Anker 3-in-1 Cube with MagSafe Y1811 User Manual
- June 13, 2024
- Anker
Table of Contents
Anker 3-in-1 Cube with MagSafe Y1811
USER MANUAL
QUICK START
Specifications
Adapter
Input | 100-240V~50/60HZ 1.0A |
---|---|
Output | 5.0V 3.0A / 9.0V 3.0A / 12.0V 2.5A / ; |
15.0V 2.0A / 20.0V 1.5A
Average Active Efficiency| 85.67%
Efficiency at Low Load (10%)| 84.17%
No-Load Power Consumption| 0.04W
Wireless Charger
Input | 12.0V 2.5A / 15.0V 2.0A / 20.0V 1.5A |
---|---|
Output | Wireless: |
5W/7.5W/15W(for iPhone)
5W Max (for Apple Watch)
5W Max(for AirPods)
Operating Temperature| 0°C – 40°C
Radiated H-Field| EU / UK Only:
-20.70dBuA/m@10m (for iPhone)
-25.60dBuA/m@10m (for Apple Watch)
-14.18dBuA/m @10m (for AirPods)
TX/RX Frequency Range| EU / UK Only:
For iPhone: 359.20-361.60kHz
For Apple Watch: 324.80-327.20kHz
For AirPods: 139.20-141.60KHz
LED indicator Status | Status |
---|---|
Solid white light up for 3s | Connected to power |
Solid whilte | Charging (Airpods only) |
Solid orange | Metal object detected while charging |
WARNINGS:
- This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
- Connect the wireless charger to a Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
- Wireless charging products make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body.
Product Name: Anker 3-in-1 Cube with MagSafe
Model: Y1811
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone:
+1 800 988 7973
IC Warning Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body.
UK / CA
This product complies with the radio interference requirements of the European Community.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type Y1811 is in
compliance with Radio Equipment Regulations 2017 and The Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is
available at the following internet address:
https://www.anker.com/
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and
the product.
CE
EU Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type Y1811 is in
compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.anker.com/
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany
Anker Technology (UK) Limited,
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
- Indoor use only
- This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
For FAQs and more information, please visit:
anker.com/support
DOWNLOAD
Anker 3-in-1 Cube with MagSafe Y1811 User Manual – [Download PDF]
Anker 3-in-1 Cube with MagSafe Y1811 QSG – [Download PDF]