SONOFF S26 WiFi Smart Socket Wireless Plug Power Switch User Manual

User manual V1.0

Operating Instruction

1. Download APP

http://app.coolkit.cc/dl.html

2. Power on

After powering on, the device will enter the quick pairing mode (Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash
and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the manual button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
3. Add the device

Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.

Compatible Pairing Mode

If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to pair.

1. Long press pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. Long press pairing button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing Mode.
2. Tap “+” and select “ Compatible Pairing Mode ” on APP. Select Wi-Fi SSID with ITEAD-** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.

Specifications

Model| S26R2TPF/S26R2TPG/S26R2TPI/S26R2TPN//S26R2TPH S26R2TPE/S26R2TPB/S26R2TPAI/S26R2TPJ/S26R2TPL
---|---
Input| S26R2TPF: 250V-, 50/60Hz S26R2TPG: 250V-, 50/60Hz S26R2TPI: 250V-, 50Hz S26R2TPN: 250V-, 50/60Hz S26R2TPH: 250V-, 50/60Hz| S26R2TPE: 250V-, 50/60Hz S26R2TPB: 120V-, 60Hz S26R2TPAI: 250V-, 50/60Hz
S26R2TPJ: 250V-, 50/60Hz S26R2TPL: 250V-, 50/60Hz
Max. load| S26R2TPF: 4000W/16A S26R2TPG: 3250W/13A S26R2TPI: 3750W/15A S26R2TPN: 4000W/16A S26R2TPH: 4000W/16A| S26R2TPE: 3680W/16A S26R2TPB: 1800W/15A S26R2TPAI: 4000W/16A S26R2TPJ: 4000W/16A S26R2TPL: 1500W/6A
Operating systems| Android & iOS
Wi-Fi| IEEE 802.11 b/g/n 2.4GHz
Working temperature| -10°C-40°C
Material| PC VO
Dimension| 97.5x56x35mm

Product Introduction

Wi-Fi LED indicator status instruction

Features

Remotely turn on/off the device, schedule it on/off or share it with your family to control together.

Switch Network

If you need to change the network, long press the pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, then
the device enters quick pairing mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to factory setting.

Common Problems

Q: Why my device stays “Offline”?
A: The newly added device needs 1 – 2mins to connect Wi-Fi and network. If it stays offline for a long time, please judge these problems by the blue Wi-Fi indicator status:

1. The blue Wi-Fi indicator quickly flashes once per 2 seconds, which means that the device failed to connect your Wi-Fi:
   ① Maybe you have entered a wrong Wi-Fi password.
   ② Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.
   ③ The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
   ④ Maybe the MAC address filtering is open. Please turn it off.
   If none of the above methods solved the problem, you can open the mobile data network on your phone to create a Wi-Fi hotspot, then add the device again.

2. Blue indicator quickly flashes twice per 2 seconds, which means the device has connected to Wi-Fi but failed to connect to the server.
   Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If the network is normal, try to turn off the power and restart the device.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S26R2TPF/S26R2TPE/S26R2TPG/S26R2TPB/S26R2TPI/S26R2TPAI/S26R2TPN/
S26R2TPJ/S26R2TPH/S26R2TPL is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
https://sonoff.tech/usermanuals

Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000 Website: sonoff.tech
MADE IN CHINA

Documents / Resources

| SONOFF S26 WiFi Smart Socket Wireless Plug Power Switch [pdf] User Manual
S26, WiFi Smart Socket Wireless Plug Power Switch
---|---
| SONOFF S26 WiFi Smart Socket Wireless Plug Power Switch [pdf] User Guide
S26, S26 WiFi Smart Socket Wireless Plug Power Switch, WiFi Smart Socket Wireless Plug Power Switch, Smart Socket Wireless Plug Power Switch, Socket Wireless Plug Power Switch, Wireless Plug Power Switch, Plug Power Switch, Power Switch, Switch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>