGMA RIDE App and follow App instructions to configure your device.
OR set device and user settings manually.
Enjoy your device and start your first ride!

The app offers you many functions for setting up and customising the ROX 4.0. For more information on the app functions, see the „SIGMA RIDE app“ page.

TRAINING

Press START button for 3s to start the device.
Don‘t move and search for clear sky location for fast GPS fix.
Wait for „GPS OK“. Press START button to start the training session.
Press START button to stop the training session.
Hold „+“ button to reset training values and save your training.
Sync with Smartphone for full data analysis and sharing.

MAIN MENU

Hold START button, when training is NOT started.
You have access to the main menu with all the functions of the ROX 4.0.

SHORT CUT MENU

Hold START button, when training is active or in auto pause.
You can edit the most important settings during training.

SETTINGS

Choose Settings in main menu to set the device.
You can edit Device settings and Totals.
Choose a setting you want to edit and press START button to set.
Press „-“ button to decrease a value or to toggle through options.
Press “+” button to increase a value or to toggle through options.
Press START button to confirm the settings
Use the App to set your training views.
Use the App or SIGMA DATA CENTER to update your firmware.

SENSOR CONNECTION

Choose SETTINGS > CONNECT to edit connections.
Choose SENSORS to pair new sensors or manage paired sensors.
Choose „SEARCH NEW“ to add new sensors.
Make sure that sensors are switched on!
Select Sensor with + or – and press START to pair sensor. Repeat, if you want to pair more sensors.

TIP: Some sensors are available in Bluetooth and ANT+ at the same time. We recommend to choose the ANT+ connection.

E-BIKE CONNECTION

Choose Main Menu > Connection > E-Bike to pair a new E-Bike or manage paired Bike.
Make sure that E-Bike is switched on!
Press START button to pair E-Bike.

SIGMA RIDE APP

Set Device and Training Views
Firmware Update
Analyze your training
Share your data and many more…

CHARGING AND DATA TRANSFER

Open USB Cover.
Insert USB-C cable. Check that the cable and port are dry!
Charge with 5V max. 1000mA.
Connect to PC for data transfer.

IMPORTANT : Please ensure that the USB cover is always closed before starting a training session.

TECHNICAL INFORMATION

R O X 4 .0|
---|---
Battery type| Rechargeable 550 mAh, 3.7 V Battery
Operation temperature| 0 °C to 60 °C
Operation frequency| ANT+ 2.4 GHz @ 1 dBm nominal
Bluetooth 2.4 GHz @ 1 dBm nominal
GPS 1575.42 MHz (receiver only)
GLONASS 1602 MHz (receiver only)
Transmission power| <4 dBm
Water and Dust rating| IPX7

Important: You can find the CE declaration at: ce.sigmasport.com/rox40

SIGMA-ELEKTRO GmbH Dr. – Julius- Leber- Straße 15 67433 Neustadt/Weinstraße Germany kundenservice@sigmasport.com

www.sigmasport.com