VLISBO MK-001 Bug Zapper User Manual
- May 15, 2024
- VLISBO
Table of Contents
VLISBO MK-001 Bug Zapper
Specifications
- Model: MK-001
- Power Input: USA: 90-130V/60Hz, UK/EU: 200-250V/50Hz
- Power Output: 18W
- Voltage Output: 4200V
- Coverage Area: 1 Acre
Product Usage Instructions
Installation
To install the product, follow these steps:
- Ensure the device is unplugged.
- Screw the tray clockwise to open it.
- Remove any insect bodies from the tray.
Safety Precautions:
It is important to follow these safety precautions while using the product:
- Keep the device out of reach of children.
- Avoid touching the metal grid when the product is operational.
- Do not use in hazardous areas with flammable or explosive materials.
Country of Origin:
This product is made in China.
TECHNICAL PARAMETERS
- Product name: Mosquito Killer
- Distributor Model No: MK-001
- Input voltage: USA:90-130V/60Hz UK/EU:200-250V/50Hz
- Light source : 18W UV tube
- High voltage metal grid: 4200V
- Attract area: 1 Arce
HOW THE ZAPPER WORKS
The Insect Zapper is designed to attract and kill a wide range of flying insects. The ultraviolet (UV) light given off by this unit is effectively proven to lure these insects within the luminescent range. Insects are attracted to the light and killed as they contact the electrically-charged grid area and then fall into the bug tray. The outer protective cage helps prevent pets, birds, butterflies, and children’s fingers from contacting the charged grids. This unit is for indoor/outdoor residential use only.
PACKING DETAILS
- User Manual: 1
- Mosquito Killer: 1
- Brush: 1
OPERATION
This Insect Zapper Lantern has 2 operating modes
- a. By pushing the switch to the side with 1 line (1), the unit will operate in Bug Zapping mode, working with the insect zapping UV bulb. The UV light will always being on.
- b. By pushing the switch to the side with 2 lines (I1), at the positionof automatic on/off, it will turn on the light and electrical at night time and turn off at day.
- C. Turn the unit OFF by positioning the switch in the center, indicated with a circle (0)
CONTROLLER BUTTONS
WARNING
PLEASE READ THESE INSTRUCTIONS BEFORE USING THE INSECT ZAPPER
-
Keep away from Children!
-
Don’t touch the metal mesh of this mosquito-killing lamp when it’s working.
It is strictly prohibited to be used in the environment of combustible, inflammable and explosive materials and dangerous chemicals -
Household use only.
-
Extension cords are available. An extension cord can be used, such as “Use extension cord marked as SJW-A, SJEW-A, or SJTW-A only”, or the equivalent.
-
Use only extension cords that have plugs and receptacles compatible with the product’s plug. Replace or repair damaged cords immediately.
-
The electrical rating of the extension cord must be as great as the electrical rating of the product.
-
Don’t Abuse the Cord – Never carry the product by cord or yank it to disconnect it from the receptacle. Keep cord away from heat source, oil, and sharp edges.
-
Disconnect the product from the power supply when not in use, changing bulbs, cleaning, and before servicing and similar actions.
-
Do not insert foreign objects into this product.
-
Outdoor extension cords must be used for products outdoors and are marked with suffix letters “W-A” and with a tag stating “Suitable for Use with Outdoor Appliances on its surface.
-
The connection to an extension cord should be kept dry and off the ground.
-
Store products indoors when not in use – out of reach of children.
-
Do not clean this product with a water spray or similar method.
-
The product should only be connected to a circuit that is protected by a ground-fault circuit interrupter (GFCI).
-
Any other servicing should be performed by a service representative.
-
If the unit is malfunctioning, unplug it and contact the manufacturer.
-
Do not place the unit in an area where it easily falls into water or near flammable materials.
-
Avoid directly looking into the UV light. Skin or Eye damage may result from directly viewing the light produced by the lamp of this apparatus.
-
Insect accumulation on the base of the unit may contribute to fire. Clean dead insects from the unit frequently as noted in this manual.
-
In areas with large insect populations, the electric grid may begin to accumulate dead insects on the grid, which can affect the function of the device. To ensure the effective us e of this device, periodic cleaning of the electric grid with the included brush is necessary.
-
The rate of cleaning depends on the insect population in your area.
Tips:
1. Using the available lure will add to the effectiveness of the unit such
as by adding scent has proven to attract more insects to the unit.
2. It is recommended that this unit stay stored indoors during
inclement weather.
Warning: Beware of electric shock to childrenn’t touch the metal mesh of the light when the electric shock light turns red. It is strictly prohibited to use in the environment of combustible gas, gas, inflammable and explosive materials, and dangerous chemicals.
ELECTRIC GRID CLEANING
- Always unplug your Bug Zapper before cleaning to avoid electric shock.
- When cleaning the electric grid, please use the included cleaning brush to avoid any risk of shock or injury. Ignoring this warning may result in death or injury.
WARNING
- In areas with large insect populations, the electric grid may begin to accumulate dead insects on the grid, which can affect the function of the device. To ensure the effective use of this device, periodic cleaning electric grid with the included brush is necessary.
- The rate of cleaning depends on the insect population in your area.
WARNING
Pls, Turn it off when it rains for a long time to avoid danger.
- Danger/High Voltage
- Keep Out Of Reach Of Children
- When the product is working, do not touch the metal grid
- Do not use it in hazardous areas with inflammable or explosive material(e.g. Gas Stations, Fireworks, Factories, LPG Stations)
FAQ
(Frequently Asked Questions)
- Q: Can the voltage output be adjusted?
- A: No, the voltage output of the device is fixed at 4200V for effective insect control.
- Q: How often should the tray be cleaned?
- A: It is recommended to clean the tray regularly to maintain the efficiency of the product. Depending on usage, clean it at least once a week.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>