Born A3 LED Light Pad with Stand Instruction Manual
- June 5, 2024
- Born
Table of Contents
Born A3 LED Light Pad with Stand
Package Contents
LED light pad, USB cable, Clip stand.
User Instructions
-
Place the light pad on a dry, flat surface and carefully remove
-
Connect to power supply via USB cable included. gradually light up.
-
To turn on – Touch the switch gently and the working panel will light level. Release your finger at the desired brightness and this will
-
To adjust – Hold down the switch until you achieve your desired set an automatic memory of brightness level. turn off gradually.
Note: Turn on again – Touch the switch, you will go back to the last memory of brightness level. Hold down the switch, it can reach the maximum. Release your finger, then hold down the switch you can dim the light. -
To turn off – Touch the switch again and the lighted area should or portrait. The clip stand can also be used as a pen holder.
-
Slide on/slide off clip stand at the top, for working in either landscape
-
Store the unit in a dust free and dry environment.
-
Flip open centre top section to create the stand.
BOLEDLPA3 Specifications
- Dimension(HxWxD) 345x470x5mm
- Illuminated Area 300x420mm
- Rated Input DC5V 2A
- Working Current 1.62A
- Rated Power 8.1W
- Surface Acrylic
- Light Source LED
- Luminance 398Lumens (+/- 10%)
- Scale Size 42x30cm
- Net Weight 0.939kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>