bol x9PEKk3QW74B Wireless Earplugs Instruction Manual
- June 5, 2024
- bol
Table of Contents
bol x9PEKk3QW74B Wireless Earplugs
Parameter Configuration
Real wireless connection (TWS) realizes wireless stereo, left and right
channel separation, HIFI sound effect. The left and right earphones have
complete Bluetooth function and can be used alone..
Bluetooth pairing
- Single-ear connection: long press the multi-function button and release the button. At this time, the red and the blue lights will flicker alternately. After successful connection, you can listen to music or make a phone call.
- Pairs of ears (TWS) connection: long press the multi-function button of the two earphones at the same time, double click either side of the multi-function button to enter the TWS pairing state, or long press the button for 3 seconds to pair, and there will be corresponding prompt sound, when it is found that only the blue light slowly flashes, it means that the TWS connection is successful.
Note: Calls only support for both sides bluetooth headset. Shutdown, play and pause can be controlled by any multifunctional button of connected headset. The next time you boot up, press the multi-function button directly to automatically connect back.
Bluetooth usage
Make a call
When the headset is switched on and connected to the Bluetooth device with mobile phone or call function, you can make a phone call. When called, the headset will have caller id function. Short click a switch key to answer the call, if you do not want to answer the phone call, you can quickly press the two switch machine key (call rejection). In case when you’re playing music, press the two switch key quickly and then dial the last phone number registration. (The last digit redial).
Listen music
When the headset is turned on and connected to the mobile phone or Bluetooth device with Bluetooth function successfully, the player can be opened to listen to music. In the process of listening to music, press the “on/off’ button once to pause the currently played music and then play the suspended music one time again.
Turn it off
When you do not need to listen to music, you can press the switch button for a long time until the red light is on and then let go. At this time, Bluetooth is turned off. If the Bluetooth is far away from the Bluetooth device or shuts down. The Bluetooth will be disconnected. After five minutes of disconnection the device will shut down automatically.
Charging
When the headset is at low battery power, a low power prompt will appear. At this time, the device must charged. The red lights will always turn on when the headset is charged and the red lights will change into blue lights when the battery is fully charged.
Voice prompt
Long press the main button of the headset. When you hear the Chinese/English prompt sound of the headset, it means that the headset has been switched successfully. (Chinese/English switching is supported)
Matters needing attention
- Please do not treat this product violently, nor do you need to squeeze heavy objects and keep away from high temperatures and high humidity.
- Keep away from children. This product contains small object and causes danger to choking and other.
- Keep away from WIFI and routers and other high-frequency launches, which will affect the signal reception. Which causes the sound to break up and disconnect.
- Please use this product in an effective environment (10 meters), and there no entity block between Bluetooth device and earphone.
Note: this product can be connected with any device with Bluetooth function.