DELUX KS200D Mechanical Keyboard User Manual
- October 30, 2023
- DELUX
Table of Contents
DELUX KS200D Mechanical Keyboard
User Manual
KS200D Mechanical Keyboard
Thank you for choosing this mechanical keyboard. For better use, please read the user manual carefully before use it.
Package Content
Scroll button with volume and brightness adjustment
Fn combination keys
Fn+F1: Brightness reduce
Fn+F2: Brightness increase
Fn+F3: Select ALL
Fn+F4：Copy
Fn+F5: Paste
Fn+F6: Cut
Fn + ↑/↓to adjust brightness
Fn + ←/→to switch the speed of backlight
Fn+ Win: lockWin function
Fn + Backspace 3s to reset
| Key function | Indicator Icon |
|---|
Last song
Play/Pause
Next song| Case indicator
Win lock indicator
Charging indicator
Keyboard Usage
Charging method
Connect data cable to keyboard and plug it into USB port for charging. When
charging, the indicator light will turn red, and indicator light will go off
when fully charged.
Connection way
Wired mode: switch to the wired mode, connect data cable to keyboard, insert
the USB port to computer, and use it when the device is recognized normally.
2.4G mode: switch to wireless mode, press 2.4G mode button shortly, button
indicator will flash slowly, insert the receiver, and use it when button
indicator keeps on. (If you need to re-code: long press 2.4g mode key for 3
seconds, and button indicator light will flash quickly, and the key indicator
light keeps on after it is connected).
BT mode: switch to wireless mode, short press BT1/BT2/BT3 button, and
indicator will flash slowly. After BT pairing is successful, indicator light
keeps on, and you can use it.(BT code: long press BT1/BT2/BT3 for 3 seconds,
and key indicator flashes. search BT Keyboard “BT3.0 Keyboard” or “BT5.0KB”
from BT device, click for pairing, and key indicator keeps on after it is
connected).
System switching
The light is off by default, and the keyboard defaults to Win system mode.
Press the button, light is always on, and the keyboard switches to Mac system
mode.
Wheel function
Default volume adjustment mode. Press wheel button to switch to brightness
adjustment mode. Clockwise rotate to increase volume/light, counterclockwise
rotate to decrease volume/light.
| Multimedia Button | MAC | Win |
|---|---|---|
| Brightness- | Brightness- | |
| Brightness+ | Brightness+ | |
| Select all | Select all | |
| Copy | Copy | |
| Paste | Paste | |
| Cut | Cut |
*Above multimedia keys need combine with FN keys together.
Driver installation instructions
Driver installation Download the driver from the official website or obtain the
driver from the CD attached to the package(optional), and use it after
installation. After configuring the driver, the keyboard can be set to key
settings, macro settings, and light settings.
Driver Settings Open the driver setting interface (need to insert Type-C cable
to connect the device, otherwise the driver cannot be turned on), button
setting, macro setting and light setting can be performed. Multiple groups of
configuration files can be set in M1/M2/M3 mode, and the top of the interface is
a menu.
Button setting
At the top of interface, click M1/M2/M3, click the button to be set, and then
click the left keyboard/macro definition/multimedia to set. Enter the button
you want to set or in the drop-down menu Select the multimedia function
settings. After the setting is successful, click OK and Apply to complete the
setting.
Keyboard key setting
Click the button to be set, select “keyboard” to input the button you want to
set, click OK and apply to complete the setting.
Macro key settings
Click the button to be set, select “Macro Definition”, select the macro command
that has been set, and click OK and apply to complete the setting. (Refer to B
macro setting)
Multimedia key Settings
Click the button to be set, select “Multimedia”, select the multimedia
function in the drop-down menu to set, click OK and apply to complete the
setting.
Macro settings
Under the corresponding configuration file, click “Macro Editor” to enter the
macro setting interface, right-click in the “Macro List” position and select
“New Macro” to enter the macro name, select the corresponding macro name, and
click “Start Recording Macro”. During the recording process, you can Enter the
required keys on the keyboard, and then click “Stop Recording Macro”, set the
properties, and click Save. Import macro operation instructions: In the button
setting, click the button to be set, select the macro name in the “Macro
Definition”, and then click OK and apply to complete the setting.
lighting settings
Click “Light” to set the overall lighting effect of the keyboard. Select
different lighting modes from the drop-down menu, and click “Apply” to make the
keyboard display different lighting effects. Users can adjust the brightness and
speed by themselves.
Restore Settings Click
“Restore Default” in the lower left corner of the interface, and click “Apply”
to restore the keyboard to the factory default setting. (In M1/M2/M3 mode, you
need to click respectively to restore the factory settings in the
corresponding mode)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>