AKG Pro WMS40MINI Wireless Microphone System Instruction Guide

AKG Pro WMS40MINI Wireless Microphone System

Specifications

• BRAND: AKG Pro Audio
• MODEL NAME: WMS40MINI Vocal Set BD US25C
• CONNECTIVITY TECHNOLOGY: Wireless
• COMPATIBLE DEVICES: Radio, Amplifier, Karaoke System, Speaker
• COLOR: Black
• INCLUDED COMPONENTS: battery
• BATTERY LIFE: 30 hours
• POLAR PATTERN: Unidirectional
• MICROPHONE FORM FACTOR: Microphone System
• ITEM DIMENSIONS LXWXH: 31 x 9.36 x 2.34 inches
• POWER SOURCE: Battery Powered
• ITEM WEIGHT: 44 pounds

Introduction

A true plug-and-play wireless solution offering crystal clear audio sound is the WMS40 tiny single vocal set. For optimum gain before feedback, the bundled HT40 small handheld transmitter has a dynamic cardioid capsule. The device’s extraordinarily long battery life—30 hours on a single AA battery—saves money when used regularly. The receiver has a 1/4″ Jack output and is housed in a remarkably small enclosure.

HOW TO IMPROVE WIRELESS MIC SIGNALS

• To cut down on noise, move your microphone closer to the receiver.
• addressing the channel switching problem.
• The “power off” concerns are simple to fix.
• Don’t interfere with the signal.
• Use the appropriate antenna and location.
• Make sure your battery is managed properly.
• Decide on a proper gain.

HOW TO STOP WIRELESS MICROPHONE INTERFERENCE

Make sure the microphone is at a low volume and is set far from your amplifier and speakers to prevent microphone interference. Beginner DJs and performers frequently have this problem with their wireless microphones.

HOW TO CONNECT TO TV

Bluetooth is the ideal method for syncing your smart TV and microphone. Simply activate your microphone’s bluetooth discovery. After that, activate Bluetooth on your TV and look for devices there. After your microphone appears, you may select “pair device” to pair the device.

HOW TO CONNECT TO SPEAKER

We must first determine the speaker input connector before using the appropriate cable adapters to connect the microphone’s output signal to the speaker input. Keep in mind that a mic level signal is much too faint to drive a loudspeaker without amplification.

HOW TO CONNECT TO THE RECEIVER

Your AV receiver’s “mic in” input should be used to connect the microphone. This input needs to be labelled explicitly, just like all the others, usually with the letter “mic.” Restart your machine, and if everything appears to be connected in and in order, try speaking into the microphone.

HOW TO CONNECT TO SOUNDBAR

• Remove the soundbar’s connection to the audio source.
• Connect a karaoke mixer to the television.
• Connect your soundbar to the karaoke mixer.
• To the karaoke mixer, connect the microphone(s).
• Start and run a test.

FAQs

does it have selectable channel****

No it comes with a default channel already and you can’t change the channel.

What the frequency that the microphone Works at. I Will use in Brazil****

The mic frequency will automatically adjust itself. No need to look for the right frequency.

I need to buy 5. Can they all be different frequencies?****

I believe so. I have 2 operating without problem at the same location. I do not recall a frequency adjustment so it must be automatic. There may be an upper count limit.

Can three single wms40 mini vocal set be operate at the same time without conflicts frequency or channel?****

As long as they are all different ABCD bands of this model. I have three for my wedding DJ setup and I run ABC bands with absolutely no interference. Have been doing this for about 3 years now. No dropouts up to about 100 feet line of sight and no failures yet. I even have to AKG’s from 20 years ago I use as well if needed for lavalier applications that still work perfectly.

What is the Polar Pattern for this microphone?****

Either you use RCA or Jack input.

can I use it on my Partybox 100?****

Yeah! You’ll need a 1/4″ male end on both ends of your cable.

Will this work with US 45 B receiver?****

From my understanding it is the ABCD bands that you have to worry about but that is for this model of mic. As for the 45 vs 25 I do not know.

What is the Frequency ?****

Look at the description before you buy.. It’s listed – There are options.

What is suggested for the proper microphone clip/holder to attach to microphone stand?****

Any standard mic holder can hold the wireless mic.

So this microphone will work in the 600 few range****

It’s a great Speech Mic / Karaoke Mic and I’ve had very small amount of interference.. But that was probably me to be honest.. The MHz range is great for my region (West US).

What are the dimensions of the receiver? Thanks!****

5-1/8″ deep, 5-1/4″ wide, 1-11/16″ high. For the depth, I’m only counting the receiver body; the volume button and antenna protrude another 3/8″ (total 5-1/2″ depth).

Why are there different frequencies? how do you know which one to get? I’ve never owned a cordless mic before.****

Try to test your mic with different frequencies and that’s it.

Is output Line level or Mic level?****

Mic Level.

What frequency is this?****

864.375Mhz as per the AKG website.

Why are there a, b, c, & d options to choose from?****

I believe it’s for different frequencies. So you don’t get 2 of the same groups.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>