setty GSM106291 TWS Bluetooth Earphones User Manual

: June 12, 2024
: setty

Table of Contents

setty GSM106291 TWS Bluetooth Earphones
INTRODUCTION
OVERVIEW
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

setty GSM106291 TWS Bluetooth Earphones

INTRODUCTION

Thank you for purchasing a product by Setty. Before use, please refer to the User’s manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. The device should not be exposed directly to water, moisture, sunlight, fire or other heat sources. We hope that the product by Setty fulfills your expectations.

OVERVIEW

Charging case
Multifunctional button
LED indicator
Speaker
Microphone
Micro-USB charging port

Specification

Bluetooth version: v 5.0
Bluetooth range: 10 m
Battery capacity (earphones): 30 mAh
Battery capacity (case): 300 mAh
Charging time: around 2 hours
Calls/music playing time: up to 4 hours
Standby time: up to 6 hours

Pairing

Open the charging case (1) and pull the earphones out.
Press the multifunctional buttons (2) on the earphones. Blue LEDs (3) will turn on.
Activate Bluetooth in your device (e.g. phone) and select “Setty” from the list of available devices. The devices will pair up and you will hear the word “connected.” Flashing LEDs (3) in the earphones will turn off. Now, you can enjoy the music played in your earphones!
Putting the earphones into the charging case will cause them to automatical- ly disconnect from the device.
TWS earphones may be connected with a phone as a pair or work independently of each other.
TWS earphones will automatically turn off after 5 minutes if they are not paired with any device.

Turning the earphones off
In order to turn the earphones off without putting them into the case hold the multifunctional buttons (2) for 5 seconds.

Playing music
Make sure that the devices are paired. Then, start playing music on the device. To pause playing, press shortly the multifunctional button (2) on any earphone. To resume playing, press it again. Quick triple-press the multifunctional button (2) on the left earphone to skip to the next track. Quick triple-press the multifunctional button (2) on the right earphone to rewind the track to the beginning, and if you quickly triple-press the multifunctional button (2) on the left earphone again, the device will skip to the previous track. When the earphones play music, you may call Siri by pressing and holding the multifunctional button (2) on the earphone for 3 seconds (function only for the devices with iOS).

Volume control
Earphones have a volume control possibility- independent of the connected device. Quickly press the multifunctional button on the left earphone twice to turn the volume up. Quickly press the multifunctional button on the right earphone twice to turn the volume down.

Making calls
Make sure that the devices are paired. If the earphones are paired with the device, you can make a call by dialing a number on the device. In case of incoming calls, you will hear the number of the calling person in the earphones. You may answer a call by quickly pressing the multifunctional button (2) on one of the earphones. To reject a call, press the multifunctional button (2) on one of the earphones for 2 seconds.

Low battery signalizing and charging
When the battery is low, the earphones start to emit a sound to remind us about the necessity to charge them. To charge the earphones, place them in the case. The red LED indicating the battery state will automatically turn off when the earphones are fully charged. The case may charge the earphones up to 4 times. When the case charges the earphones, the red LEDs on the earphones turn on.

Warnings

Keep them away from moisture and heat.
To avoid damage, keep them away from WIFI routers or other devices that use high frequencies.
It is recommended to use the earphones at a distance of up to 10 meters from the device in order to avoid breaking the signal.
The device may be paired with, for example, a phone, a PC, or a tablet, if such a device has Bluetooth connectivity.
Long-term listening to loud music may lead to hearing impairment and health problems.
When listening to a musing and driving, pay special attention to the surroundings.

TelForceOne S.A. declares that the product is compatible with the requirements and other relevant provisions of the 2014/53/UE directive. You can download the declaration of product on the website https://sklep.telforceone.pl/en- gb/.

Electrical and electronic devices may not be disposed of with domestic waste. By recycling, reusing materials, or other forms of utilizing old devices, you are making – an important contribution to protecting our environment.