Knightsbridge FR600 600x600mm Fire Hood Instruction Manual
- June 3, 2024
- Knightsbridge
Table of Contents
Knightsbridge FR600 600x600mm Fire Hood
GENERAL INSTRUCTIONS
These instructions should be read carefully and retained after installation by
the end user for future reference and maintenance.
These instructions should be used to aid installation of the following
products:
FR600 / FR1200
SAFETY
- This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current uilding Regulations. If in any doubt, consult a qualified electrician
- Suitable for 60 minute ceilings BS476 part 23 compliant
- A clearance of 50mm is required around the cover
INSTALLATION
Fold out the fire hood, insert the brackets diagonally, and clip them into place (see Fig. 1)
Fit over the luminaire and secure with the clips provided
WARNING
Under no circumstances should the fire hood be covered with thermal insulation
Do not enclose transformers / drivers within the fire hood
GENERAL
The unit should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
WARRANTY
This product has a warranty of 5 years. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of the batch codes will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.
ML Accessories Limited LU5 4LT
www.mlaccessories.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>