iGear iG-1073 Bright Light Light Therapy Lamp User Manual

iG-1073 Bright Light Light Therapy Lamp
User Manual

Read All Instructions Before Using

Important Safeguards

Danger:
To avoid electrocution, do not operate this device near water.
Warning:

• Close supervision is recommended when these lamps are used by or near children, or others who may not understand the need for these precautions.
• Do not operate lamps in close proximity to flammable or combustible vapors, such as aerosol spray products, or where oxygen is being administered.
• To prevent the risk of shock or personal injury when cleaning the lamp, make sure you have turned off and unplugged the lamp and allowed sufficient time for the lamp to cool.
• Do not shorten or cut the power cord.
• Certain medications(e.g., anti-depressants) and diagnosed mental health conditions may induce light sensitivity, which may result in discomfort, hyperactivity, or hypomania. Consult with your health care provider before using this product.
• If you have a pre-existing eye condition or are at risk of developing age-related macular degeneration or other eye-related conditions,it is recommended that you consult with your healthcare provider before using this product.
• Some people experience light sensitivity to bright strong light or upon over-exposure to bright strong light. Discontinue use immediately if you experience any discomfort.

Caution:

• This product is intended for indoor use only.
• Avoid placing this product in areas that are exposed to direct sunlight or in close proximity to heat-radiating products. Do not place this product on the top of other appliances which radiate heat. Protect the power cord of this product,in all of its parts from being damaged in any way.

Features

• UV free
• Color temperature step-less adjustable
• Color temperature selected:3000k-6500k
• Angel adjustable by Plastic stand accessory
• Helpful for concentration
• Relieves winter depression
• Small size and portable with touch-operated switches.

Benifits

The lamp provides a broad spectrum of strong light, which stimulates all of the eye’s Photoreceptors: Cones, rods, and melanopsin. The lamp operates with photopic light which primarily stimulates the cones of the eye as well as scotopic light, which in turn primarily stimulates the rods. Reducing the size of the pupil, this product relaxes the eye, providing a comfortable sensation of rest. Melanopsin helps set the body’s daily cycles and bring them back in their natural order, being triggered by the full spectrum light.

Device Pretest

To help determine if you have sensitivity to light , we recommend that you perform this pretest before using the product:
Step1- Turn on the lamp and position it about 18 inches from your face (do not look directly into the lamp).
Step2- Operate the lamp for approximately 10 minutes and turn it off. If the light has caused any discomfort, stop using it and consult a doctor immediately. If you have not experienced any discomfort, you may consider gradually decreasing the distance from the lamp while also increasing the use time.This will result in more light intensity and a greater effect. For your initial sessions, you should monitor the degree of any discomfort and accordingly adjust both the time you use the product for and its location and proximity.

Operation

1. Instructions for use:
   The use of this product consists of sitting close to the daylight lamp with your eyes open. While staying oriented toward the light, feel free to engage in other activities such as reading, writing, hobbies, and crafts, sewing, applying make-up, or working on your computer or desk.

• Plug the USB cable (Type C connector)into the left connector of the lamp, and then connect the AC / DC adapter to the AC socket.
• Touch the timer button to start it， Touch the dimmer button and hold on for 2 seconds so the lamp can be turned off.
• The lamp should be positioned as close as 4 inches, but within 24 inches of your face and should be slightly off-center (see diagram).
• consider using the lamp on the high setting in the morning and on the low setting in the afternoon.
  Note: Do not look directly into the lamp.

2. Light Intensity, Color Temperature, and Timer Setting
To choose your light intensity:
Hold down the switch until achieving your desired light level from 2000 to 10000 lux (4in/10cm distance).
To choose color temperature:
Hold down the  switch until achieving your desired color temperature, from 3000k-6500k, warm light to white light.
To select a time, Tap the switch to select times 15min,30min,45min, and 60min.
Note : The Light will stay on all the time if you do not tap the timer switch.

Recommended Program

Researchers at the National Institute of Health demonstrated that white light,in a range of 2,500 to 10,000 LUX (a measurement of light intensity), helped to reverse the symptoms of Winter Blues.
Exposure affects people differently. We all have different reactions to our environment. It is important to establish a distance and schedule that is comfortable for you. We recommend you use the light regularly and at about the same time each day.
It is not necessary to sit in front of the lamp continuously. you can divide the time into several mini-sessions. Continue to use the lamp daily to feel an improvement in your mood and activity level.
When you are feeling sluggish and lethargic, spend more time with the light, sit closer to it or increase light intensity. If you feel a sort of edginess, as though you have consumed too much coffee, it may be time to turn off the unit or reduce the intensity of the light.

Care and Cleaning

Your product is made from high-quality materials that will last for many years with minimum care. you may want to periodically clean the lamp using a mild non-abrasive cleaner and a soft cloth. When cleaning, always make sure you have turned off and unplugged the unit and allowed sufficient time for the unit to cool.
WARNING: To prevent the risk of shock or any personal injury when cleaning your product, always make sure you have turned it off, unplugged it from the power sources, and allowed sufficient time for the product to cool down.
CAUTION: Clean only with a soft dry cloth – do not use solvents or cleaners containing abrasives or ammonia.
After cleaning this product, all moisture should be properly wiped away and dried completely before it is connected to the power supply.

Trouble Shooting

• Make sure all power connectors, cords, and plugs are inserted fully and securely.
• Make sure there is the power to the wall outlet, or try another outlet-one that is not connected to a dimmer.

Technical Specifications

Imported and Marketed By:
iGear Tech Pvt. Ltd.
204, Sai Corporate Park,
Laxmi Nagar, Off Link Road,
Goregaon West, Mumbai – 400104.
In case of consumer complaints:
Toll-free number – 1800 22 8495
Email: sales@igear.asia
(Between 10 am to 5 pm, Mon- Fri)
Name of Commodity: Bright Light
Month and Year of Import: August 2021
Net Weight: 650 gms
Net Quantity: 1 unit
Dimensions: 160mmx140mmx10mm
Voltage: 110-240V
Colour Temperature: 3000k – 6500K
Warranty Period: 1 Year

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>