AL-KO GTE 350 Classic Electric Grass Trimmer Instructions
- June 3, 2024
- AL-KO
Table of Contents
- AL-KO GTE 350 Classic Electric Grass Trimmer
- Instruction
- PRODUCT DESCRIPTION
- PRODUCT OVERVIEW
- SAFETY INSTRUCTIONS
- Electrical safety
- ASSEMBLY
- STARTUP
- OPERATION
- MAINTENANCE AND CARE
- STORAGE
- TROUBLESHOOTING
- WARRANTY
- EC DECLARATION OF CONFORMITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AL-KO GTE 350 Classic Electric Grass Trimmer
Instruction
PRODUCT DESCRIPTION
This documentation describes a hand-operated electrical lawn trimmer.
Technical data
Technical data acc. to the following standards:
Mechanical safety acc. to EN 786, 5.1.1, Annex E and D,
sound pressure and sound energy level acc. to DIN EN ISO 3744:2010
Measurement of mechanical vibration at the hand grip acc. to EN 28662-1:1992
ADVICE The specified values have been established based on a standardised test
process and can be used for comparing different electrical tools with one
another.
In addition, these values are suitable for estimating in advance the loads to
which the user is exposed due to vibration.
ABOUT THIS HANDBOOK
- Read this documentation before starting up the machine. This is a precondition for safe working and flawless operation.
- Observe the safety warnings in this documentation and on the product.
- This documentation is a permanent integral part of the product described and must be passed on to the new owner if the product is sold.
Explanation of symbols
-
CAUTION!
Following these safety warnings care-fully can prevent personal injury and/or material damage. -
ADVICE Special instructions for greater ease of understanding and improved handling.
-
WARNING!
The actual vibration values may differ from those specified, depending on what the electrical tool is used for.
Take measures to protect yourself against vibration loads. In doing so, take account of the entire working process, i.e. also times during which the electrical tool is operating without load, or is switched off.
Suitable measures include regular maintenance and care of the electrical tool and the tool attachments, keeping your hands warm, taking regular breaks and planning the working sequences effectively. -
WARNING! Wear ear defenders to prevent impairment of hearing.
Symbols on the appliance
- Important! Take particular care during handling.
- Read the operating instructions before starting operation!
- Danger due to objects being thrown out!
- Protect the appliance against rain and moisture
- Wear protective glasses and ear defenders.
Adjustable telescopic handle
The lawn trimmer is equipped with an adjustable telescopic handle. This allows
the appliance to be set to individual body sizes, and allows the motor head to
be swivelled.
Swivelling and adjustable cutter head
GTE 450 and 550 have a swivelling cutter head with an adjustable angle.
Automatic tip
An automatic tip function is equipped in the spool head, allowing the cutting
line to be extended while the motor is running.
Safety and protective equipment
Child protection
The hole (5 mm) on the motor protection switch is provided for a padlock*. The
padlock prevents the appliance from being switched on inadvertently.
- Not included in the scope of delivery
Motor protection switch
The lawn trimmer is equipped with a motor protec-tion switch which deactivates
in case of an over-load.
The lawn trimmer can be switched back on again after a cooling-down phase of
approx. 15 minutes.
CAUTION!
Risk of injury!
Safety and protective devices should not be disabled.
Designated use
This appliance is intended for trimming a lawn in non-commercial applications.
Any use not in ac-cordance with this designated use shall be regar-ded as
misuse.
- This tool is not intended to be used by people (including children) who have restricted physical, sensory or mental capabilities; neither is it intended to be used by people lacking experience and/or knowledge unless they are supervised by someone who is responsible for safety, or receive instructions from this supervisory person in how to operate the tool. Children should be supervised in order to make sure that they do not play with the tool.
CAUTION!
The equipment is intended for domestic use only.
PRODUCT OVERVIEW
Product overview
The product overview (1) provides an overview of the appliance.
- Upper hand grip
- Switch with child protection
- Appliance plug
- Cable strain relief
- Auxiliary hand grip
- Holder with additional spool *
- Telescopic handle
- Upper guide sleeve
- Lower guide sleeve
- Locking button for cutter head *
- Cutter head with motor
- Plant protection bar
- Guide wheel *
SAFETY INSTRUCTIONS
CAUTION!
The cutting tools continue to rotate even after the motor has been switched
off.
- Before using mains and extension cables, check them for any signs of damage or ageing.
- Keep extension cables away from the cutting tools.
- If the cable becomes damaged during use, immediately disconnect from the mains. DO NOT TOUCH THE CABLE UNTIL IT HAS BEEN
- DISCONNECTED FROM THE MAINS.
- Wear suitable clothing, eye protection and gloves
- Never allow children or uninstructed persons to operate or maintain the machine. Local regulations may specify the minimum age of people operating the machine
- Stop using the machine when people, especially children (and also pets) are in the vicinity.
- Only mow during daylight hours or with good artificial lighting.
- Before taking the machine into operation, and following any impact, check the machine for signs of wear or damage and undertake the necessary repairs.
- Never use the appliance if any protective de-vices are damaged or missing.
- Always keep hand and feet away from the cutting device, above all when switching on the motor.
- Any device that is used for cutting off the line represents a danger of injury.
- After pulling out a new line, always hold the machine in its normal working position before switching it on.
- Never fit metallic cutting elements.
- Only use genuine spare parts and genuine accessories.
- Disconnect the mains plug before carrying out any checks, cleaning or work on the ma-chine, and when it is not in use.
- Make sure that air openings are free from contamination.
- In spite of technical and additional protective measures, there is always a residual risk when working with the machine.
- Keep the handles dry and clean.
- Remove foreign objects from the working area.
- The equipment should be used only if in good order and condition
- Always keep the guard, string head and engine free of mowing debris.
- Keep body and clothing away from cutting parts.
- Persons who are not familiar with the trimmer should practise handling it with the engine switched off.
- Wear appropriate working clothes.
- Always ensure stability when working.
- Always operate the appliance with two hands.
- Keep others away from dangerous areas.
- Do not leave the appliance unsupervised.
- When mowing on sloping ground, always stand downhill of the cutting device.
- If working on slopes:
- Never work on a smooth and slippery slope.
- Always make sure you are positioned securely.
- Always work across the slope, never up-ward or downward.
- Do not work on slopes with a more than 10° gradient!
- Take particular care when turning! After contact with a foreign object:
- The machine must not be operated if the operator is under the influence of alcohol, drugs or medication.
- Comply with the accident prevention regulations.
Electrical safety
CAUTION!
Danger when touching voltage con-ducting parts!
Disconnect the plug from the mains if the extension cable is damaged or
severed! We recommend connecting a RCD (residual current operated device)
having a nominal residual current of < 30 mA.
- The house mains voltage must agree with the details quoted in the technical data, do not use any other supply voltage.
- Use only extension cables that are suitable for use outdoors – minimum cross-section 1.5 mm2. Cable drums should always be un-rolled completely.
- Damaged or brittle extension cables must not be used.
- Check the condition of your extension cable each time you start to use the equipment.
- Secure the extension cable in the cable strain relief.
- Do not get the appliance wet or expose it to moisture.
- Keep children away from appliances connected to the mains.
ASSEMBLY
CAUTION!
The machine must not be put in operation before it has been assembled
completely.
Install the guard plate
ADVICE The knife integrated in the guard plate automatically cuts the line
to the opti-mum length.
GTE 350
- Set the guard plate in relation to the cutter head (2-1).
- Make sure that the line is exposed.
- Secure with the enclosed 4 screws.
GTE 450, GTE 550
- Set the guard plate in relation to the cutter head (2-1).
- Make sure that the line is exposed.
- Screw the guard plate on at the rear with the supplied screws (2-1).
- Place the guide wheel on the guard hood and tighten the screws (2.2).
Installation of auxiliary handle GTE 350
- Pull the grip bar of the auxiliary handle slightly apart (3-1).
- Push the auxiliary handle onto the holder (3-2).
- Engage the auxiliary handle in the splines.
- Put on the pin holder and screw the clamping pin tight (3-3).
GTE 450, GTE 550
The angle of the handle can be individually adjus-ted using the tip lever.
- Push the holder onto the shaft.
- Pull the grip bar of the auxiliary handle slightly apart (3-1).
- Push the auxiliary handle onto the holder (3-2).
- Engage the auxiliary handle in the splines.
- Place the tip lever with pin holder onto the clamping pin.
- Screw the clamping pin tight so that the tip lever can be operated with little force (3-3).
STARTUP
CAUTION!
Always perform a visual check prior to start-up.
Adjusting the telescopic handle
- To release, turn the upper locking sleeve through about 180° to the right (4-1).
- Set the telescopic handle to the individual physique. The telescopic handle can be ex-tended by approx. 10 cm (4-2).
- Tighten the locking sleeve (4-3).
Swivelling the cutter head
To trim lawn edges, for example, it is possible to swivel the cutter head
through 180° (5, 6).
- Loosen the lower locking sleeve (5-1).
- Turn the telescopic handle through 180° (5-2).
- Screw the locking sleeve tight (5-3, 6-1).
Angling the cutter head
By changing the pivot angle, it is also possible to trim areas that are
difficult to access, e.g. under benches, overhangs, etc.
- Press the locking button (7-1).
- Engage the cutter head in the required angle (7-2).
- Release the locking button.
ADVICERemove the guard on the line cutter be-fore taking into operation for the first time.
Starting the lawn trimmer
- Guide the extension cable through the strain relief.
- Connect the extension cable to the mains supply.
- Stand securely.
- Hold the appliance with both hands. Do not place the cutter head on the ground when do-ing this.
- Hold the auxiliary handle in one hand and the upper grip with your other hand.
- Press the switch in the upper grip and hold it pressed. The appliance runs.
- Let the lawn trimmer run at idling speed for a few moments. This causes the cutting line to be cut off to the correct length.
- The appliance switches off when the switch is released.
ADVICEAfter the appliance has been switched off, the spool head continues to rotate for a few seconds.
OPERATION
- Switch on the appliance before approaching the grass to be cut.
- Angle the appliance forwards slightly, and walk forwards slowly (9).
- Sweep the appliance to the right and left in order to cut the grass (9).
Long grass must be cut in several passes. Always proceed from top (10-1, 10-2)
to bottom.
ADVICETap the spool head on the ground from time to time when working. The
automa-tic tip function always keeps the line at optimum length.
- Use the plant protection car in order to hold the appliance at the correct distance from obstacles (11-1).
- Make sure the motor is stopped before you remove any cuttings.
CAUTION!
The vibration value during use of the electrical implement may differ from the
indicated value, depending on what the appliance is used for.
Do not overload the appliance during work.
MAINTENANCE AND CARE
CAUTION!
Danger from electrical current!
Before all maintenance and care jobs, disconnect the appliance from the mains
and secure it to prevent it from being switched back on.
- After use, disconnect the mains plug and check the machine for damage.
- Keep the appliance out of reach of children and unauthorised persons.
- Electrical malfunctions are only allowed to be rectified by authorized specialist workshops.
- Never use the appliance if the blade of the line cutter is missing or damaged.
- Always keep the guard, string head and engine free of mowing debris.
- Do not spray the machine with water! Pentrating water (ignition system, carburettor…) can lead to malfunctions.
- Do not get the appliance wet or expose it to moisture.
- Regularly check the appliance is in good working order.
- Do not use any cleaning agents or solvents. They can cause irreparable damage to the appliance.
Changing the spool
(Replacement spool GTE art. no. 112966)
- Press the two locking catches to open the cover (8-1).
- Remove the empty spool (8-2).
- Insert the new spool.
- Make sure that the spring is re-inserted (8-3).
- Guide the line outwards on both sides.
- Put on the cover and engage the locking caTches.
STORAGE
Clean the appliance and its accessories after each use.
ADVICEHang up the lawn trimmer by its handle. This avoids placing unnecessary
load on the cutter head.
Store the appliance in a dry place protected against frost.
DISPOSAL
Do not dispose of worn-out machines or spent batteries (including recharge-
able batteries) in domestic waste!The packaging, machine and accessories are
made from recyclable materials and must be disposed of accordingly.
TROUBLESHOOTING
Malfunction | Possible cause | Solution |
---|---|---|
Motor does not run | Motor protection switch has swit- ched off |
No mains voltage
| Wait until the motor protection switch switches the trimmer back on.
Check the fuses / RCCB, have the electrical power supply checked by an electricianCheck the extension cable, use a new one if necessary
Trimmer vibrates| Spool is contaminated| Clean the spool, renew it if ne-
cessary
Lawn is not cut well| Spool is empty| Change the spool
Line not long enough| Set the line length
ADVICEIf you encounter any malfunctions that are not listed in this table or which you cannot rectify yourself, please contact our responsible customer service.
WARRANTY
We will address claims for any defects in materials and workmanship during the statutory period of limi-tation by means of repairs or replacements of our choice. The period of limitation is governed by the laws of the country in which the machine was purchased.
- Our warranty applies only if:
- The machine has been properly handled
- The operating instructions have been adhered to
- Original replacement parts have been used
- The warranty is no longer in effect if:
- Efforts have been made to repair the machine
- Technical modifications have been made to the machine
- The machine has not been used for its intended purpose
- The warranty does not cover:
- Damage to paint work through normal use
- Parts subject to wear as indicated in the replacement parts list with a box [xxx xxx (x)]
- Internal combustion engines – separate warranty conditions of the respective engine manufacturer apply
The warranty period begins with the purchase by the first buyer. The warranty period begins on the date that appears on the original purchase receipt. In the event of a warranty claim, please your contact sup-plier or the nearest authorised customer service centre with this warranty declaration and the purchase receipt in hand. This warranty does not affect the legal warranty claims by the purchaser against the seller.
EC DECLARATION OF CONFORMITY
We hereby declare that this product in the version which we have introduced into circulation is in accordance with the requirements of the harmonised EU directives, EU safety standards and the product-specific standards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>