BRESSER Compact Binoculars Instruction Manual

June 3, 2024
BRESSER

BRESSER LOGO

COMPACT BINOCULARSBRESSER Compact Binoculars

INSTRUCTION MANUAL.

Compact Binoculars

BRESSER Compact Binoculars - FIG 3

BRESSER Compact Binoculars - FIG 1|
---|---

COMPACT BINOCULARS

General Safety Information!

RISK of physical injury!
Never look through this device directly at or near the sun. There is a risk of BLINDING YOURSELF! Children should only use this device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children. There is a risk of SUFFOCATION.
Fire/Burning RISK!
Never subject the device – especially the lenses – to direct sunlight. Light ray concentration can cause fires and/or burns.
! RISK of material damage!
Never take the device apart. Please consult your dealer if there are any defects.
The dealer will contact our service center and send the device in for repair if needed.
Do not subject the device to temperatures exceeding 60° C

List of Parts

1. Centre axle
2a Twist-up eyecups or
2b Rubber eyecups
3. Dioptre adjustment
4. Body of the binoculars| 5. Lens tube
6. Central focusing wheel
7. Eyepiece
8. Objective lens
9. Image circle with correctly set eye distance
---|---

Eyepieces for spectacle wearers
Depending on the model, your binoculars are equipped with either twist-up eyecups (2a) or rubber eyecups (2b). Since there is a larger distance between the binocular eyepiece and the pupil for those wearing glasses, both eyecup varieties can be adjusted individually. Twist-up Eyecups (2a) Screw in the twist-up eyecups (2a) to use the binoculars while wearing glasses. If you are not wearing glasses, unscrew the eyecups to achieve the required distance from the pupils. OR Rubber Eyecups (2b) To use the binoculars while wearing glasses, turn the rubber eyecups (2b) towards the sides and down. If you are not wearing glasses, leave the eyecups in the upright position to achieve the required distance from the pupils.
Adjusting the eyepiece distance
The distance between the eyes differs between individuals. To achieve perfect interaction between your eyes and the eyepieces of your binoculars set the- gle at the center of the binoculars (1) so that you see a circular image (12). Note this setting for later use.
Adjusting the focus
Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the center wheel (6) until it is sharp and clear. Close your left eye and adjust the image for your right eye using the dioptre ring (3) until it too is sharp and clear.
TIPS on cleaning
Lenses (eyepieces and object lenses) should be cleaned with a soft, lint-free cloth (e.g. microfibre) only. Do not use excessive pressure – this may scratch the lens.
Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses.
Protect the device against dirt and dust. Leave it to dry properly after use at room temperature. Then put the dust caps on and store the device in the case provided.

 Warranty & Service

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms. Errors and technical changes are reserved.

http://tm.by
Bresser GmbH
Gutenbergstr. 2 DE-46414 Rhede Germany
www.bresser.de
service@bresser.de
Service Hotline: +49 (0) 28 72-80 74-210
Bresser France SARL 260, rue des Romarins
83170 Brignoles · France
www.bresser.fr 
info@bresser.fr

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BRESSER User Manuals

Related Manuals