QUIO QU-ER-80-4 Chip Card Reader User Guide

Table of Contents

The QR Code Reader is a device that allows you to read QR codes. It has various features and settings that can be configured according to your needs.

Function Parameter Specification

Network Parameter: This includes the network settings of the QR Code Reader. You can configure relevant parameters such as IP address, HTTP address, and sever port.
Format Parameter Setting: This allows you to select the output format for the QR code reader, such as USB virtual keyboard, USB virtual serial port, HTTP, MQTT, RS232, WG26, WG34, RS485, and access control system output.
External Parameter: This includes settings for rest interval, working mode (common mode, single mode, interval mode), and scan fill-in light.

Double click on the QR code Reader parameter setting page.
Use a mini USB data cable to connect the QR code reader to a PC. Make sure the fill-in light is on and the buzzer rings. This indicates that the QR code reader has started successfully. Then, use an internet cable to connect the QR code reader to the PC.
The default fixed IP for the QR code Reader is 192.168.1.99. Manually set the client PC to the same network segment as the QR code reader. Follow the instructions in the provided picture to get the QR code reader parameter via the software.
Configure the network parameters and other relevant settings according to your requirements using the software.
Set the desired output format for the QR code reader, such as USB virtual keyboard, USB virtual serial port, HTTP, MQTT, RS232, WG26, WG34, RS485, or access control system output.
Adjust the external parameters, including rest interval, working mode, and scan fill-in light settings.
Save the settings and start using the QR code reader according to your specific needs.

Double click on’ Parameter setting ere , enter OR code Reader parameter setting page,
Use mini USB data cable connect the QR code reader to PC, fill in light on, buzzer rings, QR code reader start done, then use the internet cable connect the QR code Reader to PC.
QR code Reader default fixed IP is 192.168.1.99, client PC manual setting the same network segment with the QR code Reader, follow the operation as below Picture, can get the QR code reader parameter via the software

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-3

network parameter

Mainly include network parameter of the QR code Reader, configure relevant parameter, click setting can done setting.

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-4

Internet mode: default fixed IP:192.168.1.99 mode, can select auto obtain mode
【HTTP address】 HTTP output mode need use domain name address
【HTTP sever port】 HTT Poutput mode need use sever port；
【Docking services Voice 】 HTTP output mode sever docking interface language PHP、 JSP、C#、ASP option）

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-5

【output format selection USB Virtual keyboard USB virtual serial port HTTP、MQTT、 RS232、WG26、WG34、RS485、access control system output( not enabled)、TCP、UDP functions
【card number output format】6H、8H、6H10D、8H10D、2H3D+4H5D option this card number format setting is invalid for QR Code
【HID format parameter】 data output if send carriage return If send line feed， this parameter setting is invalid for USB virtual serials port, carriage return only valid for USB virtual keyboard, linefeed only valid for RS232
【parameter】can adjust correspond parameter as you need, this parameter setting is invalid for USB virtual serial port, only valid for RS485, RS232
【QR code serial port output format】DEC HEX DEC Reverse Hex Reverse ASCII option，（this parameter only valid for RS485,RS232“RS485、RS232”，Hex、Hex Reverse output format is Hex card number, total bit is odd, output is ASCII，Even number, output is HEX card number）

external parameter

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-6

【rest setting】0 for not reset，12hours interval、24 hours interval；
【working mode】common mode, single mode, interval mode，
Common mode：can reading QR code constantly；
single mode：the same QR code can not reading constantly； interval mode：reading the same QR code need waiting 15 seconds
【horn】 not enabled
【scan fill in light】 turn on and off for camera fill in light

bar code, QR code setting

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-7

setting QR code prefix and suffix, add the correspond prefix and suffix to QR code
【prefix and suffix input format】 ASCII、 HEX option setting the prefix and suffix format output

card number prefix suffix format

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-8

setting prefix and suffix, add the correspond prefix and suffix to card number(this paremeter only valid for RS485 、 RS232)
【prefix and suffix input format】 ASCII、 HEX option setting the prefix and suffix format output
【serial port output format】 ASCII、 HEX option setting the prefix and suffix format output

WG timing sequence defination

QUIO-QU-ER-80-4-Chip-Card-Reader-FIG-9