imerpii RR FIERRO SmartWatch for Children with Locator Instruction manual

imerpii RR FIERRO SmartWatch for Children with Locator

Please read this quick start user guide carefully before using.
The illustration in this quick start user guide is for reference only, please refer to the actual product.

Product parameters

• GSM: 850/900/1800/1900MHz
• GPRS: Class12
• MHz/L1,1575.42MHz CIA code
• GPS watch /GPS positioning
• accuracy: 5-15 meters
• Base station location accuracy: 100 ~ 1000 meters
• GPS channel number: 22 channel

Content in Box

• The watch x1
• USB charging line xl
• The instructions xl
• input voltage/ electric current: 5V-0.35A

Preparation before use

1. Check all the accessories if they are complete.
2. Choose the SIM card which match to the GSM network, you can refer to opinions of the dealer. (Power off before you insert the SIM card).
3. The SIM card need to open the GPRS function and call screening function.
4. Install the APP on the phone, you can ask the dealer if you don’t know how to download it.
5. The bar code and QR code is used to registered users.

Product function

• GPS + WIFI + GPRs + AGPS + five kinds of location way
• You can control it via mobile client. GPRS real-time positioning, tracking, monitoring
• Phone book
• Talkback
• Health
• Footmark
• Alarm clock
• Electronic fence
• SOS for help
• Warning if watch was taken down
• Warning if low power
• Remote Power Off
• Touch to add the friends (only some models and function is optional).

The illustration In this quick start user guide Is for reference
only. Please refer to the actual product.

The display and instruction

1. The main interface:
   The menu shows in order GSM signal, Ringing mode, Networking icon, location icon, voice icon( did not show in the picture), light sensitive icon, Battery Icon, the below is time and date.
   

2. The phone book:
   Enter the phone book, you can see the ten number which you setting in the APP, and click the number for dialing.
   

3. Voice chatting:
   Enter the menu you can send the voice message to the APP.
   

4. In the voice recording Interface:
   long push for recording, and release for sending.
   

5. Touch to add friends:
   Two watches can add friends by touching. And can connect by voice recording to send. And you can delete the friend from the APP.
   

6. Pedometer.
   The pedometer default closed, you need start it from the APP, the watch will count the step automatic when the pedometer is begin, you can click the menu and see the steps after it had record.
   

7. APP download:
   Use the phone to scan the QR code for download  APP.
   

Mobile client operate Instructions.

APP register.;

Register first before login to your account .You can get your register ID on the back of the watch and Input the ID on APP, and the ID of the user name is not less than four characters (letters or Numbers).ID and user name is the only that can’t be repeat, other information can be Input casually. And the password can be modified. The registration screen as below:

Login:
APP Functional menu interface
Enter the correct account and password In the APP Interface
and click login, then you can enter the main interface. The
picture is shown as Below:

Function description:

Intercom:
watches and app voice dialogue. Mobile phone can also send text to watches, the text can be read in watches directly.
App sends the voice: after start the recording, APP starts recording. then sent it to watch. The longest speech is for 15 seconds. Press the SOS key to play the tape.

Watch recording:
Press the power button for 3 seconds to start recording, then sent the tape after loosen the watch, the longest recording is for 15 seconds. APP receive voice prompt information (The time of receiving voice is related to network status).

Map:
Check the position of the watch at any time The interface of map can display the location of the watch and mobile phone APP. Click on “localization” watch then start real-time positioning for 3 minutes, upload interval is 10 seconds and restore to the default operating mode after 3 minutes.

Setting:
set all the parameters of the watch.

1. Set SOS number:
   After connection with your mobile phone, you could choose 3 numbers in your phonebook to save as emergency contact persons. In emergency, you can long press the SOS key for 3 seconds to alarm. If the call is answered, ii won’t dial any more, or it will keep dialing until the second round finished.

2. Listening:
   General settings for the parent number, watch dial the number be set initiatively after determine, Watch can’t hear the sound of the phone, Mobile phones can listening watch.

3. Don’t disturb period:
   The three period of watches to block all calls.

4. SMS alerts Settings:
   Low power, SOS, Remove the watch . Three alarm message switch.

5. Baby contacts:
   You can set a contacts list included 10 person.

6. The phone book:
   The watch can be set 10 phone numbers, and these 10 phone numbers can dial the watch with each other, is a two-way conversation.

7. Restore the default work mode:
   The default work mode: open the GPS 24 hours per day, upload interval of 10 minutes.

8. Remote power off:
   The watch can’t power off by the power off key when it is starting up and normal working.

9. Touch to add the friends: Add or delete friends.

Electronic fence:
fence minimum radius is 500 meters, it will produce the alarm of the fence when a user walk outside of the fence.

Love reward:
Select the number of hearts on the a pp and click the determine key, then the information will be sent to watch. And the screen will show love hearts and number.

Watch alarm:
can Installed three alarm clock, alarm clock can be set according to their own requirements.

Looking for watch:
You can send this instruction when your watch lost the watch will ring the bell for a minute, then you can look for your watch, and you can press any key to stop ringing the bell.

Attention: You can find the ID number in the equipment lise, if this ID do not match the ID sticked on the watch, the watch will not be able to link the APP.
“Help” documentation for all functions are made more detailed instructions, you can go into the instructions carefully.

Watch alarm instructions
Once device receive any alarm, alarm notice will be sent to the client, click to the notice, the client will see the list of alarm details and view them.

Watch working mode functions

Three basic working mode: The normal mode, the power saving mode and the following mode. The work upload Interval of three patterns are different.
Normal mode: upload interval is 600 seconds
Power saving mode: upload interval is 3600 seconds
Following mode: upload interval ls 60 seconds

Device related instructions

SOS emergency alarm:
Press the SOS button for 3 seconds, the terminal screen SOS, the terminal will into alarm state, it will dial three SOS number for two rounds.
If the call is answered, it won’t dial any more. Or it will keep dialing until the second round finished. And at the same time it will send a alarm notification to the APP.

Warning for taking down the watch:
The terminal strap is equipped with the sensor switch, you should wear the watch for at least 3 minutes, then it will alarm if the strap was taken off, and terminal will send a alarm message to the center number (The default setting Is off), and send a alarm notification to the APP.

Low power alarm:
If the power percentage is less than 20%, it will alarm, and terminal will send a alarm message to the center number. At the same time it will send a alarm notification to the APP.

Health:

1. Smart pedometer
   A vibration sensor mounted on the device, when the client are doing healthy exercise, and reach a moving limit, smart pedometer application program will begin. Client could know their movement through the APP.

2. Sleep Management
   Based on the upturned frequency of the device, the device can determine whether a reasonable night sleep of the client. The default detection time for 10:00 p.m. to 7:00 a.m. of the following day. Data could be viewed on the APP.

3. Physical activity
   Calculating according to the steps, step and weight, and the interval and weight can be set up.

4. Sports journey
   According to the result of step and step distance calculation, the interval can be set up.

Talkback:
Press the power button for 3 seconds to start recording, after releasing the power button to send the tape to the APP. Watch received pronunciation, the screen will have phonetic symbol, short press the SOS button play the tape, then all the voice broadcast marks will disappear.

Remote monitoring
Firstly, you need set tutelar number, and send opening voice monitoring Instructions to device, then device will dial to the tutelar number, tum to auto answer state. And for one-way conversation, device can’t hear voice of the other side.

Tum off :

1. Remove SIM card then click turn off button.
2. APK remote control to power off.

The family dialing
You can set 3 family numbers on the APP, button 1 is family number one, button 2 is family number two, long press the button will dial the number directly, family number 3 is a alternate number, when you press SOS button, it will call N0.1 directly, if there is no answer, it will call N0.2 and then N0.3 automatically.

The address book:
App can be set 10 Numbers, these Numbers can dial telephone to the watch, and realize the double talk.

Take on and shut off phone:
When call coming, press button 3 can take on phone, pressing power button can shut down phone.

Touch to add the friends:
Two watches can add friends by touching. And can connect by voice recording to send.

Trouble diagnoses

Device can’t connect to server at the first time and the backend show off line. Please check below:

1. Check if you have put the SIM card correct, and the screen display is normal, please refer to the picture instruction.
2. If your SIM card is out of service, please check if you have open the GPRS service.
3.  Whether GPRS service was canceled
4. Check whether the parameters of service is right from the supplier, and then set It right.

The instruction for put in the SIM card

1. Open the dust plug, you will seethe SIM card slot as the picture as below.

2. Prepare the standard Micro-SIM card, Insert the SIM card, the direction is as the picture 2.
   

3. Push the SIM card into the card slot as the picture 3. And close the dust plug.

QR code scanning entrance

Android and IOS can all scan it after entering it you could choose android or IOS APP (QQ scan).

Technical Service
Visit: http://www.imperiielectronics.com/contactus

imerpii RR FIERRO SmartWatch for Children with Locator Instruction manual – Download [optimized]
imerpii RR FIERRO SmartWatch for Children with Locator Instruction manual – Download
imerpii RR FIERRO SmartWatch for Children with Locator Instruction manual – OCR PDF

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>