SANlight EVO 5-120 320W LED Grow Light Owner’s Manual
- June 3, 2024
- sanlight
Table of Contents
Operating Instructions SANlight M-Dimmer
Read before commissioning
EVO 5-120 320W LED Grow Light
By purchasing the SANlight M-Dimmer, you have decided on an optimal addition to your EVO-series LED light, which will give you great pleasure. Please read these operating instructions carefully before connecting or starting up the M-Dimmer. Improper use can damage the light or cause harm to people/animals/plants. If the M-Dimmer is not used properly, all warranty claims and the manufacturer‘s product liability expire.
The scope of delivery includes:
1 x M-Dimmer
1 x Magnetic clip
ATTENTION: only for LED lights of the EVO-series
This M-Dimmer is only suitable for operation on the following with the EVO-
series models: EVO 3-60, EVO 3-80, EVO 3-100, EVO 4-80, EVO 4-100, EVO 4-120,
EVO 5-100, EVO 5-120, EVO 5-150.
Never connect to lights with daisy chain output! Never connect to other cables/distributors.
Commissioning
The M-Dimmer connection is color coded. Connect the M-Dimmer (blue socket)
with the blue three-pin socket of the LED light.
Note: since the M-Dimmer can be set using a magnet, there should be no
external magnetic fields in its vicinity.
A minimum distance to main cables of 30 cm is recommended. The M-Dimmer is
supplied by the LED light and is only active if the LED light is also switched
on.
2 different functions of the M-Dimmer can be set with the magnetic clip. To do
this, hold the respective side of the clip approximately to the middle of the
dimmer.
Dimmer temperature range: 0 – 70°C Supply +12V DC via LED light, max. 20mA,
never connect to 230V AC.
To dim (white side to the dimmer)
4 different power levels (100%, 80%, 60% and 40% of the nominal power of the light) can be set; the currently set power is displayed via 3 green LEDs:
| Green LEDs | Status | Output |
|---|---|---|
| 3 x constantly on | 100% | |
| 2 x constantly on | 80% | |
| 1 x constantly on | 60% | |
| All off | 40% |
Fade in active (black side to the dimmer)
The output of the LED light is slowly increased when switched on. The lamp goes from 10% to 100% power or the respectively set DIM value in about 5 minutes (e.g. to 80% in about 4 minutes, to 60% in 3 minutes, etc.)
| Orange LEDs | Status | Function |
|---|---|---|
| Flashing | Fade-in activated, power is slowly increased | |
| Constantly on | Fade in turned on but not active | |
| Constantly off | Fade in disabled |
Attention Magnetic Field: although the magnetic field of the magnetic clip is relatively weak, it can disturb or damage sensitive devices, e.g. the magnetic strip on credit cards. The magnetic clip contains an extremely robust ferrite magnet. It is insensitive to high temperatures.
www.sanlight.com
support@sanlight.com
sunlight GmbH
Klarenbrunnstraße 46
6700 Bludenz
Austria
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>