PHILIPS ADD5980M All-In-One Water Dispenser User Guide
- June 5, 2024
- Philips
Table of Contents
- PHILIPS ADD5980M All-In-One Water Dispenser
- First time cleaning
- User interface
- The lifetime of the filter cartridge
- How to fill the internal water tank?
- **How to dispense water ?
- **How to switch off the cooling system?
- **How to reset the filter lifetime indicator?
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PHILIPS ADD5980M All-In-One Water Dispenser
First time cleaning
Dispense water till the water tank is empty.
User interface
-
On/Off Button
Press to activate the appliance. Long press for 3 seconds to deactivate the appliance. -
Safety Lock
When chosen, press to unlock before pressing the dispense button. Press to hot lock water the 40’C appliance. is -
Dispense Button
to start or stop dispensing. Long press for 3 seconds to continuously dispense lL of Press water. -
Descale Indicator/Button
Lights During up descaling, when it is press time to Dispense descale. Button Long to press pause, for 3 and seconds press to Descale start the or descaling Dispense Button process to restart. -
Cooling Indicator
Lights up when the water is being cooled and turns off when the cooling is done.
The lifetime of the filter cartridge
Filter lifetime indicator flashes: the filter is about to reach the end of life. Filter lifetime indicator lights up constantly: the filter reaches the end of life.
Filter Lifetime Reset
Long press both buttons for 3 seconds to reset the filter lifetime.
How to switch the appliance on/off?
- Press the On/Off button to activate the appliance.
- Long press the On/Off button for 3 seconds to deactivate the appliance.
How to fill the internal water tank?
- Press the Water Temperature Selection button until “Cold” is selected.
- Press the Dispense button for 3 seconds to continuously dispense ll of water.
**How to dispense water ?
**
- When hot water >40’t: is chosen, press the Safety Lock button to unlock.
- Press the Dispense button to start or stop dispensing.
**How to switch off the cooling system?
**
- Long press both buttons ◄\?) t:1m, for 3 seconds to turn off/turn on the cooling system.
- With the cooling system off, and the temperature on setting “cold”, the appliance will dispense water of ambient temperature, in stead of chilled water.
**How to reset the filter lifetime indicator?
**
- Long press both buttons ◄l2) \d for 3 seconds to reset the filter lifetime.
Register your product and learn more in the website link below:
www.philips.com/water
Specifications are subject to change without notice © 2021 AquaShield All
rights reserved. The Philips trademark and the Philips Shield Emblem have
registered trademarks of Koninklijke Philips NV used under license This
product has been manufactured by and is sold under the responsibility of Hong
Kong AquaShield Health Technology Company Limited and Hong Kong AquaShield
Health Technology Company Limited is the warrantor in relation to this
product. Rev A APR 21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>