setty GB-400 Wireless Bluetooth Speaker User Manual
- June 5, 2024
- setty
Table of Contents
setty GB-400 Wireless Bluetooth Speaker
OVERVIEW
Thank you for purchasing Setty GB-400 Bluetooth speaker. Please read the manual carefully before using the product to learn more about the functions and operation way. Do not modify or repair the device on your own. Doing so may result in electric shock, other injuries, complete breakdown of the device or loosing warranty. We hope that you will enjoy the product by Setty.
Importer’s data
- TelForceOne S.A.
- ul. Krakowska119
- 50-428 Wrocław
- Polska
- Designed in Poland
- Produced in PRC
SPECIFICATION
- Rated Power: 3 W
- Battery Capacity: 1200 mAh
- Bluetooth version: 5.0
- Inputs: micro USB, USB, AUX 3,5 mm
- Micro SD card support: yes
- FM radio: yes
- Input voltage: 5 V⎓
- Working time: up to 6 hours EN
- Signal to noise ratio (SNR): ≥65 dB
- Frequency response: 150 Hz – 20 KHz
- Working range: ≥ 10 m
- Transmission frequency Maximum radiated power 2402-2480MHz -1,1dBm(EIRP)
APPEARANCE
- ON/OFF + MODE switch
- Play/Pause
- Volume down/Previous
- Volume up/Next
- AUX
- SD card slot
- USB slot
- Micro USB input
FM radio mode:
Turn on the device and press (1) button to switch the speaker to FM mode.
Connect the charging line to the antenna. Press and hold (2) button to
automatically search and save a radio station and (3) and (4) buttons to
convert.
TWS pair box
Turn on both speakers, while in the matching state press and hold the (1)
button, after you hear a prompt signal release the button and wait for the
automatic matching to complete.
Charging mode
Connect the charging wire, when the red light will be on it is charging.
Charging is finished when the light goes off.
Warnings:
- Keep the speaker away from moisture and heat.
- Long-term listening to loud music may lead to hearing impairment and health problems.
- When listening to a musing and driving, pay special attention to the surroundings.
TelForceOne S.A. declares that the product is compatible with requirements and other relevant provisions of the 2014/53/UE directive. You can download the declaration of product on the website https://manual.setty.pl
Markings
Electrical and electronic devices may not be disposed of with domestic waste. By recycling, reusing the materials, or other forms of utilising old devices, you are making an important contribution to protect our environment. Correct disposal of used batteries According the EU Directive 2006/66/EC with changes contained in EU Directive 2013/56/ UE on the disposal of batteries, this product is marked with crossed-out garbage bin symbol. The symbol indicates that the batteries used in this product should not be disposed with regular household waste, but treated according to the legal directives and local regulations. It is not allowed to dispose of batteries and accumulators must use the available collection points of these items, to be returned, recycled and disposed of. Within the EU, the collection and recycling of batteries and accumulators is a subject to separate procedures. To learn and accumulators please contact your local office or an institution for waste disposal or landfill. Giving this type of waste in the right places will help to conserve natural resources The device and accessories are in line with the directives on operational safety, health and environmental protection referred to in the declaration of conformity. It is compatible with the provisions of the New Approach Directives. Separate collection of used products and packing allows materials to be recycled and used again.