Sanlight EVO 3-60 EVO Series M Dimmer Instruction Manual
- October 30, 2023
- sanlight
Table of Contents
EVO 3-60 EVO Series M Dimmer
Sanlight EVO Series M-Dimmer
The SANlight M-Dimmer is an optimal addition to your EVOseries LED light, which will give you great pleasure. Please read these operating instructions carefully before connecting or starting up the M-Dimmer. Improper use can damage the light or cause harm to people/animals/plants. If the M-Dimmer is not used properly, all warranty claims and the manufacturer`s product liability expire. By purchasing the SANlight M-Dimmer, you have decided on an optimal addition to your EVO-series LED light, which will give you great pleasure. Please read these operating instructions carefully before connecting or starting up the M-Dimmer. Improper use can damage the light or cause harm to people/animals/plants. If the M-Dimmer is not used properly, all warranty claims and the manufacturer‘s product liability expire.
The scope of delivery includes
- 1 x M-Dimmer
- 1 x Magnetic clip
ATTENTION: Only for LED lights of the EVO-series. This M-Dimmer is only suitable for operation on the following with the EVO-series models: EVO 3-60, EVO 3-80,EVO 3-100, EVO 4-80, EVO 4-100, EVO 4-120, EVO 5-100, EVO 5-120, EVO 5-150.
Never connect to lights with daisy chain output! Never connect to other cables/distributors.
Commissioning
The M-Dimmer connection is colour coded. Connect the M-Dimmer (blue socket)
with the blue three-pin socket of the LED light.
Note: since the M-Dimmer can be set using a magnet, there should be no
external magnetic fields in its vicinity. A minimum distance to mains cables
of 30 cm is recommended.
The M-Dimmer is supplied by the LED light and is only active if the LED light is also switched on. 2 different functions of the M-Dimmer can be set with the magnetic clip. To do this, hold the respective side of the clip approximately to the middle of the dimmer. Dimmer temperature range: 0 – 70°C Supply +12V DC via LED light, max. 20mA, never connect to 230V AC.
To dim (white side to the dimmer)
Adjust the brightness of the LED light by sliding the white side of the dimmer
up or down. The higher you slide the white side, the brighter the light will
be.
Fade in active (black side to the dimmer)
Activate the fade-in feature by sliding the black side of the dimmer up. The
light will slowly increase in brightness over a period of 30 seconds. To
deactivate the fade-in feature, slide the black side of the dimmer down.
Attention Magnetic Field: Although the magnetic field of the magnetic clip is relatively weak, it can disturb or damage sensitive devices, e.g. the magnetic strip on credit cards. The magnetic clip contains an extremely robust ferrite magnet which isinsensitive to high temperatures.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>