infobit BV40 Video Conference Camera Instruction Manual

infobit BV40 Video Conference Camera

BV40 Video Conference Camera with Expansion Microphone(s)

Controls and Functions

• Front View
• Rear View
• Top View**
  Buttons| Indicator status| Functions
  ---|---|---
  1 Connection indicator| Orange LED lights| Connected to PC successfully via USB
  Blue LED flashes| Disconnected
  2 Microphone mute| Orange LED lights| All the mics mute
  3 Speakerphone mute| Orange LED lights| Speakerphone mute
  4 Volume down**| Blue LEDs decrease progressively|

Volume down

5 Volume up| Blue LEDs increase progressively|

Volume up

6 Power on/off| Blue LED lights| Press 3 seconds to power on
Blue LED off| Press 3 seconds to power off

Wireless Expansion Microphones.Top View(left), bottom View(right)

acts as the charging interface.Charging

copper ring contacts spring probe for charging

BATTERY INFO

Expansion mic| Battery| Charging time| Standby time| Working time
---|---|---|---|---
| ****

• the audio output of this device use the same USB interface with video and supports the standard UAC protocol. All the software which supports the UAC protocol can collect the audio of this device.
• Daisy-chain max up to 3 wireless expansion microphones connect to main unit via RF2.4G transmission. Each expansion microphone provides 3 meters pick up range. To ensure the call quality and echo cancellation effect, please do not move the expansion microphone after placing it on the table. At the same time, expansion microphones need a distance at least 1 meter from the speaker.
• The main unit has an internal auxiliary microphone for emergency use when the expansion mics are out of power. Expansion mics are recommended for the best call experience. When any expansion mic is turned on, the internal mic will be automatically disabled.

Combination Key Function

1. Chinese and English switching
   • Press and hold for 5 seconds to switch prompt tone between Chinese and English
2. Prompt tone ON/OFF
   • Prompt tone is turned on by default. Press and hold turn ON/OFF.
3. Enable or disable the internal microphone
   • Press and hold for 5 seconds to enable or disable the internal mic
4. Remote upgrade mode
   • (This function needs the support of the manufacturer, please do not use it under normal circumstances)
   • Press and hold for 5 seconds to enter remote upgrade mode, only the orange indicator of the Power button lights.
   • Press and hold for 5 seconds to exit the upgrade mode.

Pairing Wireless Microphones

Turn on the expansion microphone, the indicator light flashes blue. Press the microphone mute button the indicator light flashes blue. Press the microphone mute button and the indicator light turns red.Put the expansion microphone close to the main unit. Press and hold the microphone mute button for 10 seconds. After the indicator light stops flashing, the wireless microphone is successfully paired.

Music Mode

Press the microphone mute button of the main unit, then all the microphones are disabled. Now only the speaker works and enters the music mode, and it is the stereo play mode.

Charging tray

What is content in package ?

1. Video conference camera * 1
2. User’s manual * 1
3. Expansion mics * 1-3
4. Charging tray * 1-2
5. Bracket and screws * 1
6. USB 3.0 cable 3M * 1
7. Power supply of the camera * 1
8. Power supply of the charging tray * 1-2
9. USB – type C cable * 1-2
10. Remote control (no battery) * 1

Remote control’s functions

| Functions
---|---
1 Power on/off

2

| Power on/off
Zoom out

3

| Camera zoom out
Zoom in| Camera zoom in
4 Camera functions’ menu| Camera functions’ menu (center) EPTZ control (up, down, left, right)
5 Microphone mute| Microphone mute
6  Speakerphone mute| Speakerphone mute
7 Volume up/down| “+” volume up; “-” volume down

Note: If the remote control is not available, maybe the batteries ran out. Please change the new batteries(AAA*2pcs) .

Auto-Framing

VB40 support Auto-Framing camera control, automatically moves the lens and adjusts the zoom to comfortably frame meeting participants in rooms of all shapes and sizes.

1. Press “Camera functions menu” (center), select “ Setup”
2. Select “ AI Function” to “ON”, the Auto-Framing function turns on. AI “Refresh Freq” is adjustable “Low/Mid/High”.

Installation instruction

1. Desktop installation
   • Put the device on the table or screen and make sure the horizontal installation.
2. Bracket installation
   • Screw the bracket to the screw hole at the bottom of the device and tighten it. Then the user can install a bracket at the bottom of the device. The screws of the bracket must meet the following specifications.

Note:

1. The wall-mounted bracket must be flat
2. The wall bracket is used in conjunction with the bracket. The device must install the bracket

Connect to the computer

• Connect the 12V power supply to the camera.  Connect the standard USB cable with the camera and computer or other host computer. Refer to the following picture:

Video instruction

This device output video through USB. And it supports standard UVC protocol. All the software which support the UVC protocol can collect the video of this device.

Demonstrate the video usage of the device with common software AMCAP.

1. Open the AMCAP (available in the CD) and click the Devices. Then choose the 4K UCamera (or the similar option)
2. Click the Options and choose Preview. Then the user can preview the video. Refer to the right picture.

If the frame rate is not enough, the user can check whether the “ Use Frame Rate” is ticked off. If yes, please cancel the tick

1. Click the Capture and then choose Set Frame Rate
2. In Choose Frame Rate, check whether the “Use Frame Rate” is ticked off. If yes, please cancel the tick. And then click the Apply Cancel the tick in the frame

Change the different resolution and frame.

1. Click the Options and choose Video Capture Pin…,
2. Set the different resolution and frame according to the user’s requirement. And then click Apply

How is working in meeting rooms?

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>