SONOFF SNZB-01 Zigbee Switch Mini Size-Link-ZigBee-Bridge-logo Instruction Manual
- June 5, 2024
- SonOFF
Table of Contents
SONOFF SNZB-01 Zigbee Switch Mini Size-Link-ZigBee-Bridge-logo
Operation instruction
- Download APP
- 2. Pull out the battery insulation sheet
Add sub-devices
- Connect the Bridge before adding the sub-device
- Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” to add a sub-device. Then long press “RST” reset button on the device for 5s until the LED indicator flashes three times, which means the device has entered the pairing mode, and be patient until pairing completes.
If the addition failed, move the sub-device closer to the Bridge and try again.
Specifications
| Model | SNZB-01 |
|---|---|
| Battery model | CR2450 |
| Working voltage | 3V |
| Wireless connection | ZigBee (IEEE 802.15.4) |
| Working temperature | -10~40℃ |
| Working humidity | 10-90%RH (non-condensing) |
| Material | PC |
| Dimension | 43x43x16mm |
Product Introduction
Features
SNZB-01 is a ZigBee low-energy wireless switch that allows you to move to any place. Peel and stick. Connect it with the Bridge and you can create a smart scene to trigger other devices.
- Low-energy
- Low battery notification
- Smart scene
Button action instruction
You can select to press once, press twice or long-press the wireless switch to control the connected device for various functions.
SONOFF ZigBee Bridge
- supports connecting multiple sub-devices at the same time.
- Power the Bridge on, access the Bridge page in the eWeLink APP, and tap “Add”. Then set the sub-device to be paired to the pairing mode, and be patient until the pairing completes.
Delete sub-devices
- Long press the reset button on the sub-device for 5s until the LED indicator flashes three times. In this case, the sub-device is deleted from the Bridge successfully.
- Users can delete sub-devices directly from the sub-device page on APP.
Installation methods
- Placed on the desktop for use.
- Tear off the protective film of the 3M adhesive and stick the device on the desired area.
- Do not install on the metal surface, otherwise it will affect the wireless communication distance.
- The device weight is less than 1 kg.
- The installation height of less than 2 m is recommended.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>