Dyna-Glo DGW1235BDP-D Wide Body Vertical Gas Smoker User Manual
- June 5, 2024
- Dyna-Glo
Table of Contents
DGW1235BDP-D Wide Body Vertical Gas Smoker
User Manual
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday or e-mail customerservice@ghpgroupinc.com.
NO NEED TO RETURN TO THE STORE
Questions With The Assembly?
Require Parts Information?
Product Under Manufacturers Warranty?
Call Toll-Free: 1-877-447-4768
8:00 a.m. — 4:30 pm CST, Monday — Friday
Retain This Owner’s Manual And Proof Of Purchase For Future Reference
To help us help you
Fill in the information below:
THE MODEL NUMBER AND PRODUCT SERIAL
NUMBER CAN BE FOUND ON
THE RATING LABEL OF YOUR GRILL.
Assembler/Installer: This instruction manual contains important
information necessary for the proper assembly and safe use of this appliance.
Read and follow all warnings and instructions before assembling and using this
appliance. Leave these instructions with the consumer.
Consumer/User: Follow all warnings and instructions when using this appliance.
Keep these instructions for future reference.
DANGER:
If you smell gas:
- Shut off gas to the appliance.
- Extinguish any open flame.
- Open lid.
- If the odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.
DANGER:
Failure to follow these instructions could result in fire, explosion, or burn
hazards which could cause property damage, personal injury or death.
DANGER
- Never operate this appliance unattended.
- Never operate this appliance within 10 feet (3 m) of any structure, combustible material or another gas cylinder
- Never operate this appliance within 25 feet (7.5 m) of any flammable liquid.
- Never allow oil or grease to get hotter than 400°F or 200°C, if the temperature exceeds 400°F (200°C) or if oil begins to smoke, immediately turn the burner or gas supply OFF.
- Heated liquids remain at scalding temperatures long after the cooking process. Never touch cooking appliance until liquids have cooled to 115°F (45°C) or less.
- If a fire should occur, keep away from the appliance and immediately call your fire department. Do not attempt to extinguish an oil or grease fire with water.
DANGER: Failure to follow these instructions could result in fire,
explosion, or burn hazards which could cause property damage, personal injury
or death.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product. If you have any questions regarding the
product, please call customer service at
1-877-447-4768, 8:00 a.m. – 4:30 p.m.
CST, Monday – Friday.
CALIFORNIA PROPOSITION 65
WARNING
This product and the fuels used to operate this product (liquid propane or
natural gas), and the products of combustion of such fuels, can expose you to
chemicals including benzene, which is known to the State of California to
cause cancer or other reproductive harm.
For more information go to
www.p65Warnings.ca.gov
-
DO NOT use this product for anything other than its intended purpose. It is NOT intended for commercial use. It is NOT intended to be installed or used in or on a recreational vehicle and/or boat.
-
Keep a fire extinguisher near this product at all times.
-
This appliance is for outdoor use only in well-ventilated areas. DO NOT operate it in a building, garage, or any other enclosed area, or under overhead construction.
-
A minimum clearance of 36 in. (92 cm) to combustible material is required on the front, sides, and back.
It is very important to always maintain proper clearances to combustibles. -
The cylinder must be at least 24 in. (61 cm) from the appliance.
-
DO NOT obstruct the flow of combustion air/or ventilation air for the appliance.
-
When cooking, the smoker must be on a level, stable non-combustible surface in an area clear of combustible material, including long or dry grass.
-
Care should be taken to protect the fuel supply hose from damage from either pedestrian or vehicle traffic.
-
Clean and inspect the hose before each use of the appliance. If there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced prior to the appliance being used. The replacement hose assembly shall be specified by the manufacturer.
-
Before each use check that no dead leaves or debris are under the appliance.
-
Store this appliance in a dry, protected location.
-
The use of alcohol, prescription, or nonprescription drugs may impair the user’s ability to properly assemble and safely operate this appliance.
-
Allow the smoker to cool to 115°F (45°C) before moving or storing. Use caution when lifting and moving the appliance to avoid back strain or back injury. DO NOT move the appliance while it is in use.
-
Always hang the regulator on the lifting handles while not in use or disconnected with the LP tank.
KEEP the fuel supply hose away from any heated surface(s).
****SAFETY INFORMATION
- DO NOT store or use this appliance near gasoline or other combustible liquids or where other combustible vapors may be present.
- DO NOT use this appliance as a heater.
- DO NOT leave the appliance unattended while in use. Keep children and pets away from the appliance at all times.
- NEVER close the damper completely while cooking.
- If you must dispose of ashes in less time than it takes for the ashes to completely cool down, then remove the ashes from the appliance, keep them in the heavy-duty foil, and soak them completely with water before disposing of them in a noncombustible container.
- This appliance will be hot during and after use. Use insulated oven mitts or gloves for protection from hot surfaces or splatter from cooking liquids.
- Make sure that the orifice of each control valve properly mates with the burner mixing tube by visual observation. Please refer to the maintenance section.
- Use caution when opening the doors of the smoker while in operation. Keep hands, face, and body safe from hot steam or flare-ups. DO NOT inhale smoke.
- DO NOT wear loose clothing while operating the smoker. Tie back long hair while operating the smoker.
- ALWAYS wear shoes that fully cover your feet while operating the smoker.
- Allow the smoker and its components to cool completely before conducting any routine cleaning or maintenance.
- NEVER use glassware, plastic or ceramic cookware on or in your smoker. Use metallic cookware only.
- NEVER operate the smoker without water in the water bowl. NEVER allow the water to completely evaporate. Check the water level at least every 2 hours. A sizzling sound may indicate a low water level. Follow instructions in this manual for adding water while operating (see page 15).
- When using flavoring wood, add a sufficient amount prior to operation to avoid having to add wood while operating. Adding wood while operating may splash hot water and cause serious injury.
- Use of accessories not intended for this smoker is not recommended and may lead to injury or property damage.
- An LP cylinder not connected for use should not be stored in the vicinity of the smoker or any other appliance. DO NOT store spare LP cylinders within 10 ft. (3 m) of the smoker. LP cylinders must be stored outdoors, out of reach of children. DO NOT store LP cylinders in a building, garage, or any other enclosed area.
- DO NOT store LP gas cylinders inside or on top of the smoker. Improper storage of cylinders could lead to an explosion, fire, and/or personal injury. Cylinders are to be stored outdoors, out of reach of children, and must not be stored in a building, garage, or any other enclosed area.
- While the smoker is not in use, the gas must be turned off at the supply cylinder.
- LP gases are heavier than air, tend to pool and collect in low-lying areas, are easily ignited, and are highly flammable. Proper care and caution should be employed when dealing with any such fuels.
- The smoker should be turned off and all supply valves (on piping or on fuel cylinders) should be closed in the event that the odor of unburned gas is detected. Do not attempt to use the appliance until any gas leaks are fixed and/or the source of the unburned gas odor is accounted for.
- Do not use the smoker if the burner fails to light or fails to remain lit. Under such conditions, the gas should be turned off and the fuel cylinder should be disconnected.
- Use in high wind conditions that result in poor burner operation such as blowing out and flaring should be avoided. If repositioning the appliance does not improve operation under such wind conditions, the appliance should be turned off.
- Install the smoker with the hose regulator assembly extended the full length of the hose (24 in./61cm minimum) directly away from the appliance. When so configured, placement results in the maximum tank to smoker distance. When the smoker is operated, the hose/regulator and gas tank should be perpendicular to the wind direction. Placing the tank closer than 24 in./61cm to the smoker can overheat the tank and cause the release of propane through relief openings and can result in tank fire or explosion.
- Read and follow all warnings and instructions before assembling and using the appliance.
- Follow all warnings and instructions when using the appliance.
NOTE: The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.
WARNING:
The hose to tank attachment creates a potential trip hazard for users and
pedestrians – use caution. Do not allow or cause the gas tank or appliance to
tip.
The electronic ignition requires 1 “AAA” alkaline battery, which is included.
WARNING
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium)
batteries.
DO NOT dispose of batteries in a fire. Improper disposal may cause batteries
to leak or explode.
ASSEMBLY INSTRUCTIONS
- Slide the grease cup (I) onto the grease cup support of the smoker body (G) bottom. Repeat on the other side.
- Remove the igniter cap by turning it counter-clockwise. Insert the AAA battery (U) into the igniter body with a positive (+) end facing out. Replace the igniter cap.
OPERATION INSTRUCTIONS
CONNECTING THE LP TANK
WARNING! ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO
PREVENT FIRE, DAMAGE, AND/OR INJURY.
- The knob on the LP tank must be closed. Make sure that the knob is turned clockwise to a full stop. The cylinder supply system must be arranged for vapor withdrawal.
- Check that the control knob on the control unit is turned off.
- Remove the protective cap from the LP tank valve and coupling nut.
- Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the nipple is centered in the valve outlet. The coupling connects to the large outside threads on the valve outlet. Use care – do not cross-thread the connection.
- Hand tightens the coupling clockwise until it comes to a full stop. Firmly tighten by hand only.
Do not use tools.
CAUTION: In the connection process, make sure the regulator inlet connector mates with the cylinder valve outlet properly, safely, and firmly.
Any fuel supply cylinder used must be constructed and marked in accordance
with specifications for propane cylinders of the U.S. Department of
Transportation (DOT) CFR 49, or the Standard for Cylinders, Spheres, and Tubes
for the Transportation of Dangerous Goods, CAN/CSA B339. The appliance is to
be used only with the 20-pound, vertical standing vapor withdrawal-type tank
and must include a collar to protect the cylinder valve.
(A) DO NOT store spare LP cylinders under or near the smoker.
(B) NEVER fill cylinder more than 80% full.
(C) Do not store cylinder indoors.
WARNING
If instructions (A), (B),(C) above are not followed exactly, a fire causing
death or serious injury may occur.
This smoker is designed to operate on LP (Liquid Propane) gas only. The gas
cylinder used must include a collar to protect the cylinder valve. The
cylinder supply system must be arranged for vapor withdrawal. Do not allow
dirt or foreign material to get into or onto tank connection when it is not
attached to the fuel supply system. Use the protective cap provided.
WARNING
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE,
DAMAGE AND/OR INJURY.
The cylinder outlet must have Type 1 gas connection termination in order to
mate with gas hose provided with smoker. The pressure regulator and hose
assembly supplied by the manufacturer with the appliance must be used.
Replacement pressure regulators and hose assemblies must be those specified by
the appliance manufacturer.
This unit is not to be utilized with a non-self-contained LP-gas supply
system.
Valve/pressure regulators are factory set to the correct operating pressures.
No attempts should be made to adjust these settings.
DISCONNECT THE LP TANK
Make sure that the knob on the LP tank is turned clockwise to a full stop
(CLOSED).
Hold the regulator in one hand, turn the coupling to the valve outlet
counterclockwise and unthread the connection by hand only. Do not use tools.
Place dust cap on cylinder valve outlet whenever the cylinder is not in use.
Only install the type of dust cap on the cylinder valve outlet that is
provided with the cylinder valve. Other types of caps or plugs may result in
leakage of propane.
Always hang the regulator on the lifting handles (B) while not in use,
disconnect from the LP tank, and when the unit has cooled down.
STORE THE TANK IN A PROPER PLACE AS INDICATED IN THIS MANUAL.
CHECKING FOR LEAKS
After connections are made, check all connections and fittings for leaks with
a soap solution.
- With all valves closed, apply the leak check solution (50/50 mix of dishwashing soap and water) to all gas-carrying connections and fittings.
- Open tank valve.
The presence of bubbles in areas of the wet solution indicates a gas leak. If
leaks are detected or you smell or hear gas, shut off the valve and repair the
leak or replace the defective part.
Do not use the smoker until all leaks are corrected.
The gas hose/regulator assembly should be totally extended to the maximum
distance so that the hose is straight and the tank is as far from the smoker
as it can be (Minimum 24 in.).
For vapor withdrawal, LP tanks are intended to be operated in the upright
position only.
If the product is not in use, the gas must be turned off at the supply
cylinder and the cylinder should be disconnected from the appliance.
Storage of the appliance indoors is only permissible if the cylinder is
disconnected and removed from the appliance. Do not store cylinder indoors.
OPERATION
BEFORE FIRST USE
Remove all hangings or plastic straps, if present.
Before you cook food in your smoker, it is important to “season” your smoker.
Seasoning seals the paint and interior of your smoker to enhance flavoring,
durability and overall performance.
To season your smoker, simply use it as you normally would only do not cook
any food. You will need to follow all of the operating procedures in the next
few sections of this manual.
Using your desired flavoring woods and marinades, burn your smoker at low
temperature (around 175°F/79°C) for 45 – 60 minutes. Let the smoker cool, and
clean out the water and wood.
Once seasoning is complete, your smoker’s interior will have a durable,
seasoned coating.
Adding Water
To add water before cooking, simply remove the water bowl and fill it with
water slightly below the rim. Then place the bowl back into the smoker. Enough
water before cooking is recommended.
To add water while cooking, if a sizzling sound indicating a lack of water is
heard, or really need to add water, open the bottom door with care and avoid
taking in the smoke, use a long nose kettlelike water can, stand yourself as
far from the smoker as you can, fill the water bowl up to 1 in.
CAUTION: DO NOT pull the water bowl out beyond the rack when the smoker is hot.
Cooking Tip
Line the water bowl with aluminum foil before each use. This will make it easy
to clean and help your water bowl last longer.
To make adding water easier and safer, use a clean watering can with a long
spout.
Adding Wood Chips
To add wood chips before cooking, simply fill the wood chip box with your
choice of flavoring hardwood chips. The amount and type of wood you use is
entirely dependent on the desired amount of flavor.
Once the box is filled, place the lid on top of the box and set the box in the
smoker.
To add wood chips while cooking, we recommend using tongs or long-handled
pliers to remove the box lid and to place the pieces into the wood chip box
without removing the box. It is not recommended to remove the wood chip box
while the smoker is in operation.
CAUTION: The wood chip box and lid get very hot. Avoid handling them
while in use.
Always wear protective oven mitts when handling hot components.
Cooking Tip: Flavoring Wood
- Small wood chips work best inside the wood chip box.
- Use dry hardwoods such as hickory, pecan, apple, cherry or mesquite.
- Most fruit or nut tree woods produce excellent smoke flavoring.
- Do not use resinous woods such as pine or plywood. These usually produce unpleasant flavoring.
- Let your taste be your guide. Experiment with different types and quantities of wood chunks, chips, or sticks. You can even mix woods.
- To produce more smoke and prevent fast burning, pre-soak the wood chips in a separate bowl of water for at least 20 minutes, or wrap the chips in perforated aluminum foil.
- Most smoke flavoring occurs within the first hour of cooking. Adding wood chips after the first hour is typically not necessary unless extra smoke flavoring is desired.
TIPS ON SMOKING
Smoking foods is different from grilling foods. Smoking is typically done
slowly and at a lower temperature than grilling. The smoke produced by the
wood infuses itself into the meat giving it that great smoked flavor. Grilling
is a much quicker cooking process using higher temperatures.
Always follow the manufacturer’s recommendations for cleaning and care.
Monitor your fuel supply, running out of propane halfway through the smoking
process isn’t fun. Consider purchasing a spare propane tank as a backup.
Here’s a list of the most popular smoking woods and a little information about
each.
Type of Wood | Suggested Food | Comments |
---|---|---|
Apple | All meats | Mild and sweet flavor with a slight hint of fruity flavor. |
Each
species of Applewood should offer a slightly different
flavor. Apple smoke produces an attractive browning effect.
Almond| All meats| Produces a sweet smoke with a natural nutty flavor.
Ash| Fish and red meat| Very light flavor.
Citrus| Pork and chicken| Lemon and orange wood produce a light but fruity
flavor.
Cherry| Pork and beef| Light and fruity flavor.
Fruitwood| Pork. poultry and fish| Wood such as Peach. Pear and Plum produce a
mild but
sweet smoke with a hint of fruity flavor.
Grapevine| Poultry, game, and lamb| Grapevine wood produces a lot of smoke. A
little wood
goes a long way. It produces a tart flavor that has a hint of
fruit.
Hickory| Pork and beef| Hickory is arguably the favorite wood for smoking.
Hickory
produces a very strong flavor so we recommend starting
slow with this wood.
Maple| Pork and poultry| Light and sweet
Mesquite| Beef, chicken and fish| This wood bums very hot so be aware. Much
like Hickory.
Mesquite is very popular and produces a strong flavor.
Oak| Red meats. game. ribs
and fish| Another wood that produces a heavy smoke. Start slow
with this wood.
Pecan| Ribs and red meat| Produces a light smoke that offers a sweet and nutty
flavor.
SUGGESTED SMOKING AND MEAT TEMPERATURES
Smoking Temperatures
Accurate smoking temperatures are critical for safely cooking food when meat
probes are not available. Please understand that using the factory-installed
temperature gauge is an acceptable tool for smoking food, but it’s not always
the ideal means of measuring the most accurate smoking temperature because
internal smoker temperatures can vary between the top and bottom cooking
grates. Also, keep in mind that the probes used on most gauges are designed to
measure the temperature at the tip of the temperature probe and not the
overall temperature of the smoker.
Alternatively, it is recommended that users either purchase an aftermarket,
oven-ready temperature gauge or a meat thermometer. Meat thermometers are the
most effective way of determining when the food is cooked to the minimum
temperature required for safe consumption. Please refer to the chart below for
cooking temps.
SUGGESTED SMOKING TEMPERATURES
| Suggested Smoking Temperatures| Safe Minimum Food Temperatures
---|---|---
Meat, Poultry, Fish
Beef, veal, and lamb (pieces and whole cuts)
Medium-rare| 225° F (107.2° C)| 145° F (63° C)
Medium| 225° F (107.2° C)| 160° F (71° C)
Well done| 225° F (107.2° C)| 170° F (77° C)
Pork (ham, pork loin, ribs)
Pork (pieces and whole cuts)| 225 – 240° F
(107.2 – 115.6° C)| 145° F (63° C)
Ground meat and meat mixtures (burgers, sausages, meatballs, meatloaf,
casseroles and mechanically tenderized beef)
Beef, veal (including mechanically tenderized), lamb and pork| 250 – 275° F
(121 – 135° C)| 160°F (71° C)
Poultry (chicken & turkey)| -250 275° F
(121 -135° C)| 165°F (74° C)
Poultry (chicken, turkey, duck)
Pieces| 250° F (121° C)| 165° F (74° C)
Whole| 250° F (121° C)| 165° F (74° C)
Seafood
Fish| 225 – 240° F
(107.2 – 115.6° C)| 145° F (63° C)
Shellfish (shrimp, lobster, crab, scallops, clams, mussels, and oysters)| 225
– 240° F
(107.2 – 115.6° C)| 145° F (63° C)
Since it is difficult to use a food thermometer to check the temperature of
shellfish, discard any that do not open when cooked.
| Suggested Smoking Temperatures| Safe Minimum Food Temperatures
---|---|---
Game
Chops, steaks and roasts (deer, elk, moose, caribou/reindeer, antelope, and
pronghorn)
Medium-rare| 225° F (107.2° C)| 145° F (63° C)
Medium| 225° F (107.2° C)| 160° F (71° C)
Well done| 225° F (107.2° C)| 170° F (77° C)
Large Game
Bear, bison, musk ox
walrus, etc.| 250 – 300° F
(121 – 149° C)| 145° F (63° C)
Small game
Rabbit, muskrat,
beaver, etc.| 225 – 240° F
(107.2 – 115.6° C)| 160°F (71° C)
Ground Meat
Ground meat and
meat mixtures| 250 – 300° F
(121 – 149° C)| 165° F (74° C)
Ground venison
and sausage| 250 – 300° F
(121 – 149° C)| 165° F (74° C)
Game birds/waterfowl(wild turkey, duck, goose, partridge and pheasant)
Whole| 250° F (121° C)| 180°F (82° C)
Breasts and roasts| 250° F (121° C)| 165° F (74° C)
Thighs, wings| 250° F (121° C)| 165° F (74° C)
Stuffing (cooked alone or in a bird)| 250° F (121° C)| 165° F (74° C)
LIGHTING INSTRUCTIONS
Warning: Always light your smoker with both doors open.
CAUTION: If the flame extinguishes accidentally during ignition or
operation, immediately TURN OFF the cylinder valve and then TURN OFF the
control knob.
Igniter Lighting System
- Check all connections for leaks using the “soap water” test as explained on page 16 for “checking for leaks.”
- Open both of the smoker cabinet doors. Always keep the doors open during lighting.
- Check for any blockage to each venturi tube or burner, damper setting, and ventilation setting. Remove any foreign objects or matter.
- Be sure the burner control knobs are in the “OFF” O position.
- Open the LP cylinder valve by turning counterclockwise .
- Push the igniter on the control unit down 3 to 4 seconds while turning the left control knob to “HIGH” . Once the burner is lit, repeat this step for the burner on the right.
- If ignition does not take place within 5 seconds, immediately turn both control knobs to “OFF” O. Wait 5 minutes and repeat above steps 6 and 7.
- If the burner still fails to light, try match lighting using the instructions on page 21.
- Once the burners are lit, close the doors to allow heat to accumulate. The smoke stack on the top of the smoker can be adjusted to the desired setting to allow proper ventilation and combustion. NEVER CLOSE THE SMOKE STACK COMPLETELY.
Match Lighting Procedure
Check that both control knobs are turned to the “OFF” O position before
beginning the match light procedure.
Warning: Always light your smoker with both doors open.
-
Repeat steps 1 through 5 of the igniter lighting system (PAGE 20).
-
Open both doors. Place a lit match onto the left burner as shown below.
Quickly turn the left control knob to the “HIGH” position. If the burner does not light in 5 seconds, turn the control knob “OFF” O, wait at least 5 minutes and for the gas to clear. Repeat the process. -
Once the left burner is lit, repeat step 2 for the burner on the right.
Cooking Tip: Damper Adjustments
WARNING: The dampers on the smoker’s body and the handle on the top
damper housing may become very hot while cooking. Always wear a heat-resistant
glove when adjusting.
- For best performance, rotate the smoker before lighting so that the front or back of the body is facing the wind. This allows the adjustment of the dampers to be more effective and accurate.
- The two dampers on the smoker’s body should never be fully closed.
- Opening the damper on the smokestack helps to exhaust both the heat and smoke.
- The key to effective smoking is to watch your heat indicator on the door and adjust the dampers accordingly.
- Temperature maintenance is best controlled by different damper adjustment configurations.
Turning off the Smoker
CAUTION: The smoker can become very hot while in use.
Do not touch any portion of the smoker except for the door handle and burner
control knob.
It may be necessary to use protective gloves.
- Turn all the burner control knobs off by pushing in and rotating to “OFF” O. Both burner flames should go out.
- Turn off the LP cylinder valve by turning the knob clockwise until it cannot go any farther.
- Disconnect gas cylinder when not in use. Hang regulator on lifting handle (B).
Follow all warnings and safety precautions before removing meat from the smoker or preparing the unit for storage. Please see page 23 for proper storage procedures and the important warnings and safeguards on pages 3-6.
CARE AND MAINTENANCE
AFTER USE SAFETY AND MAINTENANCE
WARNING
-
Use caution when lifting and moving the smoker to avoid strain injuries.
Two people are recommended to lift or move the smoker. -
DO NOT store or use the smoker near gasoline or other combustible liquids or where flammable vapors or liquids may be present. Keep the area around the smoker clean and free of combustible materials and vapors.
-
DO NOT store this smoker in an area accessible to children or pets. Store the smoker in a dry, protected location. Disconnect the cylinder from the smoker.
-
DO NOT allow anyone to conduct activities around the smoker following use until it has cooled. It is hot during operation and remains hot for a period of time following use.
-
DO NOT leave hot ashes unattended until the smoker cools completely.
-
The smoker becomes extremely hot – allow the smoker to cool completely before handling. If you must handle the smoker while it is hot, ALWAYS wear protective oven mitts or heat-resistant gloves. Allow the smoker to cool before removing and cleaning the greased pan.
-
Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and putting them in a noncombustible container.
-
If you must dispose of the ashes in less time than it takes for them to completely cool. Remove the ashes from the smoker, keeping them in heavy-duty foil, and soak them completely with water before disposing of them in a noncombustible container.
GENERAL CARE AND MAINTENANCE
CAUTION: All care and maintenance procedures are to be performed while
the smoker is turned off and cooled. Always perform maintenance by a qualified
service person.
Clean the water bowl and cooking grate with hot, soapy water. Rinse and dry
thoroughly. You may prefer to coat the water bowl and cooking grid lightly
with cooking oil or cooking spray.
Frequently check and clean the venturi and burner tubes for insects and insect
nests. A clogged tube can lead to fire beneath the smoker. Also make sure the
smoker does not have any foreign objects obstructing the flow of combustion
and ventilation air.
To clean the inside and outside of the smoker cabinet, simply use a damp
cloth. Spray-washing with a water hose is not recommended. Moisture should be
wiped away and not allowed to stand inside or on top of the smoker. Once
cleaned, you may prefer to lightly coat the interior of the smoker cabinet
with cooking oil or cooking spray.
If rust is present on the exterior surface of the smoker, clean the area with
steel wool or emery cloth and use heavy-duty, heat-resistant paint.
NEVER apply additional paint to the interior of the smoker. If rust is present
on the interior of the smoker, clean it thoroughly with steel wool or emery
cloth and lightly coat the area with cooking oil or cooking spray to help
minimize recurring rust.
When an LP tank is not connected, and to help prevent dirt or other foreign
particles from clogging the regulator connector, hang the end of the hose and
regulator assembly on the lifting handle (B).
Keep the ventilation opening(s) of the cylinder enclosure free and clear from
debris.
Inspect the flames at the burner by looking through the observing hole on the left side of the Burner and control unit “H”. A good flame should be blue with a yellow tip 1 to 2 in. high. If flames are excessively yellow and irregular, oil residue and food deposits may be collected on the burner. Try cleaning the burner surface with hot, soapy water and cleaning the holes with a pipe cleaner to improve the flames.
Bad flames may also be caused by poor venturi attachment to the orifice. Turn off the control knob and cylinder valve, and always let the smoker cool before cleaning or checking the assembly. Make sure the orifice of the control valve properly mates with the burner mixing tube by visual observation from the bottom of the appliance. The burner venturi tube should overlap the orifice and they should form a straight line as shown in Figure A. Figures B & C show incorrect alignment.
WARNING: I f the instructions above are not followed, an explosion may
result, possibly causing serious bodily injury or death.
To protect your smoker from weather conditions, always keep it covered while
not in use. To obtain replacement parts or accessories, call
1-877-447-4768.
TROUBLESHOOTING
If you have any questions regarding the product, please call customer service at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday.
PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
---|---|---|
The burner will not light using the igniter procedure. | 1. The igniter |
electrode may be covered with grease or residue.
2. The igniter electrode may have a loose or disconnected wire.
3.No spark is being generated.
4.No gas flow or cylinder valve not open.
5. Vapor lock at coupling nut to LP cylinder.| 1. Clean the igniter
electrode.
2. Check the connection and reconnect any loose or disconnected wires.
3. Replace the AAA-size battery inside the igniter.
4. Make sure the LP cylinder is not empty or open the cylinder valve.
5. Turn off the knob and LP cylinder valve. Disconnect coupling nut from LP
cylinder. Reconnect and retry.
The bumper will not light with a match.| 1. No gas flow or an obstructed gas
flow.| 1. Check the fuel level. Clean the venturi tube and burner.
The flame goes out.| 1. Disconnected gas supply hose.
2. High or gusting winds.| 1. Reconnect the gas supply hose.
2. Move the grill out of the windy area.
Flare-up.| 1. Excessive cooking temperatures.
2. Grease and residue build-up.
3. Excessive fat in the meat.
4. Excessive oil in the marinade.| 1. Reduce the flame level.
2. Clean the components.
3. Trim fat from the meat before cooking.
4. Use a non-oil-based marinade.
Yellow sooty flame.| 1. Excessive cooking temperature.
2. Obstruction of gas flow.
3. Ventilation closed. Damper closed.| 1. Reduce the flame level.
2. Check and clean the venturi tube and burner.
3. Adjust ventilation and damper accordingly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>