Scosche Industries AWAB4 Apple Watch Charging Cable User Manual
- June 5, 2024
- Scosche Industries
Table of Contents
Scosche Industries AWAB4 Apple Watch Charging Cable
User Manual for Apple watch charging cable
First of all, thanks sincerely for buying this product
- For your safely, please read this manual carefully before using this product
- Please make sure that write down the selling date and sales shop’s name on the warranty, and put it away with operation manual, keep them properly
-
Scope of application
This charging cable is suitable for charging with Apple Watch . -
Standard Accessories
-
Apple watch charging cable*1
-
User manual*1
-
Technical Data
-
Product Name：Apple watch charging cable
-
Model：AWAB4WT-SP
-
Input：DC 5V 1A
-
Output：5W
-
Usage
1. Before charging the watch, ensure that the technical specifications of the device (voltage, current) match the characteristics of the Apple Watch charging cable.
2. Place the watch in the Apple Watch charging port.
3. Plug the Apple Watch charging cable into the charging device (5VDC1A). Your watch will start charging.
4. After use, disconnect the Apple Watch charging cable and charging device port.Attention
- This product requires the correct installation of the 5V1A DC charger.
- Only plug the cord of the product into easily accessible sockets, from which you can quickly disconnect the product if a problem occurs.
- Do not use the product if it is damaged. Never touch the product with wet or damp hands.
- Do not use the product in a humid room or in the rain.
- Never place any metal objects such as keys or paper clips into the product.
- To avoid malfunctions or damage to the product, do not let the product drop, do not squeeze the product, do not cut the product surface nor put too much pressure on it. Protect the product from excess humidity, water and other liquids. If the product comes into contact with water, excess humidity or other liquids, do not use it otherwise there is a risk of electric shock.
- Do not expose the product to heat sources, direct sunlight, do not place it on heaters, stoves or other heat sources such as a dashboard in a car in the summer.
- Do not use the product unattended. The surface of the product may get hot during operation.
- Do not cover the product with any objects during operation.
- Do not use the product immediately when it is moved from a cold are to a hot area. Water condensation can occur and may damage the product. Wait till the product reaches room temperature. It may take several hours.
- Do not attempt to modify, repair or disassemble the product in any way. If the product is damaged, do not use it.
- Never use aggressive detergents, alcohol or other chemical cleaning solutions, as they may damage the surface or functionality of the product.
- Disconnect all attached cables before cleaning.
- Do not immerse the product in water or other liquid. There are no user-serviceable parts inside the product.
- Never disassemble the product. Keep the product out of the reach of children. Never allow children or people with disabilities to use electrical appliances without supervision.
- Make sure the children do not play with the plastic wrapper. They can swallow small parts and suffocate.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. IC Caution Radio Standards Specification RSS-Gen, issue 5 This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.