SIGMA ROX 2.0 GPS Cycle Computer User Manual

: June 5, 2024
: SIGMA

Table of Contents

SIGMA ROX 2.0 GPS Cycle Computer
REMARKS
CONTENTS
INSTALLATION
FIRST START
TRAINING
MENU OVERVIEW
SETTINGS
E-BIKE CONNECTION
SIGMA RIDE APP
CHARGING AND DATA TRANSFER
TECHNICAL INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SIGMA ROX 2.0 GPS Cycle Computer

REMARKS

This manual is a quick guide.You can access the detailed instructions by following this link: goto.sigmasport.com/rox2-0

INSTALLATION

BUTTON FUNCTIONS

START/STOP/MENU Button
Start training
Stop training
Confi rm input
One menu level down
Switch on the device (press for 3s)
PLUS Button
One page forward
Increase value
Press and hold button:
Save and reset training values

FIRST START

Press START Button for 5s to Wake-Up.
Choose YES to pair a Smartphone, choose NO to manually set the device.
Download SIGMA RIDE App and follow App instructions to confi gure your device.
OR set device and user settings manually.
Enjoy your device and start your fi rst ride!

TRAINING

Press START button for 3s to start the device.
Don‘t move and search for clear sky location for fast GPS fix.
Wait for „GPS OK“. Press START button to start the training session.
Press START button to stop the training session.
Hold „+“ button to reset training values and save your training.
Sync with Smartphone for full data analysis and sharing.

MAIN MENU

Hold START button, when training is NOT started.
You have access to the main menu with all the functions of the ROX 2.0.

SHORT CUT MENU

Hold START button, when training is active or in auto pause.
You can edit the most important settings during training.

SETTINGS

Choose Settings in main menu to set the device.
You can edit Device settings and Totals.
Choose a setting you want to edit and press START button to set.
Press “+” button to increase a value or to toggle through options.
Press START button to confirm the settings
Use the App to set your training views.
Use the App or SIGMA DATA CENTER to update your firmware.

E-BIKE CONNECTION

Choose Main Menu > Connection > E-Bike to pair a new E-Bike or manage paired Bike.
Make sure that E-Bike is switched on!
Press START button to pair E-Bike.

SIGMA RIDE APP

Set Device and Training Views
Firmware Update
Analyze your training
Share your data and many more…

CHARGING AND DATA TRANSFER

Open USB Cover.
Insert USB-C cable. Check that the cable and port are dry!
Charge with 5V max. 1000mA.
Connect to PC for data transfer.

IMPORTANT : Please ensure that the USB cover is always closed before starting a training session.

TECHNICAL INFORMATION

R O X 2.0|
---|---
Battery type| Rechargeable 350 mAh, 3.7 V Battery
Operation temperature| 0 °C to 60 °C
Operation frequency| ANT+ 2.4 GHz @ 1 dBm nominal Bluetooth 2.4 GHz @ 1 dBm nominal GPS 1575.42 MHz (receiver only) GLONASS 1602 MHz (receiver only)
Transmission power| <4 dBm
Water and Dust rating| IPX7

Important: You can find the CE declaration at: ce.sigmasport.com/rox20

SIGMA-ELEKTRO GmbH Dr. – Julius- Leber- Straße 15 67433 Neustadt/Weinstraße Germany kundenservice@sigmasport.com

www.sigmasport.com