acer BC270U BC0 Series Professional LCD Monitor User Guide
- June 5, 2024
- Acer
Table of Contents
acer BC270U BC0 Series Professional LCD Monitor
Important safety instructions
Please read the following instructions carefully.
- Cleaning the LCD display screen: first, ensure that the power adapter you are using matches electrical standards for your region.
- Turn off the LCD monitor and unplug the power adapter.
- Spray a solvent-free cleaning solution onto your rag and gently wipe the screen.
- Never spill any liquid directly onto or into the screen or its case.
- Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case.
- Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
- Do not place the LCD display near a window. Exposure to rain, moisture, or direct sunlight can cause serious damage to the device.
- Do not press on the LCD screen. Excessively forceful pressing can cause permanent damage to the display.
- Do not remove the case or attempt to repair the machine by yourself. All maintenance tasks should be performed by an authorized technician.
- Store the LCD display in a room with a temperature between -20°C – 60°C (-4°F – 140°F). Permanent damage may result if the LCD display is stored outside of this range.
- Unplug the monitor’s power adapter immediately and contact an authorized technician if:
- The signal cable between the monitor and the computer is worn or damaged.
- Liquid spills onto the LCD display or the display is exposed to rain.
- The LCD monitor or case is damaged.
Attaching the monitor base
- Unpack the monitor base and place the base on a smooth work surface.
- Unpack the monitor.
- Attach the monitor stand arm to the base.
- Make sure the base snaps into the monitor stand arm. (Selected models only)
- Use a screwdriver to turn the black screw to secure the arm to the display. (Selected models only)
Connect the monitor to your computer
- Turn off your computer and unplug the power cord.
- 2-1 Connect Video Cable
- a. Make sure both the monitor and computer are powered-OFF.
- b. Connect the VGA cable to the computer. (Optional)
- 2- 2 Connect HDMI Cable (Only HDMI-input model) (Optional)
- a. Make sure both the monitor and computer are powered-OFF.
- b. Connect the HDMI cable to the computer.
- 2- 3 Connect DP Cable (Only DP-input model) (Optional)
- a. Make sure both the monitor and computer are powered-OFF.
- b. Connect the DP cable to the computer.
- Connect the Audio cable (only Audio input model) (optional)
- Insert the monitor power cable into the power port at the back of the monitor.
- Plug the power cords of your computer and your monitor into a near by electrical outlet.
- Select Power-off USB charge ON/OFF to enable/disable the Power-off USB charge function. (Optional)
~| Note: The location and names of the sockets on the monitor may vary
according to the monitor model, and some sockets may not available for some
models.
---|---
HDMI (optional)| (optional)
VGA IN (optional)| USB (optional)
AUDIO IN (optional)| DP (optional)
AUDIO OUT (optional)| Type (optional)
External control
| No. | Item | Description |
|---|
1
|
Power button/indicator
| Turns the monitor on/off. Blue indicates power on. Amber indicates standby/
power-saving mode.
2| Hotkey 1, 2 buttons| Press to activate the user-defined hotkey function.
3| Input button| Press to toggle input sources.
4
|
Navi/OK button
| Press to activate the OSD menu, then use it as a directional key to highlight the desired function. Press it again to enter a selection.
FCC statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is installed in a residential area. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in
accordance with instructions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a specific
installation. If the device does cause interference to radio or television
reception (which can be determined by the switchgear), it is recommended that
the user take one or more of the following measures to eliminate the
interference:
- Readjust the direction or position of the receiver antenna.
- Increase the distance between the device and the receiver.
- Connect the device power to a power outlet that is different from the circuit to which the receiver is connected.
- Contact your retailer or an experienced radio/TV technician for help.
Note
To prevent damage to the monitor, do not lift the monitor using the stand.
Note: shielded cable
All connections to other computing devices must be through shielded cables to
comply with EMC regulations.
Note: peripherals
Only certified peripherals (input/output devices, terminals, printers, etc.)
that meet Class B limits should be connected to the device. Using uncertified
peripherals may cause interference to radio and television reception.
Note
Any changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate this product.
Operating conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must be able to accept any interference received, including interference that may cause undesired operation.
Note: Canadian users
This Class B digital device complies with Canadian ICES-003 specifications.
Explanatory note on “Regulations on the Management of Waste Electrical and
Electronic
Products Recycling and Disposal”
To better care for and protect our planet, when the user no longer needs this
product or the product end of life, please comply with national laws and
regulations on the recycling of electrical and electronic product waste, and
recycle it through local manufacturers with nationally recognized recycling
qualifications. Abandonment of waste equipment for EU household users
This symbol on the product or on its packaging indicates that the product must not be disposed of with other household waste. When disposing of used devices, it is your responsibility to bring it to a collection point that recycles used electrical and electronic equipment. The separate collection and recycling of used devices at the time of disposal helps to conserve natural resources and ensures that they are recycled in a manner that protects human health and the environment. For more information about recycling points for used devices, please contact your local city office, household waste disposal service, or the shop where you purchased the product.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product.
Acer monitor is purposed for video and visual display of information obtained
from electronic devices.
SPECIFICATION
LCD Panel
| Driving System| TFT Color LCD
---|---|---
Size| 27”W (69 cm)
Pixel Pitch| 0.233mm (H) x 0.233mm (V)
Brightness| 250 cd/m² (Typical)
Contrast| 4000:1 (Typical)
Viewable Angle| 178° (H) 178° (V) (CR=10)
Response Time| 5ms (G to G)
Panel Type| VA
H-Frequency| HDMI: 31-112 KHz
DP: 31-112 KHz
V-Frequency| HDMI: 48- 75 Hz
DP: 48-75 Hz
Display Colors| 16.7M Colors
Dot Clock| 295MHz
Maximum Resolution| HDMI: 2560×1440 @ 75 Hz
DP: 2560×1440 @ 75 Hz
Plug & Play| VESA DDCCI/DDC2B
Power Consumption
| On Mode| 20 W (Typical)
Sleep mode| 0.5 W (Typical)
Off Mode| 0.3 W (Typical)
Input Connector| DP (Only DP-Input Model)
HDMI ×2 (Only HDMI-Input Model)
Input Video Signal| DP (Only DP-Input Model)
HDMI ×2 (Only HDMI-Input Model)
Speakers| 2 W x 2
USB| USB3.0 x 4 (Optional)
Maximum Screen Size| Horizontal: 597mm Vertical: 336 mm
Power Source| INPUT: 100-240V~ 50/60Hz
Environmental Considerations
| Operating Temp: 0° to 40°C Storage Temp: -20° to 60°C Operating Humidity:
20% to 80%
Dimensions| 610.5 (W) x 406-556 (H) x 247 (D) mm
Weight (N. W.)| 6.4kg (net)
Mechanism Specifications
| Tilt: -5° to +35°
Swivel: ±60°
Height adjustment: 150mm Pivot: No
Detachable foot stand: Yes
External Controls
|
Switch/Buttons
| Power Button Hotkey 1
Hotkey 2
| Input Menu/Navi/OK
Functions
| Brightness Contrast Blue Light Black Boost ACM
Super Sharpness Gamma
Color Temp. Modes sRGB Mode
Grayscale Mode 6-axis Hue
6-axis Saturate Volume
Mute
OverDrive Adaptive-Sync Refresh Rate Num Language
| OSD Timeout Transparency OSD Lock Input
Auto Source Wide Mode
Hot Key Assignment DDC/CI
HDMI Black Level Quick Start Mode Power-off USB charge Information
Specifications vary depending on model and/or region.
Find manuals and other documents for your Acer product on the official Acer support website.
Declaration of Conformity
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwa
Acer Italy s.r.l.
Viale delle Industrie 1/A, 20020 Arese (MI), Italy Tel: +39-02-939-921 ,Fax:
+39-02 9399-2913 www.acer.it
- Product: LCD Monitor
- Trade Name: ACER
- Model Number: BC270U
- SKU Number: BC270U xxxxxxxxx (“x” = 0~9, a ~ z, A ~ Z, or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation as below Directive and the following harmonized standards and/or other relevant standards have been applied:
| EMC Directive: 2014/30/EU
---|---
EN55032:2015+A11: 2020, CLASS B EN
55035:2017+A11:2020
EN61000-3-2:2019 Class D EN61000-3-3:2013+A1:2019
| LVD Directive: 2 014/35/EU
EN 62368-1: 2014+ A11: 2017
| RoHS Directive: 2011/65/EU
EN 50581:2012
| ErP Directive: 2009/125/EC
(EU) 2019/ 2021; EN 50564:2011
ENERGY STAR®
Acer’s ENERGY STAR qualified products save you money by reducing energy costs
and helps protect the environment without sacrificing features or performance.
Acer is proud to offer our customers products with the ENERGY STAR mark.
What is an ENERGY STAR?
Products that are ENERGY STAR are qualified to use less energy and prevent
greenhouse gas emissions by meeting strict energy efficiency guidelines set by
the U.S. Environmental Protection Agency. Acer is committed to offer products
and services worldwide that help customers save money, conserve energy and
improve the quality of our environment. The more energy we can save through
energy efficiency, the more we reduce greenhouse gases and the risks of
climate change. More information refers to
http://www.energystar.gov.
Acer ENERGY STAR qualified products:
- Produce less heat and reduce cooling loads and warmer climates.
- Automatically go into “display sleep” within 5 minutes of inactivity.
- Wake the monitor when it is in Active Off mode, move the mouse or press any keyboard key.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks
Say hello to a more sustainable product
IT products are associated with a wide range of sustainability risks
throughout their life cycle. Human rights violations are common in factories.
Harmful substances are used both in products and their manufacture. Products
can often have a short lifespan because of poor ergonomics, low quality and
when they are not able to be repaired or upgraded.
This product is a better choice.
It meets all the criteria in TCO Certified, the world’s most comprehensive
sustainability certification for IT products. Thank you for making a
responsible product choice, that help drive progress towards a more
sustainable future!
Criteria in TCO Certified have a life-cycle perspective and balance
environmental and social responsibility. Conformity is verified by independent
and approved verifiers that specialize in IT products, social responsibility
or other sustainability issues. Verification is done both before and after the
certificate is issued, covering the entire validity period. The process also
includes ensuring that corrective actions are implemented in all cases of
factory non-conformities. And last but not least, to make sure that the
certification and independent verification is accurate, both TCO Certified and
the verifiers are reviewed regularly.
Want to know more?
Read information about TCO Certified, full criteria documents, news and
updates at tcocertified.com. On the website, you’ll also find our Product
Finder, which presents a complete, searchable listing of certified products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>