AXIS W701 Docking Station 8 Bay Installation Guide
- June 5, 2024
- AXIS
Table of Contents
AXIS W701 Docking Station 8 Bay
WHAT IS INBOX
INSTALLATION
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in damage to property.
Other message levels
Important
Indicates significant information which is essential for the product to function correctly.
Note
Indicates useful information which helps in getting the most out of the product.
Safety instructions
- The Axis product shall be used in compliance with local laws and regulations.
- Axis recommends using a shielded network cable (STP).
- Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
- Do not use chemicals, caustic agents, or aerosol cleaners.
- Use a clean cloth dampened with pure water for cleaning.
- Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
- Use only spare parts provided by or recommended by Axis.
- Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.
Transportation
NOTICE
- When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.
Legal considerations
Video and audio surveillance can be regulated by laws that vary from country
to country. Check the laws in your local region before using this product for
surveillance purposes.
Liability
Every care has been taken in the preparation of this document. Please inform
your local Axis office of
any inaccuracies or omissions. Axis Communications AB cannot be held
responsible for any technical or typographical errors and reserves the right
to make changes to the product and manuals without prior notice. Axis
Communications AB makes no warranty of any kind with regard to the material
contained within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance or use of
this material. This product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to technology embodied in
the product described in this document. In particular, and without limitation,
these intellectual property rights may include one or more of the patents
listed at axis.com/patent and one or more additional patents or pending patent
applications in the US and other countries. This product contains licensed
third-party software. See the menu item “About” in the product’s user
interface for more information. This product contains source code copyright
Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see
opensource.apple.com/apsl). The source code is available from
developer.apple.com/bonjour/.
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in the user documentation. This
equipment contains no
user-serviceable components. Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications and approvals.
Trademark acknowledgments
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis
AB in various jurisdictions. All other trademarks are the property of their
respective owners.
Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, and WWW have registered
trademarks of the respective holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of Oracle and/or its affiliates.
The UPnP Word Mark and UPnP Logo are trademarks of Open Connectivity
Foundation, Inc. in the United States or other countries.
Regulatory information
This product complies with the applicable CE marking directives and harmonized standards:
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See Electromagnetic Compatibility (EMC) on page 4.
- Low Voltage Directive (LVD) 2014/35/EU. See Safety on page 6 .
- Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates or replacements. See Disposal and Recycling on page 6.
A copy of the original declaration of conformity may be obtained from Axis
Communications AB. See Contact information on page 10.
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards
for:
- Radiofrequency emission when installed according to the instructions and used in its intended environment.
- Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.
USA
This equipment has been tested using an unshielded network cable (UTP) and
found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC rules. This equipment has also been tested using a shielded
network cable (STP) and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Canada
This digital apparatus complies with CAN ICES-3 (Class A). The product shall
be connected using a shielded network cable (STP). Cet appareil numérique est
conforme à
la norme NMB ICES-3 (classe A). Le produit doit être connecté à l’aide d’un
câble réseau blindé (STP).
Europe
This digital equipment fulfills the requirements for RF emission according to
the Class A limit of EN 55032. The product shall be connected using a shielded
network cable (STP). Notice! This is a Class A product. In a domestic
environment, this product may cause RF interference, in which case the user
may be required to take adequate measures. This product fulfills the
requirements for immunity according to EN 61000-6-1 for residential,
commercial and light-industrial environments. This product fulfills the
requirements for immunity according to EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to EN 55024
office and commercial environments.
Australia/New Zealand
This digital equipment fulfills the requirements for RF emission according to the Class A limit of AS/NZS CISPR 32. The product shall be connected using a shielded network cable (STP). Notice! This is a Class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures.
Safety
This product complies with IEC/EN/UL 60950-1, Safety of Information Technology
Equipment. If its connecting cables are routed outdoors, the product shall be
grounded either through a shielded network cable (STP) or another appropriate
method.
Disposal and recycling
When this product has reached the end of its useful life, dispose of it
according to local laws and regulations. For information about your nearest
designated collection point, contact your local authority responsible for
waste disposal. In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be disposed of together with
household or commercial waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the European Union member states.
To prevent potential harm to human health and the environment, the product
must be disposed of in an approved and environmentally safe recycling process.
For information about your nearest designated collection point, contact your
local authority responsible for waste disposal. Businesses should contact the
product supplier for information about how to dispose of this product
correctly.
This product complies with the requirements of Directive 2011/65/EU and
2015/863 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
China
This product complies with the requirements of SJ/T 11364-2014, Marking for
the restriction of hazardous substances in electrical and electronic products.
Installation Guide
AXIS W701 Docking Station 8 Bay © 2020 – 2021 Axis Communications AB Ver. M3.2
Date: June 2021 Part No. 2309533
References
- Axis Communications - Leader in network cameras and other IP networking solutions | Axis Communications
- Learning | Axis Communications
- Patent statement | Axis Communications
- Welcome to Axis support | Axis Communications
- License - APSL