beko RCNT340 60cm Refrigerator User Manual
- June 5, 2024
- Beko
Table of Contents
Refrigerator
User manual
RCNT340 RCNT375 RCNT415*
5774451030/AA
Please read this user manual first!
Dear Customer, We hope that your product, which has been produced in modern
plants and checked under the most meticulous quality control procedures, will
provide you with an effective service. Therefore, read this entire user manual
carefully before using the product and keep it as a reference. If you hand
over the product to someone else, give the user manual as well.
The user manual will help you use the product in a fast and safe way.
- Read the manual before installing and operating the product.
- Make sure you read the safety instructions.
- Keep the manual in an easily accessible place as you may need it later.
- Read the other documents given with the product.
Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful tips.
Warning against dangerous conditions for life and property.
Warning against electric voltage.
INFORMATION
| The model information is stored in the product database and can be reached by entering the following website and searching for your model identifier (*) found on the energy label.
---|---
Your Refrigerator
1. Door shelf
2. Egg section
3. Bottle shelf
4. Adjustable feet
5. Crisper
6. Chiller compartment
7. Fridge Glass Shelf
8. Fan| 9. Temperature setting button
10. Ion Guard
11. Freezer Crisper
12. Fride door shelf
13. Icebox / Ice-making
14. Air Filter
15. Freezer compartment
16. Fridge compartment
*Selected Model
---|---
Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
Important Safety Warnings
Please review the following information.
Failure to observe this information may cause injuries ior material damage. Otherwise, all warranty and reliability commitments will become invalid. The service life of your product is 10 years. During this period, original spare parts will be available to operate the product properly.
Intended use
This product is intended to be used
- indoors and in closed areas such as homes;
- in closed working environments such as stores and offices;
- in closed accommodation areas such as farmhouses, hotels, and pensions.
- It should not be used outdoors.
General safety
-
When you want to dispose of/scrap the product, we recommend you to consult the authorized service in order to learn the required information and authorized bodies.
-
Consult your authorized service for all your questions and problems related to the refrigerator. Do not intervene or let someone intervene to the refrigerator without notifying the authorized services.
-
For products with a freezer compartment;
Do not eat cone ice cream and ice cubes immediately after you take them out of the freezer compartment! (This may cause frostbite in your mouth.) -
For products with a freezer compartment;
Do not put bottled and canned liquid beverages in the freezer compartment. Otherwise, these may burst -
Do not touch frozen food by hand; it may stick to your hand. Unplug your refrigerator before cleaning or defrosting.
-
Vapor and vaporized cleaning materials should never be used in the cleaning and defrosting processes of your refrigerator. In such cases, the vapor may get in contact with the electrical parts and cause a short circuit or
-
electric shock.
-
Never use the parts on your refrigerator such as the door as a means of support or step.
-
Do not use electrical devices inside the refrigerator.
-
Do not damage the parts, where the refrigerant is circulating, with drilling or cutting that might blow out when the gas channels of the evaporator, pipe extensions or surface causes skin irritations and eye injuries.
-
Do not cover or block the ventilation holes on your refrigerator with any material.
-
Electrical devices must be repaired by only authorized persons. Repairs performed by
-
incompetent persons create a risk for the user.
-
In case of any failure or during maintenance or repair work, disconnect your refrigerator’s mains supply by either turning off the relevant fuse or unplugging your appliance.
-
Do not pull by the cable when pulling off the plug.
-
Ensure highly alcoholic beverages are stored securely with the lid fastened and placed upright.
-
Never store spray cans containing fammable and explosive substances in the refrigerator.
-
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
-
Do not operate a damaged refrigerator.
-
Consult with the service agent if you have any concerns.
-
This product is not intended to be used by persons with physical, sensory, or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or safety or who will instruct them accordingly for use of the product
-
The electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
-
Exposing the product to rain, snow, sun, and wind is dangerous with respect to electrical safety.
-
Contact authorized service when there is power cable damage to avoid danger.
-
Never plug the refrigerator into the wall outlet during installation. Otherwise, the risk of death or serious injury may arise.
-
This refrigerator is intended for only storing food items. It must not be used for any other purpose.
-
The label of technical specifications is located on the left wall inside the refrigerator.
-
Never connect your refrigerator to electricity-saving systems; they may damage the refrigerator.
-
If there is a blue light on the refrigerator, do not look at the blue light with optical tools.
For manually controlled refrigerators, wait for at least 5 minutes to start the refrigerator after power failure.
This operation manual should be handed to the new owner of the product when it is given to others. -
Avoid causing damage on the power cable when transporting the refrigerator. Bending refrigerator Bending cable may cause a fire. Never place heavy objects on the power cable.Do not touch the plug with wet hands when plugging the product
-
Do not plug the refrigerator if the wall outlet is loose.
-
Water should not be sprayed on inner or outer parts of the product for safety purposes.
-
Do not spray substances containing inflammable gases such as propane gas near the refrigerator to avoid fire and explosion risk.
-
Never place containers filled with water on top of the refrigerator; in the event of spillages, this may cause electric shock or fire.
-
Do not overload the refrigerator with food. If overloaded, the food items may fall down and hurt you and damage the refrigerator when you open the door.
-
Never place objects on top of the refrigerator; otherwise, these objects may fall down when you open or close the refrigerator’s door.
-
As they require a precise temperature, vaccines, heat-sensitive medicine and scientific materials should not be kept in the refrigerator.
-
if not to be used for a long time, refrigerators should be unplugged. A possible problem in the power cable may cause a fire.
The plug’s tip should be cleaned regularly with a dry cloth; otherwise, it may cause a fire. -
The refrigerator may move if adjustable legs are not properly secured on the floor. Properly securing adjustable legs on the floor can prevent the refrigerator to move.
When carrying the refrigerator, do not hold it from the door handle. Otherwise, it may be snapped. -
When you have to place your product next to another refrigerator or freezer, the distance between devices should be at least 8c n. Otherwise, adjacent sidewalls may be humidified.
The product shall never be used while the compartment which is located at the top or back of your product and in which electronic boards are available (electronic board box cover) (1) is open.
For products with a water dispenser
- Pressure for cold water inlet shall be maximum 90 psi (6.2 bar). if your water pressure exceeds 80 psi (5.5 bar), use a pressure limiting valve in your mains system. if you do not know how to check your water pressure ask for the help of a professional plumber.
- If there is risk of water hammer effect in your installation, always use a water hammer prevention equipment in your installation. Consult Professional plumbers is you are not sure that there is no water hammer effect in your installation.
- Do not install on the hot water inlet. Take precautions against of the risk of freezing of the hoses. Water temperature operating interval shall be 33°F (0.6°C) minimum and 100°F (38°C) maximum
- Use only potable water.
Child safety
- If the door has a lock, the key should be kept away from the reach of children.
- Children must be supervised to prevent them from tampering with the product.
Compliance with WEEE Directive and Disposing of the Waste Product:
**** This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high-quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resources by recycling used products.
For children’s safety, cut the power cable and break the locking mechanism of the door, if any, so that it will be non-functional before disposing of the product.
Package information
Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do not
dispose
of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
Do not forget
Any recycled substance is an indispensable matter for nature and our
national asset wealth. if you want to contribute to the re-evaluation of the
packaging materials you can consult your environmentalist organizations or the
municipalities where you are located.
HC warning
If your products cooling system contains R600
This gas is flammable. Therefore, pay attention to not damaging the cooling system and piping during usage and transportation. In the event of damage, keep your product away from potential fire sources that can cause the product to catch a fire and ventilate the room in which the unit is placed.
Ignore this warning If your products
The cooling system contains R134a.
The type of gas used in the product is stated on the type label which is on
the left wall inside the refrigerator. Never throw the product on fire for
disposal.
Reo3mmendadons for the fresh food compartment
- optional
Do not allow the food to touch the temperature sensor in fresh food compartment. To allow the fresh food compartment to keep its ideal storage temperature sensor must not be hindered by food.
Do not place hot foods in the product.
Things to be done for energy saving
-
Do not leave the doors of your refrigerator open for a long time.
-
Do not put hot food or drinks in your refrigerator.
-
Do not overload your refrigerator so that the air circulation inside of it is not prevented.
Do not install your refrigerator under direct sunlight or near heat-emitting appliances such as ovens, dishwashers, or radiators.
Keep your refrigerator at least 30cm away from heat emitting sources and at least 5cm from electrical ovens.
Pay attention to keeping your food in closed containers. -
For products with a freezer compartment, You can store them when you remove the shelf or drawer of the freezer.
The energy consumption value stated for your refrigerator has been determined by removing the freezer shelf or drawer and under maximum load.
There is no harm to use a shelf or drawer according to the shapes and size of the food to be frozen. the maximum amount of food items in the freezer -
Thawing frozen food in the fridge compartment will both provide energy savings and preserve the food quality.
Installation
In case the information which is given in the user manual is not taken into account, the manufacturer will not assume any liability for this.
Points to be paid attention to when the relocation of the refrigerator
- Your refrigerator should be unplugged.Before transportation of your refrigerator, it should be emptied and cleaned.
- Before it is re-packaged, shelves, accessories, crisper, etc. inside your refrigerator should be fixed with adhesive tape and secured against impacts. The package should be bound with thick tape or sound ropes and the transportation rules on the package should be strictly observed.
- Original packaging and foam materials should be kept for future transportation or moving. Before you start the refrigerator,
Check the following before you start to use
your refrigerator:
- Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
- Connect the plug of the refrigerator to the wall socket.When the fridge door is opened, the fridge’s internal lamp will turn on.
- When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
- The front edges and both sides of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.
Electrical connection
Connect your product to a grounded socket that is being protected by a fuse
with the appropriate capacity.
Important:
The connection must be in compliance with national regulations.
- The power plug must be easily accessible after installation.
- The electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
- The voltage stated on the label located on the left inner side of your product should be equal to your network voltage.
- Extension cables and multi-plugs must not be used for the connection.
A damaged power cable must be replaced by a qualified electrician.
The product must not be operated before t is repaired!
There is the risk of electric shock!
Disposing of the packaging
The packing materials may be dangerous for children. Keep the packing
materials out of the reach of children or dispose of them by classifying them
in accordance with the waste instructions stated by your local authorities. Do
not throw away with regular house waste, throw away at packaging pick-up spots
designated by the local authorities The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old refrigerator
Dispose of your old refrigerator without giving any harm to the environment.
- You may consult your authorized dealer or waste collection center of your municipality about the disposal of your refrigerator. Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.
Placing and Installation
If the entrance door of the room where the refrigerator will be installed is
not wide enough for the refrigerator to pass through, then call the authorized
service to have
them remove the doors of your refrigerator and pass it sideways through the
door.
-
Install your refrigerator to a place that allows ease of use.
-
Keep your refrigerator away from heat sources, humid places, and direct sunlight.
-
There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation.
If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance from the ceiling and at least 5 cm from the wall. Do not place your product on the materials such as rugs or carpets. -
Place your refrigerator on an even floor surface to prevent jolts.
Door Open Warning (This feature is optional)
Audio warning signal and flashing illumination will be given when the door of
your product is left open for at least 1 minute. This warning will be muted
when the door is closed or any of the display buttons (if any) are pressed.
Model | “A” | “B” | “C” | “D” | “E” |
---|---|---|---|---|---|
RCNT340 | 670 | 1720 | 600 | 1038 | 130 |
RCNT375 | 670 | 1850 | 600 | 1038 | 130 |
RCNT415 | 670 | 1720 | 700 | 1275 | 130 |
Adjusting the legs
If your refrigerator is unbalanced; You can balance your refrigerator by turning its front legs as illustrated in the figure. The corner where the leg exists is lowered when you turn in the direction of the black arrow and raised when you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will facilitate this process.
Changing the illumination lamp
To change the Bulb/LED used for the illumination of your refrigerator, call
your authorized service. The lamp(s) used in this appliance is not suitable
for household room illumination. The intended purpose of this lamp is to
assist the user to place foodstuffs in the refrigerator foodstuffs in the
refrigerator/freezer in a safe and comfortable way. The lamps used in this
appliance have to withstand extreme physical conditions such as temperatures
below -20 °C. (only chest and upright freezer)
Preparation
-
Your cooler/freezer should be installed at least 30 cm away from heat sources such as hobs, ovens, central heater,s and stoves and at least5 cm away from electrical ovens
and should not be located under direct sunlight. -
Please make sure that the interior of your cooler/freezer is cleaned thoroughly.
-
If two coolers are to be installed side by side, there should be at least 2 cm distance between them.
-
When you operate your cooler/freezer for the first time, please observe the following instructions during the initial six hours.
-
Its door should not be opened frequently.
-
It must be operated empty without placing any food in it.
-
Do not unplug your cooler/freezer. If a power failure occurs out of your control, please see the warnings in the “Recommended solutions for the problems” section.
-
The baskets/drawers that are provided with the chill compartment must always be in use for low energy consumption and for better storage conditions.
-
Food contact with the temperature sensor in the freezer compartment may increase the energy consumption of the appliance.
Thus any contact with the sensor(s) must be avoided. -
This product has been designed to function at ambient temperatures up to 43°C (90 SDgr F). Even if the ambient temperature falls to -15 °C, frozen food in the freezer does not thaw thanks to its Advanced Electronic Temperature Control System. For the first installation, the product should NOT be placed under low ambient temperatures. This is because the freezer cannot go down to standard operating temperature. When reaching continuous operation, the product can be moved to another
place. Thus, later you can place your product in the garage or an unheated room without the concern of causing frozen food to get rotten. However, it is likely that above mentioned low temperatures may cause the freezing of the food in the fridge compartment; thus, please consume the food items in the fridge in a controlled way as needed. When the ambient temperature goes back to normal, you may change the button setting according to your need. -
If the ambient temperature is below 0°C, the food in the fridge compartment will freeze. Therefore, we recommend not using the fridge compartment in such low ambient temperatures.
You may continue to use the freezer compartment as usual. -
In some models, the instrument panel automatically turns off 5 minutes after the door has closed. It will be reactivated when the door has opened or pressed on any key.
-
Due to temperature change as a result of opening/closing the product door during operation, condensation on the door/body shelves and the glass containers is normal.
Using your refrigerator
*Indicator Panel (Internal Display) Optional**
Indicator panels may vary according to the product model. Audio – visual
functions on the indicator panel help you in using your product.
Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
-
Freezer compartment indicator
The fridge compartment light is illuminated while the freezer compartment temperature is set. -
Error status indicator
If your refrigerator does not perform enough cooling or in case of a sensor fault, this indicator is activated. When this indicator is activated, “E” is displayed on the freezer compartment temperature indicator, and numbers such as “1,2,3…” are displayed on the fridge compartment temperature indicator. These numbers on the indicator
inform service personnel about the error. -
Temperature indicator
Indicates freezer, and fridge compartment temperature. -
Vacation function button
Press on Vacation Button for 3 seconds to activate this function. When the vacation function is activated, “- -” is displayed on the fridge compartment temperature indicator, and no active cooling is performed on the fridge compartment. It is not suitable to keep the food in the fridge compartment when this function is activated.
Other compartments shall be continued to be cooled as per theirset temperature. To cancel this function press the Vacation button again. -
Temperature setting button
Changes the temperature of the relevant compartment between -24°C… -18°C and 8°C…1°C. -
Compartment selection button
Selection button: Press the compartment selection button to switch between fridge and freezer compartments. -
Fridge compartment indicator
The fridge compartment light is illuminated while The fridge compartment temperature is set. -
Economy mode indicator
Indicates that the refrigerator operates in energy-saving mode. This display shall be activated if the freezer compartment temperature is set to -18°C. -
Vacation function indicator
Indicates that vacation is activated.
*Indicator Panel (Internal Display) Optional**
Indicator panels may vary according to the product model. Audiovisual
functions on the indicator panel help you in using your product.
Figures that take place in this instruction
manual are schematic and may not correspond exactly with your product. If the
subject parts are not included in the product you have purchased, then it is
valid for other models.
-
Quick Fridge button
Selection button: Press “Quick Cool”.Selection button to setting fridge compartment. -
Error status indicator
If your refrigerator does not perform enough cooling in case of a sensor fault, this indicator is activated. -
Fridge compartment selection button
This function allows you to set the temperature of the fridge compartment. Press this button to set the temperature of the fridge compartment to 8, 6, 4, and 2, respectively. -
Fridge compartment temperature indicator
The temperature of the fridge compartments 2, 4, 6, and 8. -
Quick Freezer button
Selection button Press “Quick Freeze”.Selection button to setting freezer compartment. -
Freezer compartment selection button
This function allows you to set the temperature of the freezer compartment. Press this button to set the temperature of the freezer compartment to -16, -18, -20, and -24 respectively. -
Vacation function indicator (optional)
When the vacation function light. It is not suitable to keep the food in the fridge compartment when this function is activated. -
Freezer compartment temperature indicator
The temperature of the freezer compartment is -24, -20, -18, and -16.
*Indicator panel(External display)Optional**
The indicator panel allows you to set the temperature and control the other
functions related to the product without opening the door of the product. Just
press the inscriptions on relevant buttons for function settings.
Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
-
Power failure/High temperature/error warning indicator This indicator ( ) illuminates during a power failure, high-temperature failures, and error warnings. During sustained power failures, the highest temperature that the freezer compartment reaches will flash on the digital display. After checking the food located in the freezer compartment ( ) press the alarm off button to clear the warning. Please refer to the “remedies advised for troubleshooting” section on your manual if you observe that this indicator is illuminated.
-
Energy-saving function (display off):
If the product doors are kept closed for a long time energy-saving function is automatically activated and the energy-saving symbol is illuminated. ( )When energy saving. the function is activated, and all symbols on the display other than the energy-saving symbol will turn off. When the Energy Saving function is activated, if any button is pressed or the door is opened energy-saving function will be canceled and the symbols on display will return to normal.
The energy-saving function is activated during delivery from the factory and cannot be canceled. -
Quick fridge function
The button has two functions. To activate or deactivate the quick cool function press it briefly. Quick Cool indicator will turn off and the product will return to its normal settings. ( )| Use quick cooling function when you want to quickly cool the compartment. If you want to the food placed in the fridge cool large amounts of fresh food, and activate this function before putting the food into the product.
---|---
| If you do not cancel it, quick cooling will cancel itself automatically after 1 hour or when the fridge compartment reaches the required temperature.
| If you press the quick cooling button repeatedly with short intervals, the electronic circuit protection will be
activated and the compressor will not start up immediately.
| This function is not recalled when power restores after a power failure. -
Fridge compartment temperature setting button
Press this button to set the temperature of the fridge compartment to 8, 7,6, 5,4,3, 2, 8… respectively. Press this button to set the fridge compartment temperature to the desired value. -
Vacation Function
In order to activate the vacation function, press this button for 3 seconds, and the vacation mode indicator ( ) will be activated. When the vacation function is activated, “- -” is displayed on the fridge compartment temperature indicator, and no active cooling is performed on the fridge compartment. It is not suitable to keep the food in the fridge compartment when this function is activated. Other compartments shall be continued to be cooled as per their set temperature. To cancel this function press the Vacation function button again. -
Alarm oFF warning:
In case of power failure/high-temperature alarm, after checking the food located in the freezer compartment press the alarm oFF button ( ) to clear the warning. -
Key lock
Press the key lock button ( )simultaneously for 3 seconds. Key lock symbol ( )will light up and key lock mode will be activated. Buttons will not function if the Keylock mode is active. Press the key lock button simultaneously for 3 seconds again. The key lock symbol will turn oFF and the key lock mode will be exited.
Press the Key lock button if you want to prevent changing the temperature setting of the refrigerator ( ) -
Eco fuzzy
Press and hold the eco fuzzy button for 1 second to activate the eco fuzzy function. The refrigerator will start operating in the most economic mode at least 6 hours later and the economic usage indicator will turn on when the function is active ( ). Press and hold the eco fuzzy function button for 3 seconds to deactivate the eco fuzzy function. This indicator is illuminated after 6 hours when eco fuzzy is activated. -
Freezer compartment temperature setting button
Press this button to set the temperature of the freezer compartment to-16,-17,-18,-19,-20,-22,-24,-16… respectively. Press this button to set the freezer compartment temperature to the desired value. ( ) -
Icematic function (optional)
Indicates whether the cinematic is on or oFF.( )If On, then the cinematic is not operating. To operate the schematic again press and hold the On-OFF button for 3 seconds.
| Water FLow from the water tank will stop when this function is selected.
However,ics made previously can be taken from the cinematic.
---|---
11. Quick freeze function button
Press this button to activate or deactivate the quick freezing function. When
you activate the function, the freezer compartment will be cooled to a
temperature lower than the set value. ( )| Use the quick freeze function when
you want to quickly freeze the food placed in the fridge compartment. If you
want to freeze large amounts of fresh food, activate this function before
putting the food into the product.
---|---
| If you do not cancel it, Quick freeze will cancel itself automatically after
24 hours or when the fridge compartment reaches the required temperature.
| This function is not recalled when power restores after a power failure.
12. Economic usage indicator
Indicates that the product is running in energy-efficient mode. ( ) This
indicator will be active if the Freezer Compartment temperature is set to -16
or the energy
efficient cooling is being performed due to the Eco-Extra function.| The
economic usage indicator is turned off when quick cooling or quick freeze
functions are selected.
---|---
Freezing fresh food
-
It must be preferred to wrap or cover the food before placing them in the refrigerator.
-
Hot food must cool down to room temperature before putting them in the refrigerator.
-
The foodstuff that you want to freeze must be fresh and of good quality.
-
Foodstuff must be divided into portions according to the family’s daily or meal-based consumption needs.
-
The foodstuff must be packaged in an airtight manner to prevent them from drying even if they are going to be kept for a short time.
-
Materials to be used for packaging must be tear-proof and resistant to cold, humidity, odor, oils, and acids and they must also be airtight. Moreover, they must be well closed
and they must be made from easy-to-use materials that are suitable for deep- freeze usage. -
Frozen food must be used immediately after they are thawed and it should never be re-frozen.
-
Please observe the following instructions to obtain the best results.
- Do not freeze too large quantities of food at one time. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible.
- Placing warm food into the freezer compartment causes the cooling system to operate continuously until the food is frozen solid.
- Take special care not to mix already frozen food and fresh food.
Recommendations for the preservation of frozen food
- Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer’s instructions for a ( 4 star)frozen food storage compartment.
- To ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained, the following should be remembered:
- Put packages in the freezer as quickly as possible after purchase.
- Ensure that contents are labeled and dated.
- Do not exceed the “Use By”, and “Best Before” dates on the packaging.
Defrosting
The freezer compartment defrosts automatically.
Placing the food
Freezer compartment shelves| Various frozen food such as meat, fish, ice
cream, vegetables and etc.
---|---
Egg tray| Egg
Fridge compartment shelves| Food in pans, covered plates, and closed
containers
Fridge compartment door shelves| Small and packaged food or drinks (suchas
milk, fruit juice, and beer)
Crisper| Vegetables and fruits
Fresh zone compartment| Delicatessen products (cheese, butter, salami and
etc.)
Deep-freeze information
Food must be frozen as rapidly as possible when they are put in a refrigerator
in order to keep them of good quality.
It is possible to keep the food for a long time only at -18°C or lower
temperatures.
You can keep the freshness of food for many mon (at -18°C or lower
temperatures in the deep freeze).
WARNING!
- Foodstuff must be divided into portions according to the family’s daily or meal-based consumption needs.
- Foodstuff must be packaged in an airtight manner to prevent them from drying even if they are going to be kept for a short time.
- Materials necessary for packaging:
- Cold-resistant adhesive tape
- Self-adhesive label
- Rubber rings
- Pen
Materials to be used for packaging the foodstuff must be tear-proof and
resistant to cold, humidity, odor, oils, and acids.
Foodstuff to be frozen should not be allowed to come in contact with the
previously frozen items to prevent their partial thawing.
Frozen food must be used immediately after they are thawed and it should never
be re-frozen.
Making ice (This feature is optional)
Fill the ice container with water and place it into the freezer compartment. ice will be ready approximately in two hours.You can remove the ice in the ice container by removing it from the freezer and twisting it
Twist Ice – Matic (This feature is optional)
- Remove the water tank by rotating it to the left.
- Open the water tank cover by turning it and add water to the water tank up to the lower part of the water tank cover.
- Place the water tank in its place as shown in the figure after adding water and have it seated by rotating it in the direction of the arrow. Water shall be poured down to the ice bank.
- When ice has formed, rotate ice bank knob in the direction of the arrow to allow that the ice is dropped down to the ice drawer.
- Take the ice cubes by pulling ice drawer out.
- Pull the front face towards you in order to wash the ice bank, put it on the slides in the interior area, and push it into its place in order to replace it.
- Pull the twist cinematic unit towards you in order to remove the unit, put it on the slides on the ceiling and push it to its place in order to replace it.
Ice container
-
Remove the ice container from the freezer compartment.
-
Fill the ice container with water.
-
Place the ice container in the freezer compartment.
About two hours later, the ice is ready. -
Remove the ice container from the freezer compartment and bend it over the service plate.
Ice cubes will easily fall down to the service plate.
Fan
The fan is designed to ensure homogeneous distribution and circulation of the
cold air inside your refrigerator. The operation time of the fan may vary.
depending on the
properties of your product. While the fan works only with the compressor in
some products, the control system determines its operation time in some
products in accordance with the cooling requirement.
*For the Blue light (Depend on model)**
Fruits and vegetables stored in the crispers that are illuminated with a blue
light continue their photosynthesis by means of the wavelength effect of blue
light and thus preserve their vitamin C content.
*For HarvestFresh (Depend on model)**
Fruits and vegetables stored in crispers illuminated with the HarvestFresh
technology to preserve their vitamin content (vitamin A and C) for a longer
time thanks to the blue, green, red lights, and dark cycles, which simulate a
day cycle.
If you open the door of the refrigerator during the dark period of the HarvestFresh technology, the refrigerator will automatically detect this and enable the blue, green or red light to illuminate the crisper for your convenience. After you have closed the door of the refrigerator, the dark period will continue, representing the nighttime in a day cycle
**Description and cleaning of odor filter: optional ***
An odor filter prevents unpleasant odor build-up in your refrigerator. Pull
the cover into which the odor filter is installed downwards from the front
section and remove it as
illustrated. Leave the filter under sunlight for one day. The filter will be
cleaned during this time. Install the filter back to its place. The odor
filter must be cleaned once a year.
Chiller compartment (This feature is optional)
Use this compartment to store delicatessen that shall be stored in a lower
temperature or meat products that you will consume in a short time.
The chiller compartment is the coolest place in your refrigerator where you
can keep dairy products, meat, fish, and poultry under ideal storage
conditions. Fruits and vegetables should not be stored in this compartment.
Crisper
Crisper of the product is designed specially to keep the vegetables fresh
without losing their humility. For this purpose, cool air circulation
intensified around the crisper in general.
Using the water fountain
*This feature is optional
| The first few glasses of water taken from the fountain will normally be
warm.
---|---
| If the water fountain is not used for a long time, dispose of the first few
glasses of
water to get clean water.
- Push the arm of the water fountain with your glass. It would be easier to push the arm with your hand if you are using a soft plastic glass.
- Release the arm after filling your glass with water as you desire.
| The amount of water flowing from the fountain depends on the pressure you
apply to the arm. Release the pressure on the arm slightly as the water level
in your glass/container is increased to prevent overflow. Water shall drip if
you press the arm slightly; this is normal and it is not a malfunction.
---|---
Filling the water tank of the water fountain Water tank filling reservoir is inside the door shelf.
- Open the lid of the reservoir.
- Fill the reservoir with clean drinking water.
- Close the lid of the reservoir.
|
---|---
| Do not fill the water tank with fruit juice, fizzy beverages, alcoholic
beverages or any other liquids incompatible for use in the water fountain.
Using such liquids will cause malfunction and irreparable
damage to the water fountain. Using the fountain in this way is not within the
scope of a warranty. Certain chemicals and additives in such beverages/liquids
may cause material damage to the water tank.
---|---
| Use clean drinking water only.
| The capacity of the water tank is 3 liters; do not overfill.
Cleaning the water tank
- Remove the water filling reservoir inside the door shelf.
- Detach by holding both sides of the door shelf.
- Hold both sides of the water tank and remove at 45ºangle.
- Remove the lid and clean the water tank.
The water tank and water fountain components cannot be washed with a dishwasher.
Reversing the doors (This feature is optional)
Proceed in numerical order.
|
---|---
Maintenance and cleaning
Never use gasoline, benzene or similar substances for cleaning purposes.
We recommend that you unplug the appliance before cleaning.
Never use any sharp abrasive instrument, soap, household cleaner, detergent,
and wax polish for cleaning.
Use lukewarm water to clean the cabinet of your refrigerator and wipe it dry.
Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of
soda to one pint of water to clean the interior and wipe it dry.
Make sure that no water enters the lamp housing and other electrical items.
If your refrigerator is not going to be used for a long period of time, unplug
the power cable, remove all food, clean it and leave the door ajar.
Check door seals regularly to ensure they are clean and free from food
particles.
**** To remove door racks, remove all the contents and then simply push the
door rack upwards from the base.
Never use cleaning agents or water that contains chlorine to clean the outer
surfaces and chromium counterparts of the product. Chlorine causes corrosion
on such metal
surfaces.
Do not use sharp, abrasive tools, soap, household cleaning agents, detergents,
kerosene, fuel oil, varnish, etc. to prevent removal and deformation of the
prints on the plastic part. Use lukewarm water and a soft cloth for cleaning
and then wipe it dry.
Protection of plastic surfaces
Do not put the liquid oils or oil-cooked meals in your refrigerator in
unsealed containers as they damage the plastic surfaces of your refrigerator.
In case of spilling or
smearing oil on the plastic surfaces, clean and rinse the relevant part of the
surface at once with warm water.
Troubleshooting
Please review this list before calling the service. It will save your time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product.
The refrigerator does not operate.
· The plug is not inserted into the socket correctly. >>> Insert the plug into
the socket securely.
· The fuse of the socket which your refrigerator is connected to or the main
fuse has blown out.»Check the fuse.
Condensation on the sidewall of the fridge compartment (MULTIZONE, COOL
CONTROL, and Rea ZONE).
· Door has been opened frequently. >>>Do not open and close the door of the
refrigerator frequently.
· Ambient is very humid. >>>Do not install your refrigerator in highly humid
places.
· Food containing liquid is stored in open containers. >>>Do not store food
with liquid content in open containers.
· Door of the refrigerator is left ajar. >>>Close the door of the
refrigerator.
· Thermostat is set to a very cold level. >>>Set the thermostat to a suitable
level.
The compressor Is not running
· Protective thermic of the compressor will blow out during sudden power
failures or plug-out plug-ins as the refrigerant pressure in the cooling
system of the refrigerator has not been balanced yet. The refrigerator will
start running approximately after 6 minutes. Please call the service if the
refrigerator does not startup at the end of this period.
· The fridge is in defrost cycle. >>>This is normal for a full-automatically
defrosting refrigerator. Defrosting cycle occurs periodically. The
refrigerator is not plugged into the socket. >>>Make sure that the plug is fit
into the socket.
· Temperature settings are not made correctly. >>>Select the suitable
temperature value.
· There is a power outage. >>>Refrigerator returns to normal operation when
the power restores.
The operation noise increases when the refrigerator is running.
· The operating performance of the refrigerator may change due to the changes
in the ambient temperature. It is normal and not a fault.
The refrigerator is running frequently or for a long time.
· New products may be wider than the previous one. Larger refrigerators
operate for a longer period of time.
· The room temperature may be high. >»ft is normal that the product operates
for longer periods in hot ambient.
· The refrigerator might be plugged in recently or might be loaded with food.
When the refrigerator is plugged in or loaded with food recently, it will take longer for it to attain the set temperature. This is normal
· Large amounts of hot food might be put in the refrigerator recently. >>>Do not put hot food into the refrigerator.
· Doors might be opened frequently or left ajar for a long time. >>>The warm air that has entered the refrigerator causes the refrigerator to run for longer periods. Do not open the doors frequently
The freezer or fridge compartment door might be left ajar. >>>Check if the doors are closed completely.
The refrigerator is adjusted to a very low tern perature. >>>Adjust the refrigerator temperature to a warmer degree and wait until the temperature is achieved.·Door seal of the fridge or freezer may be soiled, worn out, broken or not properly seated. >>>Clean or replace the seal. A damaged/broken seal causes the refrigerator to run for a longer period of time in order to maintain the current temperature.The freezer temperature is very low while the fridge temperature is sufficient.
· The freezer temperature is adjusted to a very low value. >>>Adjust the freezer temperature to a warmer degree and check.
The fridge temperature is very low while the freezer temperature is sufficient.
· The fridge temperature is adjusted to a very low value. >>>Adjust the fridge temperature to a warmer degree and check.
Food kept in the fridge compartment drawers is frozen.
· The fridge temperature is adjusted to a very high value. >>>Adjust the fridge temperature to a lower value and check.
The temperature in the fridge or freezer is very high.
· The fridge temperature is adjusted to a very high value. >>>Fridge compartment temperature setting has an effect on the temperature of the freezer. Change the temperatures of the fridge or freezer and wait until the relevant compartments attain a sufficient temperature.
· Doors are opened frequently or left ajar for a long time. >>>Do not open the doors frequently.
· Door is ajar. >>>Close the door completely.
· The refrigerator is plugged in or loaded with food recently. >>>This is normal. When the refrigerator is plugged in or loaded with food recently, it will take longer for it to attain the set temperature.
· Large amounts of hot food might be put in the refrigerator recently. >>>Do not put hot food into the refrigerator.
Vibrations or noise.
· The floor is not level or stable. >>> If the refrigerator rocks when moved slowly, balance it by adjusting its feet. Also, make sure that the floor is strong enough to carry the refrigerator and level.
· The items put onto the refrigerator may cause noise. >>>Remove the items on top of the refrigerator.
There are noises coming from the refrigerator like liquid flowing, spraying, etc.
·Liquid and gas flows occur in accordance with the operating principles of your refrigerator. It is normal and not a fault.
The whistle comes from the refrigerator.
· Fans are used in order to cool the refrigerator. It is normal and not a fault.
Condensation on the inner walls of the refrigerator.
· Hot and humid weather increase icing and condensation. It is normal and not a fault
· Doors are opened frequently or left ajar for a long time. Do not open the doors frequently. Close them if they are open.
· Door is ajar. >>>Close the door completely.
Humidity occurs on the outside of the refrigerator or between the doors.
· There might be humidity in the air; this is quite normal in humid weather. When the humidity is less, condensation will disappear.
Bad odor inside the refrigerator.
· No regular cleaning is performed. >>>Clean the inside of the refrigerator regularly with a sponge, lukewarm water or carbonate dissolved in water.
· Some containers or package materials may cause the smell. >>>Use a different container or different brand packaging material.
· Food is put into the refrigerator in uncovered containers. >>>Keep the food in closed containers. Microorganisms spreading out from uncovered containers can cause unpleasant odors.
· Remove the foods that have expired best before dates and spoiled from the refrigerator.
The door is not closing.
· Food packages are preventing the door from dosing. >>>Replace the packages that are obstructing the door
· The refrigerator is not completely even on the floor. >>>Adjust the feet toba lance the refrigerator.
· The floor is not level or strong. >>>Make sure that the floor is level and capable to carry the refrigerator.
Crispers are stuck.
· The food is touching the ceiling of the drawer. >>>Rearrange food in the drawer.
DISCLAIMER / WARNING
Some (simple) failures can be adequately handled by the end-user without any safety issue or unsafe use arising, provided that they are carried out within the limits and in accordance with the following instructions (see the “Self- Repair” section).
Therefore, unless otherwise authorized in the “Self-Repair” section below, repairs shall be addressed to registered professional repairers in order to avoid safety issues. A registered professional repairer is a professional repairer that has been granted access to the instructions and spare parts list of this product by the manufacturer according to the methods described in legislative acts pursuant to Directive 2009/125/EC.
However. only the service agent (i.e. authorized professional repairers) that you can reach through the phone number given in the user manual/warranty card or through your authorized dealer may provide service under the guarantee terms. Therefore. please be advised that repairs by professional repairers (who are not authorized by Bekol shall void the guarantee.
Self-Repair
Self-repair can be done by the end-user with regard to the following spare
parts: door handles, door hinges, trays, baskets, and door gaskets (an updated
list is also available in support.beko.com as of
1st March 2021).
Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in support.beko.com. For your safety, unplug the product before attempting any self-repair.
Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in the user manuals for self-repair or which are available in support.beko.com, might give rise to safety issues not attributable to Beko, and will void the warranty of the product.
Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs falling outside the mentioned list of spare parts, contacting in such cases authorized professional repairers or registered professional repairers. On the contrary, such attempts by end-users may cause safety issues and damage the product and subsequently cause fire, flood, electrocution, and serious personal injury to occur.
By way of example, but not limited to, the following repairs must be addressed to authorized professional repairers or registered professional repairers: compressor, cooling circuit, mainboard, inverter board, display board, etc.
The manufacturer/seller cannot be held liable in any case where end-users do not comply with the above.
The spare part availability of the refrigerator that you purchased is 10 years.
During this period, original spare parts will be available to operate the refrigerator properly The minimum duration of guarantee of the refrigerator that you purchased is 24 months.